adding cryptpad !

[arsoninstigator]

cryptpad !

[X] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
[X] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
[X] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
[X] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
[X] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
[X] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:

• Full render including all the parts
• A few sentences about the inspiration and challenges
• BOM
• Photos of the Schematic, PCB, and case

[vercel]

The latest updates on your projects. Learn more about Vercel for Git ↗︎

Name	Status	Preview	Comments	Updated (UTC)
hackpad	✅ Ready (Inspect)	Visit Preview	💬 Add feedback	Feb 21, 2025 9:02pm

[PythonAtSea]

The XAIO is too far in, you won't be able to plug in your usb cable. The little rectangle on the side is the usb port, it should be hanging off the edge slightly. Other than that it looks good

[arsoninstigator]

I only need to change up the case, is that correct?

[Gamer153]

From what I can see, your switch on the rotary encoder is wired incorrectly - instead of one connection to ROW0 and one to ROW1, one of the switch pins should be wired to COL3 and one to ROW0 so it's wired like all the other switches.

For the XIAO being too far in, the problem mainly is that your PCB extends too much - the port on the footprint should hang over the PCB edge in Kicad slightly, so the port is not entirely over the PCB but instead extends forward over the edge a bit.

[M0HID]

Wow, this looks so cool!! You can order your Hackpad here!