Added LoRa Thing Plus, removed other accidental changes

targets/TARGET_Ambiq_Micro/TARGET_Apollo3/TARGET_LoRa_THING_PLUS_expLoRaBLE/PinNames.h

@@ -0,0 +1,129 @@
+/* 
+ * Copyright (c) 2019-2020 SparkFun Electronics
+ * SPDX-License-Identifier: MIT
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "am_bsp.h"
+#include "objects_gpio.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#define NC_VAL (int)0xFFFFFFFF
+
+typedef enum
+{
+    // Digital naming
+    D0 = 19,
+    D1 = 18,
+    D2 = 41,
+    D3 = 31,
+    D4 = 10,
+    D5 = 30,
+    D6 = 37,
+    D7 = 24,
+    D8 = 46,
+    D9 = 33,
+    D10 = 48,
+    D11 = 28,
+    D12 = 25, //SDA2
+    D13 = 27, //SCL2
+    D14 = 6,
+    D15 = 5,
+    D16 = 9, //SDA1
+    D17 = 8, //SCL1
+    D18 = 26,
+    D19 = 13,
+    D20 = 12,
+    D21 = 32,
+	D22 = 35,
+	D23 = 34,
+	D24 = 11,
+
+	//LoRa reserved pins (internal)
+	D36 = 36, //RADIO NSS
+	D38 = 38, //RADIO_MOSI
+	D39 = 39, //RADIO_BUSY
+	D40 = 40, //RADIO_DIO1
+	D42 = 42, //RADIO_CLK
+	D43 = 43, //RADIO_MISO
+	D44 = 44, //RADIO_nRESET
+	D47 = 47, //RADIO_DIO3
+
+    // Analog naming
+    A0 = D19,
+    A1 = D20,
+    A2 = D21,
+    A3 = D22,
+    A4 = D23,
+    A5 = D24,
+    A6 = D3,
+	A7 = D9,
+
+    //BUTTONs
+    SW1 = AM_BSP_GPIO_BUTTON0,
+
+    // LEDs
+    LED_BLUE = AM_BSP_GPIO_LED0,
+
+    // mbed original LED naming
+
+    LED1 = AM_BSP_GPIO_LED0,
+
+
+    // I2C
+    I2C_SCL = AM_BSP_QWIIC_I2C_SCL_PIN,
+    I2C_SDA = AM_BSP_QWIIC_I2C_SDA_PIN,
+
+    // Qwiic
+    QWIIC_SCL = I2C_SCL,
+    QWIIC_SDA = I2C_SDA,
+
+    // SPI
+    SPI_CLK = AM_BSP_PRIM_SPI_CLK_PIN,
+    SPI_SDO = AM_BSP_PRIM_SPI_SDO_PIN,
+    SPI_SDI = AM_BSP_PRIM_SPI_SDI_PIN,
+
+    // UART
+    SERIAL_TX = AM_BSP_PRIM_UART_TX_PIN,
+    SERIAL_RX = AM_BSP_PRIM_UART_RX_PIN,
+    USBTX = SERIAL_TX,
+    USBRX = SERIAL_RX,
+
+    SERIAL1_TX = D1,
+    SERIAL1_RX = D0,
+
+    // Not connected
+    NC = NC_VAL
+} PinName;
+
+#define STDIO_UART_TX USBTX
+#define STDIO_UART_RX USBRX
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif