Merge branch 'mlxsw-Add-support-for-Q-in-VNI'

Ido Schimmel says:

====================
mlxsw: Add support for Q-in-VNI

This patch set adds support for Q-in-VNI over Spectrum-{2,3} ASICs.
Q-in-VNI is like regular VxLAN encapsulation with the sole difference
that overlay packets can contain a VLAN tag. In Linux, this is achieved
by adding the VxLAN device to a 802.1ad bridge instead of a 802.1q
bridge.

From mlxsw perspective, Q-in-VNI support entails two main changes:

1. An outer VLAN tag should always be pushed to the overlay packet
during decapsulation

2. The EtherType used during decapsulation should be 802.1ad (0x88a8)
instead of the default 802.1q (0x8100)

Patch set overview:

Patches #1-#3 add required device registers and fields

Patch #4 performs small refactoring to allow code re-use

Patches #5-#7 make the EtherType used during decapsulation a property of
the tunnel port (i.e., VxLAN). This leads to the driver vetoing
configurations in which VxLAN devices are member in both 802.1ad and
802.1q/802.1d bridges. Will be handled in the future by determining the
overlay EtherType on the egress port instead

Patch #8 adds support for Q-in-VNI for Spectrum-2 and newer ASICs

Patches #9-#10 veto Q-in-VNI for Spectrum-1 ASICs due to some hardware
limitations. Can be worked around, but decided not to support it for now

Patch #11 adjusts mlxsw to stop vetoing addition of VXLAN devices to
802.1ad bridges

Patch #12 adds a generic forwarding test that can be used with both veth
pairs and physical ports with a loopback

Patch #13 adds a test to make sure mlxsw vetoes unsupported Q-in-VNI
configurations
====================

Signed-off-by: David S. Miller <[email protected]>

Author: davem330

drivers/net/ethernet/mellanox/mlxsw/reg.h

@@ -581,6 +581,13 @@ mlxsw_reg_sfd_uc_tunnel_pack(char *payload, int rec_index,
 	mlxsw_reg_sfd_uc_tunnel_protocol_set(payload, rec_index, proto);
 }
 
+enum mlxsw_reg_tunnel_port {
+	MLXSW_REG_TUNNEL_PORT_NVE,
+	MLXSW_REG_TUNNEL_PORT_VPLS,
+	MLXSW_REG_TUNNEL_PORT_FLEX_TUNNEL0,
+	MLXSW_REG_TUNNEL_PORT_FLEX_TUNNEL1,
+};
+
 /* SFN - Switch FDB Notification Register
  * -------------------------------------------
  * The switch provides notifications on newly learned FDB entries and
@@ -738,13 +745,6 @@ MLXSW_ITEM32_INDEXED(reg, sfn, uc_tunnel_protocol, MLXSW_REG_SFN_BASE_LEN, 27,
 MLXSW_ITEM32_INDEXED(reg, sfn, uc_tunnel_uip_lsb, MLXSW_REG_SFN_BASE_LEN, 0,
 		     24, MLXSW_REG_SFN_REC_LEN, 0x0C, false);
 
-enum mlxsw_reg_sfn_tunnel_port {
-	MLXSW_REG_SFN_TUNNEL_PORT_NVE,
-	MLXSW_REG_SFN_TUNNEL_PORT_VPLS,
-	MLXSW_REG_SFN_TUNNEL_FLEX_TUNNEL0,
-	MLXSW_REG_SFN_TUNNEL_FLEX_TUNNEL1,
-};
-
 /* reg_sfn_uc_tunnel_port
  * Tunnel port.
  * Reserved on Spectrum.
@@ -821,8 +821,16 @@ static inline void mlxsw_reg_spms_vid_pack(char *payload, u16 vid,
 
 MLXSW_REG_DEFINE(spvid, MLXSW_REG_SPVID_ID, MLXSW_REG_SPVID_LEN);
 
