Turtlepad, finished

[OmTagdiwala]

Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.

Check off the following to let the reviewers know you've done everything:
[✓] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
[✓] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
[✓] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
[✓] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
[✓] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
[✓] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:

• Full render including all the parts
• A few sentences about the inspiration and challenges
• BOM
• Photos of the Schematic, PCB, and case

If you're unsure about the format, make sure to check out this example and follow the format there.

If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!

[vercel]

The latest updates on your projects. Learn more about Vercel for Git ↗︎

Name	Status	Preview	Comments	Updated (UTC)
hackpad	✅ Ready (Inspect)	Visit Preview	💬 Add feedback	Mar 29, 2025 10:11pm

[Nickdev8]

I approve this submission. My approved PR: 507
i love the case design!!

[cheyao]

You have shorted your 5V and GND! Also I'm not sure if the xiao will fit in that case, please double check.

else lgtm #4

[OmTagdiwala]

You have shorted your 5V and GND! Also I'm not sure if the xiao will fit in that case, please double check.

else lgtm #4

do i need to reopen a new pull request to make the changes 😭

[pmnlla]

I'd like to bring up a couple of things.

1. The hole for your XIAO to poke out of the side of the case is 6.2mm high. I can definitely find USB-C cables around my room that exceed that in thickness, and can also find some that don't. You certainly have material to play around with, so if you wish, you can dink the board a little deeper into the case and add some more wiggle room for the cable going into the XIAO.
2. How do the tolerances between the plate, PCB, and case look? Plastic expands as it comes out of a 3d printer, and you'll want to add a small gap between the plate and the case, as well as the case and the PCB, to amount for this. If you accounted for this, you're golden!

Your schematic looks pretty much finished, with no shorts, and your PCB has no errors when put through DRC.

Not approving, as I didn't do V2 and lack the authority to do so 🤣

[souptik-samanta]

LGTM #85 & #477

[qcoral]

forms.hackclub.com/hackpadv2