Initialize README #1

PlaidCat · 2024-09-09T22:34:49Z

Basical Boiler Plate explination of how this repo will work.

gvrose8192

Thanks Maple!

jira LE-1907 cve CVE-2024-27014 Rebuild_History Non-Buildable kernel-4.18.0-553.5.1.el8_10 commit-author Carolina Jubran <[email protected]> commit fef9657 When disabling aRFS under the `priv->state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I ------------------------------------------------------ ethtool/386089 is trying to acquire lock: ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0 but task is already holding lock: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x80/0xc90 arfs_handle_work+0x4b/0x3b0 [mlx5_core] process_one_work+0x1dc/0x4a0 worker_thread+0x1bf/0x3c0 kthread+0xd7/0x100 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}: __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 __flush_work+0x7a/0x4e0 __cancel_work_timer+0x131/0x1c0 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); *** DEADLOCK *** 3 locks held by ethtool/386089: #0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240 #2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] stack backtrace: CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0xa0 check_noncircular+0x144/0x160 __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 ? __flush_work+0x74/0x4e0 ? save_trace+0x3e/0x360 ? __flush_work+0x74/0x4e0 __flush_work+0x7a/0x4e0 ? __flush_work+0x74/0x4e0 ? __lock_acquire+0xa78/0x2c80 ? lock_acquire+0xd0/0x2b0 ? mark_held_locks+0x49/0x70 __cancel_work_timer+0x131/0x1c0 ? mark_held_locks+0x49/0x70 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 ? ethnl_ops_begin+0xb0/0xb0 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 ? do_user_addr_fault+0x53f/0x8f0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> Fixes: 45bf454 ("net/mlx5e: Enabling aRFS mechanism") Signed-off-by: Carolina Jubran <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit fef9657) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-4.18.0-553.5.1.el8_10 commit-author Petr Pavlu <[email protected]> commit d559015 Empty-Commit: Cherry-Pick Conflicts during history rebuild. Will be included in final tarball splat. Ref for failed cherry-pick at: ciq/ciq_backports/kernel-4.18.0-553.5.1.el8_10/d5590152.failed When making a DNS query inside the kernel using dns_query(), the request code can in rare cases end up creating a duplicate index key in the assoc_array of the destination keyring. It is eventually found by a BUG_ON() check in the assoc_array implementation and results in a crash. Example report: [2158499.700025] kernel BUG at ../lib/assoc_array.c:652! [2158499.700039] invalid opcode: 0000 [#1] SMP PTI [2158499.700065] CPU: 3 PID: 31985 Comm: kworker/3:1 Kdump: loaded Not tainted 5.3.18-150300.59.90-default #1 SLE15-SP3 [2158499.700096] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [2158499.700351] Workqueue: cifsiod cifs_resolve_server [cifs] [2158499.700380] RIP: 0010:assoc_array_insert+0x85f/0xa40 [2158499.700401] Code: ff 74 2b 48 8b 3b 49 8b 45 18 4c 89 e6 48 83 e7 fe e8 95 ec 74 00 3b 45 88 7d db 85 c0 79 d4 0f 0b 0f 0b 0f 0b e8 41 f2 be ff <0f> 0b 0f 0b 81 7d 88 ff ff ff 7f 4c 89 eb 4c 8b ad 58 ff ff ff 0f [2158499.700448] RSP: 0018:ffffc0bd6187faf0 EFLAGS: 00010282 [2158499.700470] RAX: ffff9f1ea7da2fe8 RBX: ffff9f1ea7da2fc1 RCX: 0000000000000005 [2158499.700492] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [2158499.700515] RBP: ffffc0bd6187fbb0 R08: ffff9f185faf1100 R09: 0000000000000000 [2158499.700538] R10: ffff9f1ea7da2cc0 R11: 000000005ed8cec8 R12: ffffc0bd6187fc28 [2158499.700561] R13: ffff9f15feb8d000 R14: ffff9f1ea7da2fc0 R15: ffff9f168dc0d740 [2158499.700585] FS: 0000000000000000(0000) GS:ffff9f185fac0000(0000) knlGS:0000000000000000 [2158499.700610] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2158499.700630] CR2: 00007fdd94fca238 CR3: 0000000809d8c006 CR4: 00000000003706e0 [2158499.700702] Call Trace: [2158499.700741] ? key_alloc+0x447/0x4b0 [2158499.700768] ? __key_link_begin+0x43/0xa0 [2158499.700790] __key_link_begin+0x43/0xa0 [2158499.700814] request_key_and_link+0x2c7/0x730 [2158499.700847] ? dns_resolver_read+0x20/0x20 [dns_resolver] [2158499.700873] ? key_default_cmp+0x20/0x20 [2158499.700898] request_key_tag+0x43/0xa0 [2158499.700926] dns_query+0x114/0x2ca [dns_resolver] [2158499.701127] dns_resolve_server_name_to_ip+0x194/0x310 [cifs] [2158499.701164] ? scnprintf+0x49/0x90 [2158499.701190] ? __switch_to_asm+0x40/0x70 [2158499.701211] ? __switch_to_asm+0x34/0x70 [2158499.701405] reconn_set_ipaddr_from_hostname+0x81/0x2a0 [cifs] [2158499.701603] cifs_resolve_server+0x4b/0xd0 [cifs] [2158499.701632] process_one_work+0x1f8/0x3e0 [2158499.701658] worker_thread+0x2d/0x3f0 [2158499.701682] ? process_one_work+0x3e0/0x3e0 [2158499.701703] kthread+0x10d/0x130 [2158499.701723] ? kthread_park+0xb0/0xb0 [2158499.701746] ret_from_fork+0x1f/0x40 The situation occurs as follows: * Some kernel facility invokes dns_query() to resolve a hostname, for example, "abcdef". The function registers its global DNS resolver cache as current->cred.thread_keyring and passes the query to request_key_net() -> request_key_tag() -> request_key_and_link(). * Function request_key_and_link() creates a keyring_search_context object. Its match_data.cmp method gets set via a call to type->match_preparse() (resolves to dns_resolver_match_preparse()) to dns_resolver_cmp(). * Function request_key_and_link() continues and invokes search_process_keyrings_rcu() which returns that a given key was not found. The control is then passed to request_key_and_link() -> construct_alloc_key(). * Concurrently to that, a second task similarly makes a DNS query for "abcdef." and its result gets inserted into the DNS resolver cache. * Back on the first task, function construct_alloc_key() first runs __key_link_begin() to determine an assoc_array_edit operation to insert a new key. Index keys in the array are compared exactly as-is, using keyring_compare_object(). The operation finds that "abcdef" is not yet present in the destination keyring. * Function construct_alloc_key() continues and checks if a given key is already present on some keyring by again calling search_process_keyrings_rcu(). This search is done using dns_resolver_cmp() and "abcdef" gets matched with now present key "abcdef.". * The found key is linked on the destination keyring by calling __key_link() and using the previously calculated assoc_array_edit operation. This inserts the "abcdef." key in the array but creates a duplicity because the same index key is already present. Fix the problem by postponing __key_link_begin() in construct_alloc_key() until an actual key which should be linked into the destination keyring is determined. [[email protected]: added a fixes tag and cc to stable] Cc: [email protected] # v5.3+ Fixes: df593ee ("keys: Hoist locking out of __key_link_begin()") Signed-off-by: Petr Pavlu <[email protected]> Reviewed-by: Joey Lee <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> (cherry picked from commit d559015) Signed-off-by: Jonathan Maple <[email protected]> # Conflicts: # security/keys/request_key.c

jira LE-1907 cve CVE-2024-26906 Rebuild_History Non-Buildable kernel-4.18.0-553.8.1.el8_10 commit-author Hou Tao <[email protected]> commit 32019c6 Empty-Commit: Cherry-Pick Conflicts during history rebuild. Will be included in final tarball splat. Ref for failed cherry-pick at: ciq/ciq_backports/kernel-4.18.0-553.8.1.el8_10/32019c65.failed When trying to use copy_from_kernel_nofault() to read vsyscall page through a bpf program, the following oops was reported: BUG: unable to handle page fault for address: ffffffffff600000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:copy_from_kernel_nofault+0x6f/0x110 ...... Call Trace: <TASK> ? copy_from_kernel_nofault+0x6f/0x110 bpf_probe_read_kernel+0x1d/0x50 bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d trace_call_bpf+0xc5/0x1c0 perf_call_bpf_enter.isra.0+0x69/0xb0 perf_syscall_enter+0x13e/0x200 syscall_trace_enter+0x188/0x1c0 do_syscall_64+0xb5/0xe0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ...... ---[ end trace 0000000000000000 ]--- The oops is triggered when: 1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall page and invokes copy_from_kernel_nofault() which in turn calls __get_user_asm(). 2) Because the vsyscall page address is not readable from kernel space, a page fault exception is triggered accordingly. 3) handle_page_fault() considers the vsyscall page address as a user space address instead of a kernel space address. This results in the fix-up setup by bpf not being applied and a page_fault_oops() is invoked due to SMAP. Considering handle_page_fault() has already considered the vsyscall page address as a userspace address, fix the problem by disallowing vsyscall page read for copy_from_kernel_nofault(). Originally-by: Thomas Gleixner <[email protected]> Reported-by: [email protected] Closes: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com Reported-by: xingwei lee <[email protected]> Closes: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com Signed-off-by: Hou Tao <[email protected]> Reviewed-by: Sohil Mehta <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> (cherry picked from commit 32019c6) Signed-off-by: Jonathan Maple <[email protected]> # Conflicts: # arch/x86/mm/maccess.c