+/* reg_spvid_tport
+ * Port is tunnel port.
+ * Reserved when SwitchX/-2 or Spectrum-1.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spvid, tport, 0x00, 24, 1);
+
 /* reg_spvid_local_port
- * Local port number.
+ * When tport = 0: Local port number. Not supported for CPU port.
+ * When tport = 1: Tunnel port.
  * Access: Index
  */
 MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8);
@@ -1693,6 +1701,109 @@ static inline void mlxsw_reg_svfa_pack(char *payload, u8 local_port,
 	mlxsw_reg_svfa_vid_set(payload, vid);
 }
 
+/*  SPVTR - Switch Port VLAN Stacking Register
+ *  ------------------------------------------
+ *  The Switch Port VLAN Stacking register configures the VLAN mode of the port
+ *  to enable VLAN stacking.
+ */
+#define MLXSW_REG_SPVTR_ID 0x201D
+#define MLXSW_REG_SPVTR_LEN 0x10
+
+MLXSW_REG_DEFINE(spvtr, MLXSW_REG_SPVTR_ID, MLXSW_REG_SPVTR_LEN);
+
+/* reg_spvtr_tport
+ * Port is tunnel port.
+ * Access: Index
+ *
+ * Note: Reserved when SwitchX/-2 or Spectrum-1.
+ */
+MLXSW_ITEM32(reg, spvtr, tport, 0x00, 24, 1);
+
+/* reg_spvtr_local_port
+ * When tport = 0: local port number (Not supported from/to CPU).
+ * When tport = 1: tunnel port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, spvtr, local_port, 0x00, 16, 8);
+
+/* reg_spvtr_ippe
+ * Ingress Port Prio Mode Update Enable.
+ * When set, the Port Prio Mode is updated with the provided ipprio_mode field.
+ * Reserved on Get operations.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, spvtr, ippe, 0x04, 31, 1);
+
+/* reg_spvtr_ipve
+ * Ingress Port VID Mode Update Enable.
+ * When set, the Ingress Port VID Mode is updated with the provided ipvid_mode
+ * field.
+ * Reserved on Get operations.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, spvtr, ipve, 0x04, 30, 1);
+
+/* reg_spvtr_epve
+ * Egress Port VID Mode Update Enable.
+ * When set, the Egress Port VID Mode is updated with the provided epvid_mode
+ * field.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, spvtr, epve, 0x04, 29, 1);
+
+/* reg_spvtr_ipprio_mode
+ * Ingress Port Priority Mode.
+ * This controls the PCP and DEI of the new outer VLAN
+ * Note: for SwitchX/-2 the DEI is not affected.
+ * 0: use port default PCP and DEI (configured by QPDPC).
+ * 1: use C-VLAN PCP and DEI.
+ * Has no effect when ipvid_mode = 0.
+ * Reserved when tport = 1.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvtr, ipprio_mode, 0x04, 20, 4);
+
+enum mlxsw_reg_spvtr_ipvid_mode {
+	/* IEEE Compliant PVID (default) */
+	MLXSW_REG_SPVTR_IPVID_MODE_IEEE_COMPLIANT_PVID,
+	/* Push VLAN (for VLAN stacking, except prio tagged packets) */
+	MLXSW_REG_SPVTR_IPVID_MODE_PUSH_VLAN_FOR_UNTAGGED_PACKET,
+	/* Always push VLAN (also for prio tagged packets) */
+	MLXSW_REG_SPVTR_IPVID_MODE_ALWAYS_PUSH_VLAN,
+};
+
+/* reg_spvtr_ipvid_mode
+ * Ingress Port VLAN-ID Mode.
+ * For Spectrum family, this affects the values of SPVM.i
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvtr, ipvid_mode, 0x04, 16, 4);
+
+enum mlxsw_reg_spvtr_epvid_mode {
+	/* IEEE Compliant VLAN membership */
+	MLXSW_REG_SPVTR_EPVID_MODE_IEEE_COMPLIANT_VLAN_MEMBERSHIP,
+	/* Pop VLAN (for VLAN stacking) */
+	MLXSW_REG_SPVTR_EPVID_MODE_POP_VLAN,
+};
+
+/* reg_spvtr_epvid_mode
+ * Egress Port VLAN-ID Mode.
+ * For Spectrum family, this affects the values of SPVM.e,u,pt.
+ * Access: WO
+ */
+MLXSW_ITEM32(reg, spvtr, epvid_mode, 0x04, 0, 4);
+
+static inline void mlxsw_reg_spvtr_pack(char *payload, bool tport,
+					u8 local_port,
+					enum mlxsw_reg_spvtr_ipvid_mode ipvid_mode)
+{
+	MLXSW_REG_ZERO(spvtr, payload);
+	mlxsw_reg_spvtr_tport_set(payload, tport);
+	mlxsw_reg_spvtr_local_port_set(payload, local_port);
+	mlxsw_reg_spvtr_ipvid_mode_set(payload, ipvid_mode);
+	mlxsw_reg_spvtr_ipve_set(payload, true);
+}
+
 /* SVPE - Switch Virtual-Port Enabling Register
  * --------------------------------------------
  * Enables port virtualization.
@@ -10507,13 +10618,6 @@ enum mlxsw_reg_tnumt_record_type {
  */
 MLXSW_ITEM32(reg, tnumt, record_type, 0x00, 28, 4);
 
