Not connected at /usr/local/bin/sendat.pl line 13.

[DevilSkyme]

Not connected at /usr/local/bin/sendat.pl line 13. Armbian x64/Ubuntu.

[ezbik]

So it means the device you try to connect to, isn't a tty serial device.

[DevilSkyme]

sudo Fibocom_L860_hlp.sh eth2 data_on
=> Data On
= checking if already online..
= not online, bring it online
= flush buffer from
(standard_in) 1: syntax error
(standard_in) 2: syntax error
(standard_in) 1: syntax error
= will use APN internet.yota.ru
= sleep 3 before getting CGATT status..
= sleep end
= [wait_CGATT] wait till connected AT+CGATT is 1
= [wait_CGATT] attempt 1/8
Not connected at /usr/local/bin/sendat.pl line 13.
= [wait_CGATT] attempt 2/8
Not connected at /usr/local/bin/sendat.pl line 13.
= [wait_CGATT] attempt 3/8
Not connected at /usr/local/bin/sendat.pl line 13.
= [wait_CGATT] attempt 4/8
Not connected at /usr/local/bin/sendat.pl line 13.
= [wait_CGATT] attempt 5/8
Not connected at /usr/local/bin/sendat.pl line 13.
= [wait_CGATT] attempt 6/8
Not connected at /usr/local/bin/sendat.pl line 13.
= [wait_CGATT] attempt 7/8
Not connected at /usr/local/bin/sendat.pl line 13.
= [wait_CGATT] attempt 8/8
Not connected at /usr/local/bin/sendat.pl line 13.
= [wait_CGATT] still AT+CGATT not OK

[ezbik]

sudo Fibocom_L860_hlp.sh eth2 dump
please show output.

[DevilSkyme]

user@PC:~$ sudo Fibocom_L860_hlp.sh eth2 dump
(standard_in) 1: syntax error
(standard_in) 2: syntax error
(standard_in) 1: syntax error
{
"DEV": "eth2",
"AT_DEV": "",
"IMEI": "",
"ICCID": "",
"SIM_STATUS": "unknown_sim_status",
"SIGNAL": null,
"CELLOP": "",
"NET_TYPE": "",
"BAND": "",
"LTE_CA": " bw=",
"CID": "",
"LAC": "",
"APN": "",
"DATA_CONNECTED": "no",
"WAN_IP": "",
"WAN_GW": "",
"WAN_NETMASK": "",
"WAN_DNS1": "",
"WAN_DNS2": "",
"WAN_IP6": "",
"WAN_NETMASK6": "",
"XDATACHANNEL": null,
"MCCMNC": "",
"LOCAL_IP": ""
}

[DevilSkyme]

Здравствуйте, так в чем может быть проблема? PPP работает.

[ezbik]

(standard_in) 1: syntax error

вот это говорит, что какая-то проблема в скрипте, не может даже AT порт определить. Напишите мне письмо (данные в профиле).

[DevilSkyme]

Здравствуйте, нашел время и указал путь до ACM2 в скрипте вручную. И ошибка syntax error исчезла.

Но теперь такой вывод. Он не может создать интепфейс для коннекта. Указывал существущий свободный enp1s0, но там нету инета. Куда копнуть?

user@PC::~$ sudo Fibocom_L860_hlp.sh wwan0 data_on
=> Data On
= checking if already online..
Device "wwan0" does not exist.
= not online, bring it online
= flush buffer from /dev/ttyACM2
= will use APN internet
=> serial port /dev/ttyACM2 connected!
=> AT+CFUN=4
OK
=> AT+CGDCONT=2
ERROR
=> AT+CGDCONT=1
ERROR
=> AT+CGDCONT=0
OK
=> AT+CGDCONT=0,"ip","internet"
OK
=> AT+XDNS=0,1
OK
=> AT+CGDCONT?
+CGDCONT: 3,"IP","internet.yota.ru","0.0.0.0",0,0,0,0,0,0,0,0,0,0

+CGDCONT: 4,"IPV6","internet.yota.ru","0:0:0:0:0:0:0:0",0,0,0,0,0,0,0,0,0,0

+CGDCONT: 5,"IPV4V6","internet.yota.ru","0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0,0,0,0,0,0,0

+CGDCONT: 6,"IPV4V6","internet.yota","0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0,0,0,0,0,0,0

+CGDCONT: 7,"IPV4V6","internet","0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0,0,0,0,0,0,0

+CGDCONT: 8,"IPV4V6","internet","0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0,0,0,0,0,0,0

+CGDCONT: 9,"IP","internet.yota","0.0.0.0",0,0,0,0,0,0,0,0,0,0

+CGDCONT: 10,"IPV6","internet.yota","0:0:0:0:0:0:0:0",0,0,0,0,0,0,0,0,0,0

+CGDCONT: 11,"IPV4V6","internet.yota","0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0,0,0,0,0,0,0

+CGDCONT: 0,"IP","internet","0.0.0.0",0,0,0,0,0,0,0,0,0,0

OK
=> AT+XDATACHANNEL=1,1,"/USBCDC/0","/USBHS/NCM/0",2,0
OK
=> AT+CFUN=1
OK
=> AT+CGDATA=M-RAW_IP,0

= sleep 3 before getting CGATT status..
= sleep end
= [wait_CGATT] wait till connected AT+CGATT is 1
= [wait_CGATT] attempt 1/8
= [wait_CGATT] CGATT connected
= sleep 3 before getting WAN_IP..
= sleep end
= attempt 1
= connected
= IFUP
= [_ifup] getting current status
= DATA connected; WAN_IP 100.76.XXX.XXX WAN_GW 100.76.XXX.XXX
Device "wwan0" does not exist.
Device "wwan0" does not exist.
SIOCSIFADDR: No such device
eth2: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
eth2: ERROR while getting interface flags: No such device
Cannot find device "wwan0"

[DevilSkyme]

Вывод дампа на существущем интерфейсе enp1s0. Но пинг не проходит.
{
"DEV": "enp1s0",
"AT_DEV": "/dev/ttyACM2",
"IMEI": "35930004394XXXX",
"ICCID": "897011102420XXXXXXXX",
"SIM_STATUS": "READY",
"SIGNAL": {
"rssi": "-107",
"Bit_err_rate_perc": "3",
"rsrp": "-108",
"rsrq": "-31.5",
"SINR": "6"
},
"CELLOP": "YOTA",
"NET_TYPE": "LTE",
"BAND": "BAND_LTE_7",
"LTE_CA": "single cell bw=20",
"CID": "040BF60D",
"LAC": "FFFF",
"APN": "internet.yota.ru",
"DATA_CONNECTED": "OK connected",
"WAN_IP": "100.108.XXX.XXX",
"WAN_GW": "100.108.XXX.XXX",
"WAN_NETMASK": "255.0.0.0",
"WAN_DNS1": "10.93.XXX.XXX",
"WAN_DNS2": "10.93.XXX.XXX",
"WAN_IP6": "",
"WAN_NETMASK6": "",
"XDATACHANNEL": 0,
"MCCMNC": "25011",
"LOCAL_IP": "100.108.XXX.XXX"
}

[ezbik]

Device "wwan0" does not exist.

почему у вас композиция модема такая что он не выставляет свой WWAN интерфейс? Указывайте его интерфейс реально рабочий.
Запускать на Ethernet интерфейсе enp1s0 нет смысла.