jira LE-1907 cve CVE-2021-46972 Rebuild_History Non-Buildable kernel-4.18.0-553.8.1.el8_10 commit-author Mickaël Salaün <[email protected]> commit eaab1d4 Since commit 6815f47 ("ovl: use only uppermetacopy state in ovl_lookup()"), overlayfs doesn't put temporary dentry when there is a metacopy error, which leads to dentry leaks when shutting down the related superblock: overlayfs: refusing to follow metacopy origin for (/file0) ... BUG: Dentry (____ptrval____){i=3f33,n=file3} still in use (1) [unmount of overlay overlay] ... WARNING: CPU: 1 PID: 432 at umount_check.cold+0x107/0x14d CPU: 1 PID: 432 Comm: unmount-overlay Not tainted 5.12.0-rc5 #1 ... RIP: 0010:umount_check.cold+0x107/0x14d ... Call Trace: d_walk+0x28c/0x950 ? dentry_lru_isolate+0x2b0/0x2b0 ? __kasan_slab_free+0x12/0x20 do_one_tree+0x33/0x60 shrink_dcache_for_umount+0x78/0x1d0 generic_shutdown_super+0x70/0x440 kill_anon_super+0x3e/0x70 deactivate_locked_super+0xc4/0x160 deactivate_super+0xfa/0x140 cleanup_mnt+0x22e/0x370 __cleanup_mnt+0x1a/0x30 task_work_run+0x139/0x210 do_exit+0xb0c/0x2820 ? __kasan_check_read+0x1d/0x30 ? find_held_lock+0x35/0x160 ? lock_release+0x1b6/0x660 ? mm_update_next_owner+0xa20/0xa20 ? reacquire_held_locks+0x3f0/0x3f0 ? __sanitizer_cov_trace_const_cmp4+0x22/0x30 do_group_exit+0x135/0x380 __do_sys_exit_group.isra.0+0x20/0x20 __x64_sys_exit_group+0x3c/0x50 do_syscall_64+0x45/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae ... VFS: Busy inodes after unmount of overlay. Self-destruct in 5 seconds. Have a nice day... This fix has been tested with a syzkaller reproducer. Cc: Amir Goldstein <[email protected]> Cc: <[email protected]> # v5.8+ Reported-by: syzbot <[email protected]> Fixes: 6815f47 ("ovl: use only uppermetacopy state in ovl_lookup()") Signed-off-by: Mickaël Salaün <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Vivek Goyal <[email protected]> Signed-off-by: Miklos Szeredi <[email protected]> (cherry picked from commit eaab1d4) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2024-26859 Rebuild_History Non-Buildable kernel-4.18.0-553.8.1.el8_10 commit-author Thinh Tran <[email protected]> commit d27e2da Fix race condition leading to system crash during EEH error handling During EEH error recovery, the bnx2x driver's transmit timeout logic could cause a race condition when handling reset tasks. The bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(), which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload() SGEs are freed using bnx2x_free_rx_sge_range(). However, this could overlap with the EEH driver's attempt to reset the device using bnx2x_io_slot_reset(), which also tries to free SGEs. This race condition can result in system crashes due to accessing freed memory locations in bnx2x_free_rx_sge() 799 static inline void bnx2x_free_rx_sge(struct bnx2x *bp, 800 struct bnx2x_fastpath *fp, u16 index) 801 { 802 struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; 803 struct page *page = sw_buf->page; .... where sw_buf was set to NULL after the call to dma_unmap_page() by the preceding thread. EEH: Beginning: 'slot_reset' PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset() bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing... bnx2x 0011:01:00.0: enabling device (0140 -> 0142) bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000025065fc Oops: Kernel access of bad area, sig: 11 [#1] ..... Call Trace: [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable) [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0 [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550 [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60 [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170 [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0 [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64 To solve this issue, we need to verify page pool allocations before freeing. Fixes: 4cace67 ("bnx2x: Alloc 4k fragment for each rx ring buffer element") Signed-off-by: Thinh Tran <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit d27e2da) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2024-35959 Rebuild_History Non-Buildable kernel-4.18.0-553.8.1.el8_10 commit-author Carolina Jubran <[email protected]> commit ecb8294 When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using lockdep_is_held(). Acquire the state_lock in mlx5e_selq_cleanup(). Kernel log: ============================= WARNING: suspicious RCU usage 6.8.0-rc3_net_next_841a9b5 #1 Not tainted ----------------------------- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by systemd-modules/293: #0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core] #1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core] stack backtrace: CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x8a/0xa0 lockdep_rcu_suspicious+0x154/0x1a0 mlx5e_selq_apply+0x94/0xa0 [mlx5_core] mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core] mlx5e_priv_init+0x2be/0x2f0 [mlx5_core] mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core] rdma_init_netdev+0x4e/0x80 [ib_core] ? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core] ipoib_intf_init+0x64/0x550 [ib_ipoib] ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib] ipoib_add_one+0xb0/0x360 [ib_ipoib] add_client_context+0x112/0x1c0 [ib_core] ib_register_client+0x166/0x1b0 [ib_core] ? 0xffffffffa0573000 ipoib_init_module+0xeb/0x1a0 [ib_ipoib] do_one_initcall+0x61/0x250 do_init_module+0x8a/0x270 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x17d/0x230 __x64_sys_finit_module+0x61/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> Fixes: 8bf30be ("net/mlx5e: Introduce select queue parameters") Signed-off-by: Carolina Jubran <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Reviewed-by: Dragos Tatulea <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit ecb8294) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2024-36004 Rebuild_History Non-Buildable kernel-4.18.0-553.8.1.el8_10 commit-author Sindhu Devale <[email protected]> commit 2cc7d15 Issue reported by customer during SRIOV testing, call trace: When both i40e and the i40iw driver are loaded, a warning in check_flush_dependency is being triggered. This seems to be because of the i40e driver workqueue is allocated with the WQ_MEM_RECLAIM flag, and the i40iw one is not. Similar error was encountered on ice too and it was fixed by removing the flag. Do the same for i40e too. [Feb 9 09:08] ------------[ cut here ]------------ [ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966 check_flush_dependency+0x10b/0x120 [ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod fuse [ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1 [ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 [ +0.000001] Workqueue: i40e i40e_service_task [i40e] [ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120 [ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48 81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90 [ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282 [ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX: 0000000000000027 [ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI: ffff94d47f620bc0 [ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffff7fff [ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12: ffff94c5451ea180 [ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15: ffff94c5f1330ab0 [ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4: 00000000007706f0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] ? __warn+0x80/0x130 [ +0.000003] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? report_bug+0x195/0x1a0 [ +0.000005] ? handle_bug+0x3c/0x70 [ +0.000003] ? exc_invalid_op+0x14/0x70 [ +0.000002] ? asm_exc_invalid_op+0x16/0x20 [ +0.000006] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? check_flush_dependency+0x10b/0x120 [ +0.000002] __flush_workqueue+0x126/0x3f0 [ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core] [ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core] [ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core] [ +0.000020] i40iw_close+0x4b/0x90 [irdma] [ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e] [ +0.000035] i40e_service_task+0x126/0x190 [i40e] [ +0.000024] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27e/0x390 [ +0.000001] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xdf/0x110 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork+0x2d/0x50 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000001] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: 4d5957c ("i40e: remove WQ_UNBOUND and the task limit of our workqueue") Signed-off-by: Sindhu Devale <[email protected]> Reviewed-by: Arkadiusz Kubalewski <[email protected]> Reviewed-by: Mateusz Polchlopek <[email protected]> Signed-off-by: Aleksandr Loktionov <[email protected]> Tested-by: Robert Ganzynkowicz <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit 2cc7d15) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2024-36886 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Paolo Abeni <[email protected]> commit 080cbb8 Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported a UAF in the tipc_buf_append() error path: BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 Read of size 8 at addr ffff88804d2a7c80 by task poc/8034 CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 Call Trace: <IRQ> __dump_stack linux/lib/dump_stack.c:88 dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106 print_address_description linux/mm/kasan/report.c:377 print_report+0xc4/0x620 linux/mm/kasan/report.c:488 kasan_report+0xda/0x110 linux/mm/kasan/report.c:601 kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026 skb_release_all linux/net/core/skbuff.c:1094 __kfree_skb linux/net/core/skbuff.c:1108 kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144 kfree_skb linux/./include/linux/skbuff.h:1244 tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186 tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324 tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824 tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159 tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390 udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346 __udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422 ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254 dst_input linux/./include/net/dst.h:461 ip_rcv_finish linux/net/ipv4/ip_input.c:449 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534 __netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648 process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976 __napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576 napi_poll linux/net/core/dev.c:6645 net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781 __do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553 do_softirq linux/kernel/softirq.c:454 do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441 </IRQ> <TASK> __local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381 local_bh_enable linux/./include/linux/bottom_half.h:33 rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851 __dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378 dev_queue_xmit linux/./include/linux/netdevice.h:3169 neigh_hh_output linux/./include/net/neighbour.h:526 neigh_output linux/./include/net/neighbour.h:540 ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235 __ip_finish_output linux/net/ipv4/ip_output.c:313 __ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323 NF_HOOK_COND linux/./include/linux/netfilter.h:303 ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433 dst_output linux/./include/net/dst.h:451 ip_local_out linux/net/ipv4/ip_output.c:129 ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492 udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963 udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250 inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850 sock_sendmsg_nosec linux/net/socket.c:730 __sock_sendmsg linux/net/socket.c:745 __sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191 __do_sys_sendto linux/net/socket.c:2203 __se_sys_sendto linux/net/socket.c:2199 __x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199 do_syscall_x64 linux/arch/x86/entry/common.c:52 do_syscall_64+0xd8/0x270 linux/arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77 linux/arch/x86/entry/entry_64.S:120 RIP: 0033:0x7f3434974f29 Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 37 8f 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007fff9154f2b8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3434974f29 RDX: 00000000000032c8 RSI: 00007fff9154f300 RDI: 0000000000000003 RBP: 00007fff915532e0 R08: 00007fff91553360 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000212 R12: 000055ed86d261d0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> In the critical scenario, either the relevant skb is freed or its ownership is transferred into a frag_lists. In both cases, the cleanup code must not free it again: we need to clear the skb reference earlier. Fixes: 1149557 ("tipc: eliminate unnecessary linearization of incoming buffers") Cc: [email protected] Reported-by: [email protected] # ZDI-CAN-23852 Acked-by: Xin Long <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit 080cbb8) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2023-52463 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Ilias Apalodimas <[email protected]> commit 0e8d244 Empty-Commit: Cherry-Pick Conflicts during history rebuild. Will be included in final tarball splat. Ref for failed cherry-pick at: ciq/ciq_backports/kernel-4.18.0-553.16.1.el8_10/0e8d2444.failed If SetVariable at runtime is not supported by the firmware we never assign a callback for that function. At the same time mount the efivarfs as RO so no one can call that. However, we never check the permission flags when someone remounts the filesystem as RW. As a result this leads to a crash looking like this: $ mount -o remount,rw /sys/firmware/efi/efivars $ efi-updatevar -f PK.auth PK [ 303.279166] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 303.280482] Mem abort info: [ 303.280854] ESR = 0x0000000086000004 [ 303.281338] EC = 0x21: IABT (current EL), IL = 32 bits [ 303.282016] SET = 0, FnV = 0 [ 303.282414] EA = 0, S1PTW = 0 [ 303.282821] FSC = 0x04: level 0 translation fault [ 303.283771] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004258c000 [ 303.284913] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 303.286076] Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP [ 303.286936] Modules linked in: qrtr tpm_tis tpm_tis_core crct10dif_ce arm_smccc_trng rng_core drm fuse ip_tables x_tables ipv6 [ 303.288586] CPU: 1 PID: 755 Comm: efi-updatevar Not tainted 6.3.0-rc1-00108-gc7d0c4695c68 #1 [ 303.289748] Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.04-00627-g88336918701d 04/01/2023 [ 303.291150] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 303.292123] pc : 0x0 [ 303.292443] lr : efivar_set_variable_locked+0x74/0xec [ 303.293156] sp : ffff800008673c10 [ 303.293619] x29: ffff800008673c10 x28: ffff0000037e8000 x27: 0000000000000000 [ 303.294592] x26: 0000000000000800 x25: ffff000002467400 x24: 0000000000000027 [ 303.295572] x23: ffffd49ea9832000 x22: ffff0000020c9800 x21: ffff000002467000 [ 303.296566] x20: 0000000000000001 x19: 00000000000007fc x18: 0000000000000000 [ 303.297531] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaac807ab54 [ 303.298495] x14: ed37489f673633c0 x13: 71c45c606de13f80 x12: 47464259e219acf4 [ 303.299453] x11: ffff000002af7b01 x10: 0000000000000003 x9 : 0000000000000002 [ 303.300431] x8 : 0000000000000010 x7 : ffffd49ea8973230 x6 : 0000000000a85201 [ 303.301412] x5 : 0000000000000000 x4 : ffff0000020c9800 x3 : 00000000000007fc [ 303.302370] x2 : 0000000000000027 x1 : ffff000002467400 x0 : ffff000002467000 [ 303.303341] Call trace: [ 303.303679] 0x0 [ 303.303938] efivar_entry_set_get_size+0x98/0x16c [ 303.304585] efivarfs_file_write+0xd0/0x1a4 [ 303.305148] vfs_write+0xc4/0x2e4 [ 303.305601] ksys_write+0x70/0x104 [ 303.306073] __arm64_sys_write+0x1c/0x28 [ 303.306622] invoke_syscall+0x48/0x114 [ 303.307156] el0_svc_common.constprop.0+0x44/0xec [ 303.307803] do_el0_svc+0x38/0x98 [ 303.308268] el0_svc+0x2c/0x84 [ 303.308702] el0t_64_sync_handler+0xf4/0x120 [ 303.309293] el0t_64_sync+0x190/0x194 [ 303.309794] Code: ???????? ???????? ???????? ???????? (????????) [ 303.310612] ---[ end trace 0000000000000000 ]--- Fix this by adding a .reconfigure() function to the fs operations which we can use to check the requested flags and deny anything that's not RO if the firmware doesn't implement SetVariable at runtime. Fixes: f88814c ("efi/efivars: Expose RT service availability via efivars abstraction") Signed-off-by: Ilias Apalodimas <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> (cherry picked from commit 0e8d244) Signed-off-by: Jonathan Maple <[email protected]> # Conflicts: # fs/efivarfs/super.c