-enum mlxsw_reg_tnumt_tunnel_port {
-	MLXSW_REG_TNUMT_TUNNEL_PORT_NVE,
-	MLXSW_REG_TNUMT_TUNNEL_PORT_VPLS,
-	MLXSW_REG_TNUMT_TUNNEL_FLEX_TUNNEL0,
-	MLXSW_REG_TNUMT_TUNNEL_FLEX_TUNNEL1,
-};
-
 /* reg_tnumt_tunnel_port
  * Tunnel port.
  * Access: RW
@@ -10561,7 +10665,7 @@ MLXSW_ITEM32_INDEXED(reg, tnumt, udip_ptr, 0x0C, 0, 24, 0x04, 0x00, false);
 
 static inline void mlxsw_reg_tnumt_pack(char *payload,
 					enum mlxsw_reg_tnumt_record_type type,
-					enum mlxsw_reg_tnumt_tunnel_port tport,
+					enum mlxsw_reg_tunnel_port tport,
 					u32 underlay_mc_ptr, bool vnext,
 					u32 next_underlay_mc_ptr,
 					u8 record_size)
@@ -10725,13 +10829,6 @@ static inline void mlxsw_reg_tndem_pack(char *payload, u8 underlay_ecn,
 
 MLXSW_REG_DEFINE(tnpc, MLXSW_REG_TNPC_ID, MLXSW_REG_TNPC_LEN);
 
-enum mlxsw_reg_tnpc_tunnel_port {
-	MLXSW_REG_TNPC_TUNNEL_PORT_NVE,
-	MLXSW_REG_TNPC_TUNNEL_PORT_VPLS,
-	MLXSW_REG_TNPC_TUNNEL_FLEX_TUNNEL0,
-	MLXSW_REG_TNPC_TUNNEL_FLEX_TUNNEL1,
-};
-
 /* reg_tnpc_tunnel_port
  * Tunnel port.
  * Access: Index
@@ -10751,7 +10848,7 @@ MLXSW_ITEM32(reg, tnpc, learn_enable_v6, 0x04, 1, 1);
 MLXSW_ITEM32(reg, tnpc, learn_enable_v4, 0x04, 0, 1);
 
 static inline void mlxsw_reg_tnpc_pack(char *payload,
-				       enum mlxsw_reg_tnpc_tunnel_port tport,
+				       enum mlxsw_reg_tunnel_port tport,
 				       bool learn_enable)
 {
 	MLXSW_REG_ZERO(tnpc, payload);
@@ -11320,6 +11417,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
 	MLXSW_REG(slcor),
 	MLXSW_REG(spmlr),
 	MLXSW_REG(svfa),
+	MLXSW_REG(spvtr),
 	MLXSW_REG(svpe),
 	MLXSW_REG(sfmr),
 	MLXSW_REG(spvmlr),

drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -384,7 +384,7 @@ int mlxsw_sp_port_vid_learning_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid,
 	return err;
 }
 