jira LE-1907 cve CVE-2024-35938 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Baochen Qiang <[email protected]> commit 1cca1bd Currently buf_len field of ath11k_mhi_config_qca6390 is assigned with 0, making MHI use a default size, 64KB, to allocate channel buffers. This is likely to fail in some scenarios where system memory is highly fragmented and memory compaction or reclaim is not allowed. There is a fail report which is caused by it: kworker/u32:45: page allocation failure: order:4, mode:0x40c00(GFP_NOIO|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 0 PID: 19318 Comm: kworker/u32:45 Not tainted 6.8.0-rc3-1.gae4495f-default #1 openSUSE Tumbleweed (unreleased) 493b6d5b382c603654d7a81fc3c144d59a1dfceb Workqueue: events_unbound async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x47/0x60 warn_alloc+0x13a/0x1b0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __alloc_pages_direct_compact+0xab/0x210 __alloc_pages_slowpath.constprop.0+0xd3e/0xda0 __alloc_pages+0x32d/0x350 ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] __kmalloc_large_node+0x72/0x110 __kmalloc+0x37c/0x480 ? mhi_map_single_no_bb+0x77/0xf0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] ? mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] mhi_prepare_channel+0x127/0x2d0 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] __mhi_prepare_for_transfer+0x44/0x80 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] ? __pfx_____mhi_prepare_for_transfer+0x10/0x10 [mhi 40df44e07c05479f7a6e7b90fba9f0e0031a7814] device_for_each_child+0x5c/0xa0 ? __pfx_pci_pm_resume+0x10/0x10 ath11k_core_resume+0x65/0x100 [ath11k a5094e22d7223135c40d93c8f5321cf09fd85e4e] ? srso_alias_return_thunk+0x5/0xfbef5 ath11k_pci_pm_resume+0x32/0x60 [ath11k_pci 830b7bfc3ea80ebef32e563cafe2cb55e9cc73ec] ? srso_alias_return_thunk+0x5/0xfbef5 dpm_run_callback+0x8c/0x1e0 device_resume+0x104/0x340 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x32/0x120 process_one_work+0x168/0x330 worker_thread+0x2f5/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe8/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Actually those buffers are used only by QMI target -> host communication. And for WCN6855 and QCA6390, the largest packet size for that is less than 6KB. So change buf_len field to 8KB, which results in order 1 allocation if page size is 4KB. In this way, we can at least save some memory, and as well as decrease the possibility of allocation failure in those scenarios. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Reported-by: Vlastimil Babka <[email protected]> Closes: https://lore.kernel.org/ath11k/[email protected]/ Signed-off-by: Baochen Qiang <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected] (cherry picked from commit 1cca1bd) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2024-36904 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Kuniyuki Iwashima <[email protected]> commit f2db723 Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique() with nice analysis. Since commit ec94c26 ("tcp/dccp: avoid one atomic operation for timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's sk_refcnt after putting it into ehash and releasing the bucket lock. Thus, there is a small race window where other threads could try to reuse the port during connect() and call sock_hold() in tcp_twsk_unique() for the TIME-WAIT socket with zero refcnt. If that happens, the refcnt taken by tcp_twsk_unique() is overwritten and sock_put() will cause underflow, triggering a real use-after-free somewhere else. To avoid the use-after-free, we need to use refcount_inc_not_zero() in tcp_twsk_unique() and give up on reusing the port if it returns false. [0]: refcount_t: addition on 0; use-after-free. WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110 CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1 Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023 RIP: 0010:refcount_warn_saturate+0xe5/0x110 Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8 RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027 RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0 RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0 R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84 R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0 FS: 00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> ? refcount_warn_saturate+0xe5/0x110 ? __warn+0x81/0x130 ? refcount_warn_saturate+0xe5/0x110 ? report_bug+0x171/0x1a0 ? refcount_warn_saturate+0xe5/0x110 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? refcount_warn_saturate+0xe5/0x110 tcp_twsk_unique+0x186/0x190 __inet_check_established+0x176/0x2d0 __inet_hash_connect+0x74/0x7d0 ? __pfx___inet_check_established+0x10/0x10 tcp_v4_connect+0x278/0x530 __inet_stream_connect+0x10f/0x3d0 inet_stream_connect+0x3a/0x60 __sys_connect+0xa8/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x83/0x170 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7f62c11a885d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003 RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0 R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0 </TASK> Fixes: ec94c26 ("tcp/dccp: avoid one atomic operation for timewait hashdance") Reported-by: Anderson Nascimento <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit f2db723) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2024-26870 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Jorge Mora <[email protected]> commit 251a658 A call to listxattr() with a buffer size = 0 returns the actual size of the buffer needed for a subsequent call. When size > 0, nfs4_listxattr() does not return an error because either generic_listxattr() or nfs4_listxattr_nfs4_label() consumes exactly all the bytes then size is 0 when calling nfs4_listxattr_nfs4_user() which then triggers the following kernel BUG: [ 99.403778] kernel BUG at mm/usercopy.c:102! [ 99.404063] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 99.408463] CPU: 0 PID: 3310 Comm: python3 Not tainted 6.6.0-61.fc40.aarch64 #1 [ 99.415827] Call trace: [ 99.415985] usercopy_abort+0x70/0xa0 [ 99.416227] __check_heap_object+0x134/0x158 [ 99.416505] check_heap_object+0x150/0x188 [ 99.416696] __check_object_size.part.0+0x78/0x168 [ 99.416886] __check_object_size+0x28/0x40 [ 99.417078] listxattr+0x8c/0x120 [ 99.417252] path_listxattr+0x78/0xe0 [ 99.417476] __arm64_sys_listxattr+0x28/0x40 [ 99.417723] invoke_syscall+0x78/0x100 [ 99.417929] el0_svc_common.constprop.0+0x48/0xf0 [ 99.418186] do_el0_svc+0x24/0x38 [ 99.418376] el0_svc+0x3c/0x110 [ 99.418554] el0t_64_sync_handler+0x120/0x130 [ 99.418788] el0t_64_sync+0x194/0x198 [ 99.418994] Code: aa0003e3 d000a3e0 91310000 97f49bdb (d4210000) Issue is reproduced when generic_listxattr() returns 'system.nfs4_acl', thus calling lisxattr() with size = 16 will trigger the bug. Add check on nfs4_listxattr() to return ERANGE error when it is called with size > 0 and the return value is greater than size. Fixes: 012a211 ("NFSv4.2: hook in the user extended attribute handlers") Signed-off-by: Jorge Mora <[email protected]> Reviewed-by: Benjamin Coddington <[email protected]> Signed-off-by: Trond Myklebust <[email protected]> (cherry picked from commit 251a658) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Edward Adam Davis <[email protected]> commit 71733b4 [Syz report] kernel BUG at fs/gfs2/quota.c:1508! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 5060 Comm: syz-executor505 Not tainted 6.7.0-rc3-syzkaller-00134-g994d5c58e50e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:gfs2_quota_cleanup+0x6b5/0x6c0 fs/gfs2/quota.c:1508 Code: fe e9 cf fd ff ff 44 89 e9 80 e1 07 80 c1 03 38 c1 0f 8c 2d fe ff ff 4c 89 ef e8 b6 19 23 fe e9 20 fe ff ff e8 ec 11 c7 fd 90 <0f> 0b e8 84 9c 4f 07 0f 1f 40 00 66 0f 1f 00 55 41 57 41 56 41 54 RSP: 0018:ffffc9000409f9e0 EFLAGS: 00010293 RAX: ffffffff83c76854 RBX: 0000000000000002 RCX: ffff888026001dc0 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffc9000409fb00 R08: ffffffff83c762b0 R09: 1ffff1100fd38015 R10: dffffc0000000000 R11: ffffed100fd38016 R12: dffffc0000000000 R13: ffff88807e9c0828 R14: ffff888014693580 R15: ffff88807e9c0000 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f16d1bd70f8 CR3: 0000000027199000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> gfs2_put_super+0x2e1/0x940 fs/gfs2/super.c:611 generic_shutdown_super+0x13a/0x2c0 fs/super.c:696 kill_block_super+0x44/0x90 fs/super.c:1667 deactivate_locked_super+0xc1/0x130 fs/super.c:484 cleanup_mnt+0x426/0x4c0 fs/namespace.c:1256 task_work_run+0x24a/0x300 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xa34/0x2750 kernel/exit.c:871 do_group_exit+0x206/0x2c0 kernel/exit.c:1021 __do_sys_exit_group kernel/exit.c:1032 [inline] __se_sys_exit_group kernel/exit.c:1030 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1030 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b ... [pid 5060] fsconfig(4, FSCONFIG_CMD_RECONFIGURE, NULL, NULL, 0) = 0 [pid 5060] exit_group(1) = ? ... [Analysis] When the task exits, it will execute cleanup_mnt() to recycle the mounted gfs2 file system, but it performs a system call fsconfig(4, FSCONFIG_CMD_RECONFIGURE, NULL, NULL, 0) before executing the task exit operation. This will execute the following kernel path to complete the setting of SDF_JOURNAL_LIVE for sd_flags: SYSCALL_DEFINE5(fsconfig, ..)-> vfs_fsconfig_locked()-> vfs_cmd_reconfigure()-> gfs2_reconfigure()-> gfs2_make_fs_rw()-> set_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags); [Fix] Add SDF_NORECOVERY check in gfs2_quota_cleanup() to avoid checking SDF_JOURNAL_LIVE on the path where gfs2 is being unmounted. Reported-and-tested-by: [email protected] Fixes: f66af88 ("gfs2: Stop using gfs2_make_fs_ro for withdraw") Signed-off-by: Edward Adam Davis <[email protected]> Signed-off-by: Andreas Gruenbacher <[email protected]> (cherry picked from commit 71733b4) Signed-off-by: Jonathan Maple <[email protected]>

…mit_queues' jira LE-1907 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Yu Kuai <[email protected]> commit a2db328 Empty-Commit: Cherry-Pick Conflicts during history rebuild. Will be included in final tarball splat. Ref for failed cherry-pick at: ciq/ciq_backports/kernel-4.18.0-553.16.1.el8_10/a2db328b.failed Writing 'power' and 'submit_queues' concurrently will trigger kernel panic: Test script: modprobe null_blk nr_devices=0 mkdir -p /sys/kernel/config/nullb/nullb0 while true; do echo 1 > submit_queues; echo 4 > submit_queues; done & while true; do echo 1 > power; echo 0 > power; done Test result: BUG: kernel NULL pointer dereference, address: 0000000000000148 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:__lock_acquire+0x41d/0x28f0 Call Trace: <TASK> lock_acquire+0x121/0x450 down_write+0x5f/0x1d0 simple_recursive_removal+0x12f/0x5c0 blk_mq_debugfs_unregister_hctxs+0x7c/0x100 blk_mq_update_nr_hw_queues+0x4a3/0x720 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x79/0xf0 [null_blk] configfs_write_iter+0x119/0x1e0 vfs_write+0x326/0x730 ksys_write+0x74/0x150 This is because del_gendisk() can concurrent with blk_mq_update_nr_hw_queues(): nullb_device_power_store nullb_apply_submit_queues null_del_dev del_gendisk nullb_update_nr_hw_queues if (!dev->nullb) // still set while gendisk is deleted return 0 blk_mq_update_nr_hw_queues dev->nullb = NULL Fix this problem by resuing the global mutex to protect nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs. Fixes: 45919fb ("null_blk: Enable modifying 'submit_queues' after an instance has been configured") Reported-and-tested-by: Yi Zhang <[email protected]> Closes: https://lore.kernel.org/all/CAHj4cs9LgsHLnjg8z06LQ3Pr5cax-+Ps+xT7AP7TPnEjStuwZA@mail.gmail.com/ Signed-off-by: Yu Kuai <[email protected]> Reviewed-by: Zhu Yanjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> (cherry picked from commit a2db328) Signed-off-by: Jonathan Maple <[email protected]> # Conflicts: # drivers/block/null_blk_main.c