-static int mlxsw_sp_ethtype_to_sver_type(u16 ethtype, u8 *p_sver_type)
+int mlxsw_sp_ethtype_to_sver_type(u16 ethtype, u8 *p_sver_type)
 {
 	switch (ethtype) {
 	case ETH_P_8021Q:

drivers/net/ethernet/mellanox/mlxsw/spectrum.h

@@ -584,6 +584,7 @@ int mlxsw_sp_port_vid_stp_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid,
 int mlxsw_sp_port_vp_mode_set(struct mlxsw_sp_port *mlxsw_sp_port, bool enable);
 int mlxsw_sp_port_vid_learning_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid,
 				   bool learn_enable);
+int mlxsw_sp_ethtype_to_sver_type(u16 ethtype, u8 *p_sver_type);
 int mlxsw_sp_port_pvid_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid,
 			   u16 ethtype);
 struct mlxsw_sp_port_vlan *
@@ -1202,6 +1203,7 @@ struct mlxsw_sp_nve_params {
 	enum mlxsw_sp_nve_type type;
 	__be32 vni;
 	const struct net_device *dev;
+	u16 ethertype;
 };
 
 extern const struct mlxsw_sp_nve_ops *mlxsw_sp1_nve_ops_arr[];

drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c

@@ -368,7 +368,7 @@ mlxsw_sp_nve_mc_record_refresh(struct mlxsw_sp_nve_mc_record *mc_record)
 		next_valid = true;
 	}
 
-	mlxsw_reg_tnumt_pack(tnumt_pl, type, MLXSW_REG_TNUMT_TUNNEL_PORT_NVE,
+	mlxsw_reg_tnumt_pack(tnumt_pl, type, MLXSW_REG_TUNNEL_PORT_NVE,
 			     mc_record->kvdl_index, next_valid,
 			     next_kvdl_index, mc_record->num_entries);
 
@@ -798,11 +798,11 @@ int mlxsw_sp_nve_fid_enable(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_fid *fid,
 
 	ops = nve->nve_ops_arr[params->type];
 
-	if (!ops->can_offload(nve, params->dev, extack))
+	if (!ops->can_offload(nve, params, extack))
 		return -EINVAL;
 
 	memset(&config, 0, sizeof(config));
-	ops->nve_config(nve, params->dev, &config);
+	ops->nve_config(nve, params, &config);
 	if (nve->num_nve_tunnels &&
 	    memcmp(&config, &nve->config, sizeof(config))) {
 		NL_SET_ERR_MSG_MOD(extack, "Conflicting NVE tunnels configuration");

drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h

@@ -18,6 +18,7 @@ struct mlxsw_sp_nve_config {
 	u32 ul_tb_id;
 	enum mlxsw_sp_l3proto ul_proto;
 	union mlxsw_sp_l3addr ul_sip;
+	u16 ethertype;
 };
 
 struct mlxsw_sp_nve {
@@ -35,10 +36,10 @@ struct mlxsw_sp_nve {
 struct mlxsw_sp_nve_ops {
 	enum mlxsw_sp_nve_type type;
 	bool (*can_offload)(const struct mlxsw_sp_nve *nve,
-			    const struct net_device *dev,
+			    const struct mlxsw_sp_nve_params *params,
 			    struct netlink_ext_ack *extack);
 	void (*nve_config)(const struct mlxsw_sp_nve *nve,
-			   const struct net_device *dev,
+			   const struct mlxsw_sp_nve_params *params,
 			   struct mlxsw_sp_nve_config *config);
 	int (*init)(struct mlxsw_sp_nve *nve,
 		    const struct mlxsw_sp_nve_config *config);