jira LE-1907 cve CVE-2024-36905 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Eric Dumazet <[email protected]> commit 9406279 TCP_SYN_RECV state is really special, it is only used by cross-syn connections, mostly used by fuzzers. In the following crash [1], syzbot managed to trigger a divide by zero in tcp_rcv_space_adjust() A socket makes the following state transitions, without ever calling tcp_init_transfer(), meaning tcp_init_buffer_space() is also not called. TCP_CLOSE connect() TCP_SYN_SENT TCP_SYN_RECV shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN) TCP_FIN_WAIT1 To fix this issue, change tcp_shutdown() to not perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition, which makes no sense anyway. When tcp_rcv_state_process() later changes socket state from TCP_SYN_RECV to TCP_ESTABLISH, then look at sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state, and send a FIN packet from a sane socket state. This means tcp_send_fin() can now be called from BH context, and must use GFP_ATOMIC allocations. [1] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767 Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48 RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246 RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7 R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30 R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da FS: 00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0 Call Trace: <TASK> tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513 tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578 inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7faeb6363db9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001 Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Neal Cardwell <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit 9406279) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Dong Chenchen <[email protected]> commit c83b493 As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. Fixes: c411ed8 ("nsh: add GSO support") Reported-by: [email protected] Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Dong Chenchen <[email protected]> Signed-off-by: David S. Miller <[email protected]> (cherry picked from commit c83b493) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2023-52784 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Eric Dumazet <[email protected]> commit 3cffa2d Commit 9eed321 ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec2 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 94785b8b (d4210000) Fixes: 872254d ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit 3cffa2d) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2023-52796 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Eric Dumazet <[email protected]> commit 18f0394 Empty-Commit: Cherry-Pick Conflicts during history rebuild. Will be included in final tarball splat. Ref for failed cherry-pick at: ciq/ciq_backports/kernel-4.18.0-553.16.1.el8_10/18f03942.failed Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<ffffffff855ce4cd>] neigh_output include/net/neighbour.h:543 [inline] [<ffffffff855ce4cd>] ip6_finish_output2+0x160d/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff8575d27f>] dst_output include/net/dst.h:444 [inline] [<ffffffff8575d27f>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff838bdae4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff838bdae4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bdae4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bdae4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff84d4a65e>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff84d4a65e>] neigh_resolve_output+0x64e/0x750 net/core/neighbour.c:1560 [<ffffffff855ce503>] neigh_output include/net/neighbour.h:545 [inline] [<ffffffff855ce503>] ip6_finish_output2+0x1643/0x1ae0 net/ipv6/ip6_output.c:139 [<ffffffff855b8616>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff855b8616>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff855b7e3c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff855b7e3c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff855b9ce4>] dst_output include/net/dst.h:444 [inline] [<ffffffff855b9ce4>] NF_HOOK include/linux/netfilter.h:309 [inline] [<ffffffff855b9ce4>] ip6_xmit+0x11a4/0x1b20 net/ipv6/ip6_output.c:352 [<ffffffff8597984e>] sctp_v6_xmit+0x9ae/0x1230 net/sctp/ipv6.c:250 [<ffffffff8594623e>] sctp_packet_transmit+0x25de/0x2bc0 net/sctp/output.c:653 [<ffffffff858f5142>] sctp_packet_singleton+0x202/0x310 net/sctp/outqueue.c:783 [<ffffffff858ea411>] sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] [<ffffffff858ea411>] sctp_outq_flush+0x661/0x3d40 net/sctp/outqueue.c:1212 [<ffffffff858f02f9>] sctp_outq_uncork+0x79/0xb0 net/sctp/outqueue.c:764 [<ffffffff8589f060>] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] [<ffffffff8589f060>] sctp_do_sm+0x55c0/0x5c30 net/sctp/sm_sideeffect.c:1170 [<ffffffff85941567>] sctp_primitive_ASSOCIATE+0x97/0xc0 net/sctp/primitive.c:73 [<ffffffff859408b2>] sctp_sendmsg_to_asoc+0xf62/0x17b0 net/sctp/socket.c:1839 [<ffffffff85910b5e>] sctp_sendmsg+0x212e/0x33b0 net/sctp/socket.c:2029 [<ffffffff8544d559>] inet_sendmsg+0x149/0x310 net/ipv4/af_inet.c:849 [<ffffffff84c6c4d2>] sock_sendmsg_nosec net/socket.c:716 [inline] [<ffffffff84c6c4d2>] sock_sendmsg net/socket.c:736 [inline] [<ffffffff84c6c4d2>] ____sys_sendmsg+0x572/0x8c0 net/socket.c:2504 [<ffffffff84c6ca91>] ___sys_sendmsg net/socket.c:2558 [inline] [<ffffffff84c6ca91>] __sys_sendmsg+0x271/0x360 net/socket.c:2587 [<ffffffff84c6cbff>] __do_sys_sendmsg net/socket.c:2596 [inline] [<ffffffff84c6cbff>] __se_sys_sendmsg net/socket.c:2594 [inline] [<ffffffff84c6cbff>] __x64_sys_sendmsg+0x7f/0x90 net/socket.c:2594 [<ffffffff85b32553>] do_syscall_x64 arch/x86/entry/common.c:51 [inline] [<ffffffff85b32553>] do_syscall_64+0x53/0x80 arch/x86/entry/common.c:84 [<ffffffff85c00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 2ad7bf3 ("ipvlan: Initial check-in of the IPVLAN driver.") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Mahesh Bandewar <[email protected]> Cc: Willem de Bruijn <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]> (cherry picked from commit 18f0394) Signed-off-by: Jonathan Maple <[email protected]> # Conflicts: # drivers/net/ipvlan/ipvlan_core.c

jira LE-1907 cve CVE-2021-47408 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Eric Dumazet <[email protected]> commit e9edc18 Empty-Commit: Cherry-Pick Conflicts during history rebuild. Will be included in final tarball splat. Ref for failed cherry-pick at: ciq/ciq_backports/kernel-4.18.0-553.16.1.el8_10/e9edc188.failed Syzbot was able to trigger the following warning [1] No repro found by syzbot yet but I was able to trigger similar issue by having 2 scripts running in parallel, changing conntrack hash sizes, and: for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done It would take more than 5 minutes for net_namespace structures to be cleaned up. This is because nf_ct_iterate_cleanup() has to restart everytime a resize happened. By adding a mutex, we can serialize hash resizes and cleanups and also make get_next_corpse() faster by skipping over empty buckets. Even without resizes in the picture, this patch considerably speeds up network namespace dismantles. [1] INFO: task syz-executor.0:8312 can't die for more than 144 seconds. task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408 preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35 __local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390 local_bh_enable include/linux/bottom_half.h:32 [inline] get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline] nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275 nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171 setup_net+0x639/0xa30 net/core/net_namespace.c:349 copy_net_ns+0x319/0x760 net/core/net_namespace.c:470 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3128 __do_sys_unshare kernel/fork.c:3202 [inline] __se_sys_unshare kernel/fork.c:3200 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f63da68e739 RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000 RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80 R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000 Showing all locks held in the system: 1 lock held by khungtaskd/27: #0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446 2 locks held by kworker/u4:2/153: #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268 #1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272 1 lock held by systemd-udevd/2970: 1 lock held by in:imklog/6258: #0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990 3 locks held by kworker/1:6/8158: 1 lock held by syz-executor.0/8312: 2 locks held by kworker/u4:13/9320: 1 lock held by syz-executor.5/10178: 1 lock held by syz-executor.4/10217: Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> (cherry picked from commit e9edc18) Signed-off-by: Jonathan Maple <[email protected]> # Conflicts: # net/netfilter/nf_conntrack_core.c

…oy_rcu() jira LE-1907 cve CVE-2024-36286 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Eric Dumazet <[email protected]> commit dc21c6c syzbot reported that nf_reinject() could be called without rcu_read_lock() : WARNING: suspicious RCU usage 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Not tainted net/netfilter/nfnetlink_queue.c:263 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor.4/13427: #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2190 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_core+0xa86/0x1830 kernel/rcu/tree.c:2471 #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: nfqnl_flush net/netfilter/nfnetlink_queue.c:405 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: instance_destroy_rcu+0x30/0x220 net/netfilter/nfnetlink_queue.c:172 stack backtrace: CPU: 0 PID: 13427 Comm: syz-executor.4 Not tainted 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nf_reinject net/netfilter/nfnetlink_queue.c:323 [inline] nfqnl_reinject+0x6ec/0x1120 net/netfilter/nfnetlink_queue.c:397 nfqnl_flush net/netfilter/nfnetlink_queue.c:410 [inline] instance_destroy_rcu+0x1ae/0x220 net/netfilter/nfnetlink_queue.c:172 rcu_do_batch kernel/rcu/tree.c:2196 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2471 handle_softirqs+0x2d6/0x990 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> Fixes: 9872bec ("[NETFILTER]: nfnetlink: use RCU for queue instances hash") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> (cherry picked from commit dc21c6c) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2024-36270 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Florian Westphal <[email protected]> commit 21a673b syzbot reports: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] [..] RIP: 0010:nf_tproxy_laddr4+0xb7/0x340 net/ipv4/netfilter/nf_tproxy_ipv4.c:62 Call Trace: nft_tproxy_eval_v4 net/netfilter/nft_tproxy.c:56 [inline] nft_tproxy_eval+0xa9a/0x1a00 net/netfilter/nft_tproxy.c:168 __in_dev_get_rcu() can return NULL, so check for this. Reported-and-tested-by: [email protected] Fixes: cc6eb43 ("tproxy: use the interface primary IP address as a default value for --on-ip") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> (cherry picked from commit 21a673b) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2024-38598 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Yu Kuai <[email protected]> commit f0e729a Is is reported that for dm-raid10, lvextend + lvchange --syncaction will trigger following softlockup: kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976] CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1 RIP: 0010:_raw_spin_unlock_irq+0x13/0x30 Call Trace: <TASK> md_bitmap_start_sync+0x6b/0xf0 raid10_sync_request+0x25c/0x1b40 [raid10] md_do_sync+0x64b/0x1020 md_thread+0xa7/0x170 kthread+0xcf/0x100 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1a/0x30 And the detailed process is as follows: md_do_sync j = mddev->resync_min while (j < max_sectors) sectors = raid10_sync_request(mddev, j, &skipped) if (!md_bitmap_start_sync(..., &sync_blocks)) // md_bitmap_start_sync set sync_blocks to 0 return sync_blocks + sectors_skippe; // sectors = 0; j += sectors; // j never change Root cause is that commit 301867b ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter") return early from md_bitmap_get_counter(), without setting returned blocks. Fix this problem by always set returned blocks from md_bitmap_get_counter"(), as it used to be. Noted that this patch just fix the softlockup problem in kernel, the case that bitmap size doesn't match array size still need to be fixed. Fixes: 301867b ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter") Reported-and-tested-by: Nigel Croxon <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> (cherry picked from commit f0e729a) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Paulo Alcantara <[email protected]> commit 41f1008 Empty-Commit: Cherry-Pick Conflicts during history rebuild. Will be included in final tarball splat. Ref for failed cherry-pick at: ciq/ciq_backports/kernel-4.18.0-553.16.1.el8_10/41f10081.failed Either mount(2) or automount might not have server->origin_fullpath set yet while refresh_cache_worker() is attempting to refresh DFS referrals. Add missing NULL check and locking around it. This fixes bellow crash: [ 1070.276835] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 1070.277676] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 1070.278219] CPU: 1 PID: 8506 Comm: kworker/u8:1 Not tainted 5.18.0-rc3 #10 [ 1070.278701] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 1070.279495] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 1070.280044] RIP: 0010:strcasecmp+0x34/0x150 [ 1070.280359] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44 [ 1070.281729] RSP: 0018:ffffc90008367958 EFLAGS: 00010246 [ 1070.282114] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000 [ 1070.282691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 1070.283273] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27 [ 1070.283857] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000 [ 1070.284436] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000 [ 1070.284990] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000 [ 1070.285625] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1070.286100] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0 [ 1070.286683] Call Trace: [ 1070.286890] <TASK> [ 1070.287070] refresh_cache_worker+0x895/0xd20 [cifs] [ 1070.287475] ? __refresh_tcon.isra.0+0xfb0/0xfb0 [cifs] [ 1070.287905] ? __lock_acquire+0xcd1/0x6960 [ 1070.288247] ? is_dynamic_key+0x1a0/0x1a0 [ 1070.288591] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 1070.289012] ? lock_downgrade+0x6f0/0x6f0 [ 1070.289318] process_one_work+0x7bd/0x12d0 [ 1070.289637] ? worker_thread+0x160/0xec0 [ 1070.289970] ? pwq_dec_nr_in_flight+0x230/0x230 [ 1070.290318] ? _raw_spin_lock_irq+0x5e/0x90 [ 1070.290619] worker_thread+0x5ac/0xec0 [ 1070.290891] ? process_one_work+0x12d0/0x12d0 [ 1070.291199] kthread+0x2a5/0x350 [ 1070.291430] ? kthread_complete_and_exit+0x20/0x20 [ 1070.291770] ret_from_fork+0x22/0x30 [ 1070.292050] </TASK> [ 1070.292223] Modules linked in: bpfilter cifs cifs_arc4 cifs_md4 [ 1070.292765] ---[ end trace 0000000000000000 ]--- [ 1070.293108] RIP: 0010:strcasecmp+0x34/0x150 [ 1070.293471] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44 [ 1070.297718] RSP: 0018:ffffc90008367958 EFLAGS: 00010246 [ 1070.298622] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000 [ 1070.299428] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 1070.300296] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27 [ 1070.301204] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000 [ 1070.301932] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000 [ 1070.302645] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000 [ 1070.303462] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1070.304131] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0 [ 1070.305004] Kernel panic - not syncing: Fatal exception [ 1070.305711] Kernel Offset: disabled [ 1070.305971] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Cc: [email protected] Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]> (cherry picked from commit 41f1008) Signed-off-by: Jonathan Maple <[email protected]> # Conflicts: # fs/cifs/connect.c # fs/cifs/dfs_cache.c

jira LE-1907 cve CVE-2024-39487 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Sam Sun <[email protected]> commit e271ff5 In function bond_option_arp_ip_targets_set(), if newval->string is an empty string, newval->string+1 will point to the byte after the string, causing an out-of-bound read. BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418 Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107 CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc1/0x5e0 mm/kasan/report.c:475 kasan_report+0xbe/0xf0 mm/kasan/report.c:588 strlen+0x7d/0xa0 lib/string.c:418 __fortify_strlen include/linux/fortify-string.h:210 [inline] in4_pton+0xa3/0x3f0 net/core/utils.c:130 bond_option_arp_ip_targets_set+0xc2/0x910 drivers/net/bonding/bond_options.c:1201 __bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767 __bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792 bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817 bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156 dev_attr_store+0x54/0x80 drivers/base/core.c:2366 sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x96a/0xd80 fs/read_write.c:584 ksys_write+0x122/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace ]--- Fix it by adding a check of string length before using it. Fixes: f9de11a ("bonding: add ip checks when store ip target") Signed-off-by: Yue Sun <[email protected]> Signed-off-by: Simon Horman <[email protected]> Acked-by: Jay Vosburgh <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit e271ff5) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2023-52648 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Zack Rusin <[email protected]> commit 27571c6 Switch to a new plane state requires unreferencing of all held surfaces. In the work required for mob cursors the mapped surfaces started being cached but the variable indicating whether the surface is currently mapped was not being reset. This leads to crashes as the duplicated state, incorrectly, indicates the that surface is mapped even when no surface is present. That's because after unreferencing the surface it's perfectly possible for the plane to be backed by a bo instead of a surface. Reset the surface mapped flag when unreferencing the plane state surface to fix null derefs in cleanup. Fixes crashes in KDE KWin 6.0 on Wayland: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2533 Comm: kwin_wayland Not tainted 6.7.0-rc3-vmwgfx #2 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920 R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00 FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] drm_atomic_helper_cleanup_planes+0x9b/0xc0 commit_tail+0xd1/0x130 drm_atomic_helper_commit+0x11a/0x140 drm_atomic_commit+0x97/0xd0 ? __pfx___drm_printfn_info+0x10/0x10 drm_atomic_helper_update_plane+0xf5/0x160 drm_mode_cursor_universal+0x10e/0x270 drm_mode_cursor_common+0x102/0x230 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 drm_ioctl_kernel+0xb2/0x110 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_cursor2_ioctl+0x10/0x10 ? __pfx_drm_ioctl+0x10/0x10 vmw_generic_ioctl+0xa4/0x110 [vmwgfx] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x61/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? __x64_sys_ioctl+0xaf/0xd0 ? syscall_exit_to_user_mode+0x2b/0x40 ? do_syscall_64+0x70/0xe0 ? exc_page_fault+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f1e93f279ed Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff f> RSP: 002b:00007ffca0faf600 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055db876ed2c0 RCX: 00007f1e93f279ed RDX: 00007ffca0faf6c0 RSI: 00000000c02464bb RDI: 0000000000000015 RBP: 00007ffca0faf650 R08: 000055db87184010 R09: 0000000000000007 R10: 000055db886471a0 R11: 0000000000000246 R12: 00007ffca0faf6c0 R13: 00000000c02464bb R14: 0000000000000015 R15: 00007ffca0faf790 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_ine> CR2: 0000000000000028 ---[ end trace 0000000000000000 ]--- RIP: 0010:vmw_du_cursor_plane_cleanup_fb+0x124/0x140 [vmwgfx] Code: 00 00 00 75 3a 48 83 c4 10 5b 5d c3 cc cc cc cc 48 8b b3 a8 00 00 00 48 c7 c7 99 90 43 c0 e8 93 c5 db ca 48 8b 83 a8 00 00 00 <48> 8b 78 28 e8 e3 f> RSP: 0018:ffffb6b98216fa80 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff969d84cdcb00 RCX: 0000000000000027 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff969e75f21600 RBP: ffff969d4143dc50 R08: 0000000000000000 R09: ffffb6b98216f920 R10: 0000000000000003 R11: ffff969e7feb3b10 R12: 0000000000000000 R13: 0000000000000000 R14: 000000000000027b R15: ffff969d49c9fc00 FS: 00007f1e8f1b4180(0000) GS:ffff969e75f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000104006004 CR4: 00000000003706f0 Signed-off-by: Zack Rusin <[email protected]> Fixes: 485d98d ("drm/vmwgfx: Add support for CursorMob and CursorBypass 4") Reported-by: Stefan Hoffmeister <[email protected]> Closes: https://gitlab.freedesktop.org/drm/misc/-/issues/34 Cc: Martin Krastev <[email protected]> Cc: Maaz Mombasawala <[email protected]> Cc: Ian Forbes <[email protected]> Cc: Broadcom internal kernel review list <[email protected]> Cc: [email protected] Cc: <[email protected]> # v5.19+ Acked-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maaz Mombasawala <[email protected]> Reviewed-by: Martin Krastev <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 27571c6) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 cve CVE-2024-26940 Rebuild_History Non-Buildable kernel-4.18.0-553.16.1.el8_10 commit-author Jocelyn Falempe <[email protected]> commit 4be9075 The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b Signed-off-by: Jocelyn Falempe <[email protected]> Fixes: af4a25b ("drm/vmwgfx: Add debugfs entries for various ttm resource managers") Cc: <[email protected]> Reviewed-by: Zack Rusin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4be9075) Signed-off-by: Jonathan Maple <[email protected]>

The conversion from compiler assisted indexing to manual indexing wasn't done correctly. The array is still made up of __le16 elements so multiplying the outer index by the element size is not what we want. Fix it up. This causes the kernel to oops when trying to transfer any significant amount of data over wifi: BUG: unable to handle page fault for address: ffffc900009f5282 PGD 100000067 P4D 100000067 PUD 1000fb067 PMD 102e82067 PTE 0 Oops: Oops: 0002 [#1] SMP CPU: 1 UID: 0 PID: 99 Comm: kworker/u8:3 Not tainted 6.15.0-rc2-cl-bisect3-00604-g6204d5130a64-dirty #78 PREEMPT Hardware name: Dell Inc. Latitude E5400 /0D695C, BIOS A19 06/13/2013 Workqueue: events_unbound cfg80211_wiphy_work [cfg80211] RIP: 0010:iwl_trans_pcie_tx+0x4dd/0xe60 [iwlwifi] Code: 00 00 66 81 fa ff 0f 0f 87 42 09 00 00 3d ff 00 00 00 0f 8f 37 09 00 00 41 c1 e0 0c 41 09 d0 48 8d 14 b6 48 c1 e2 07 48 01 ca <66> 44 89 04 57 48 8d 0c 12 83 f8 3f 0f 8e 84 01 00 00 41 8b 85 80 RSP: 0018:ffffc900001c3b50 EFLAGS: 00010206 RAX: 00000000000000c1 RBX: ffff88810b180028 RCX: 00000000000000c1 RDX: 0000000000002141 RSI: 000000000000000d RDI: ffffc900009f1000 RBP: 0000000000000002 R08: 0000000000000025 R09: ffffffffa050fa60 R10: 00000000fbdbf4bc R11: 0000000000000082 R12: ffff88810e5ade40 R13: ffff88810af81588 R14: 000000000000001a R15: ffff888100dfe0c8 FS: 0000000000000000(0000) GS:ffff8881998c3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900009f5282 CR3: 0000000001e39000 CR4: 00000000000426f0 Call Trace: <TASK> ? rcu_is_watching+0xd/0x40 ? __iwl_dbg+0xb1/0xe0 [iwlwifi] iwlagn_tx_skb+0x8e2/0xcb0 [iwldvm] iwlagn_mac_tx+0x18/0x30 [iwldvm] ieee80211_handle_wake_tx_queue+0x6c/0xc0 [mac80211] ieee80211_agg_start_txq+0x140/0x2e0 [mac80211] ieee80211_agg_tx_operational+0x126/0x210 [mac80211] ieee80211_process_addba_resp+0x27b/0x2a0 [mac80211] ieee80211_iface_work+0x4bd/0x4d0 [mac80211] ? _raw_spin_unlock_irq+0x1f/0x40 cfg80211_wiphy_work+0x117/0x1f0 [cfg80211] process_one_work+0x1ee/0x570 worker_thread+0x1c5/0x3b0 ? bh_worker+0x240/0x240 kthread+0x110/0x220 ? kthread_queue_delayed_work+0x90/0x90 ret_from_fork+0x28/0x40 ? kthread_queue_delayed_work+0x90/0x90 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: ctr aes_generic ccm sch_fq_codel bnep xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables btusb btrtl btintel btbcm bluetooth ecdh_generic ecc libaes hid_generic usbhid hid binfmt_misc joydev mousedev snd_hda_codec_hdmi iwldvm snd_hda_codec_idt snd_hda_codec_generic mac80211 coretemp iTCO_wdt watchdog kvm_intel i2c_dev snd_hda_intel libarc4 kvm snd_intel_dspcfg sdhci_pci sdhci_uhs2 snd_hda_codec iwlwifi sdhci irqbypass cqhci snd_hwdep snd_hda_core cfg80211 firewire_ohci mmc_core psmouse snd_pcm i2c_i801 firewire_core pcspkr led_class uhci_hcd i2c_smbus tg3 crc_itu_t iosf_mbi snd_timer rfkill libphy ehci_pci snd ehci_hcd lpc_ich mfd_core usbcore video intel_agp usb_common soundcore intel_gtt evdev agpgart parport_pc wmi parport backlight CR2: ffffc900009f5282 ---[ end trace 0000000000000000 ]--- RIP: 0010:iwl_trans_pcie_tx+0x4dd/0xe60 [iwlwifi] Code: 00 00 66 81 fa ff 0f 0f 87 42 09 00 00 3d ff 00 00 00 0f 8f 37 09 00 00 41 c1 e0 0c 41 09 d0 48 8d 14 b6 48 c1 e2 07 48 01 ca <66> 44 89 04 57 48 8d 0c 12 83 f8 3f 0f 8e 84 01 00 00 41 8b 85 80 RSP: 0018:ffffc900001c3b50 EFLAGS: 00010206 RAX: 00000000000000c1 RBX: ffff88810b180028 RCX: 00000000000000c1 RDX: 0000000000002141 RSI: 000000000000000d RDI: ffffc900009f1000 RBP: 0000000000000002 R08: 0000000000000025 R09: ffffffffa050fa60 R10: 00000000fbdbf4bc R11: 0000000000000082 R12: ffff88810e5ade40 R13: ffff88810af81588 R14: 000000000000001a R15: ffff888100dfe0c8 FS: 0000000000000000(0000) GS:ffff8881998c3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900009f5282 CR3: 0000000001e39000 CR4: 00000000000426f0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Cc: Miri Korenblit <[email protected]> Fixes: 6204d51 ("wifi: iwlwifi: use bc entries instead of bc table also for pre-ax210") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Miri Korenblit <[email protected]>

When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_enter+0x29/0x40 [ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170 [ 549.186613] [ C16] do_idle+0x7a/0xc0 [ 549.186616] [ C16] cpu_startup_entry+0x25/0x30 [ 549.186618] [ C16] start_secondary+0x117/0x140 [ 549.186623] [ C16] common_startup_64+0x13e/0x148 [ 549.186628] [ C16] </TASK> Fixes: 3c47e8a ("net: libwx: Support to receive packets in NAPI") Cc: [email protected] Signed-off-by: Jiawen Wu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

… runtime Assuming the "rx-vlan-filter" feature is enabled on a net device, the 8021q module will automatically add or remove VLAN 0 when the net device is put administratively up or down, respectively. There are a couple of problems with the above scheme. The first problem is a memory leak that can happen if the "rx-vlan-filter" feature is disabled while the device is running: # ip link add bond1 up type bond mode 0 # ethtool -K bond1 rx-vlan-filter off # ip link del dev bond1 When the device is put administratively down the "rx-vlan-filter" feature is disabled, so the 8021q module will not remove VLAN 0 and the memory will be leaked [1]. Another problem that can happen is that the kernel can automatically delete VLAN 0 when the device is put administratively down despite not adding it when the device was put administratively up since during that time the "rx-vlan-filter" feature was disabled. null-ptr-unref or bug_on[2] will be triggered by unregister_vlan_dev() for refcount imbalance if toggling filtering during runtime: $ ip link add bond0 type bond mode 0 $ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q $ ethtool -K bond0 rx-vlan-filter off $ ifconfig bond0 up $ ethtool -K bond0 rx-vlan-filter on $ ifconfig bond0 down $ ip link del vlan0 Root cause is as below: step1: add vlan0 for real_dev, such as bond, team. register_vlan_dev vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1 step2: disable vlan filter feature and enable real_dev step3: change filter from 0 to 1 vlan_device_event vlan_filter_push_vids ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0 step4: real_dev down vlan_device_event vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0 vlan_info_rcu_free //free vlan0 step5: delete vlan0 unregister_vlan_dev BUG_ON(!vlan_info); //vlan_info is null Fix both problems by noting in the VLAN info whether VLAN 0 was automatically added upon NETDEV_UP and based on that decide whether it should be deleted upon NETDEV_DOWN, regardless of the state of the "rx-vlan-filter" feature. [1] unreferenced object 0xffff8880068e3100 (size 256): comm "ip", pid 384, jiffies 4296130254 hex dump (first 32 bytes): 00 20 30 0d 80 88 ff ff 00 00 00 00 00 00 00 00 . 0............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 81ce31fa): __kmalloc_cache_noprof+0x2b5/0x340 vlan_vid_add+0x434/0x940 vlan_device_event.cold+0x75/0xa8 notifier_call_chain+0xca/0x150 __dev_notify_flags+0xe3/0x250 rtnl_configure_link+0x193/0x260 rtnl_newlink_create+0x383/0x8e0 __rtnl_newlink+0x22c/0xa40 rtnl_newlink+0x627/0xb00 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 [2] kernel BUG at net/8021q/vlan.c:99! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 382 Comm: ip Not tainted 6.16.0-rc3 #61 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_vlan_dev (net/8021q/vlan.c:99 (discriminator 1)) RSP: 0018:ffff88810badf310 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810da84000 RCX: ffffffffb47ceb9a RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88810e8b43c8 RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6cefe80 R10: ffffffffb677f407 R11: ffff88810badf3c0 R12: ffff88810e8b4000 R13: 0000000000000000 R14: ffff88810642a5c0 R15: 000000000000017e FS: 00007f1ff68c20c0(0000) GS:ffff888163a24000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ff5dad240 CR3: 0000000107e56000 CR4: 00000000000006f0 Call Trace: <TASK> rtnl_dellink (net/core/rtnetlink.c:3511 net/core/rtnetlink.c:3553) rtnetlink_rcv_msg (net/core/rtnetlink.c:6945) netlink_rcv_skb (net/netlink/af_netlink.c:2535) netlink_unicast (net/netlink/af_netlink.c:1314 net/netlink/af_netlink.c:1339) netlink_sendmsg (net/netlink/af_netlink.c:1883) ____sys_sendmsg (net/socket.c:712 net/socket.c:727 net/socket.c:2566) ___sys_sendmsg (net/socket.c:2622) __sys_sendmsg (net/socket.c:2652) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) Fixes: ad1afb0 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=a8b046e462915c65b10b Suggested-by: Ido Schimmel <[email protected]> Signed-off-by: Dong Chenchen <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…void Priority Inversion in SRIOV commit dc0297f upstream. RLCG Register Access is a way for virtual functions to safely access GPU registers in a virtualized environment., including TLB flushes and register reads. When multiple threads or VFs try to access the same registers simultaneously, it can lead to race conditions. By using the RLCG interface, the driver can serialize access to the registers. This means that only one thread can access the registers at a time, preventing conflicts and ensuring that operations are performed correctly. Additionally, when a low-priority task holds a mutex that a high-priority task needs, ie., If a thread holding a spinlock tries to acquire a mutex, it can lead to priority inversion. register access in amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical. The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being called, which attempts to acquire the mutex. This function is invoked from amdgpu_sriov_wreg, which in turn is called from gmc_v11_0_flush_gpu_tlb. The [ BUG: Invalid wait context ] indicates that a thread is trying to acquire a mutex while it is in a context that does not allow it to sleep (like holding a spinlock). Fixes the below: [ 253.013423] ============================= [ 253.013434] [ BUG: Invalid wait context ] [ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE [ 253.013464] ----------------------------- [ 253.013475] kworker/0:1/10 is trying to lock: [ 253.013487] ffff9f30542e3cf8 (&adev->virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.013815] other info that might help us debug this: [ 253.013827] context-{4:4} [ 253.013835] 3 locks held by kworker/0:1/10: [ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680 [ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680 [ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu] [ 253.014154] stack backtrace: [ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14 [ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024 [ 253.014224] Workqueue: events work_for_cpu_fn [ 253.014241] Call Trace: [ 253.014250] <TASK> [ 253.014260] dump_stack_lvl+0x9b/0xf0 [ 253.014275] dump_stack+0x10/0x20 [ 253.014287] __lock_acquire+0xa47/0x2810 [ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.014321] lock_acquire+0xd1/0x300 [ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.014562] ? __lock_acquire+0xa6b/0x2810 [ 253.014578] __mutex_lock+0x85/0xe20 [ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.014782] ? sched_clock_noinstr+0x9/0x10 [ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.014808] ? local_clock_noinstr+0xe/0xc0 [ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.015029] mutex_lock_nested+0x1b/0x30 [ 253.015044] ? mutex_lock_nested+0x1b/0x30 [ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu] [ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu] [ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu] [ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu] [ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu] [ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5 [ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu] [ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu] [ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu] [ 253.017057] amdgpu_pci_probe+0x1c2/0x660 [amdgpu] [ 253.017493] local_pci_probe+0x4b/0xb0 [ 253.017746] work_for_cpu_fn+0x1a/0x30 [ 253.017995] process_one_work+0x21e/0x680 [ 253.018248] worker_thread+0x190/0x330 [ 253.018500] ? __pfx_worker_thread+0x10/0x10 [ 253.018746] kthread+0xe7/0x120 [ 253.018988] ? __pfx_kthread+0x10/0x10 [ 253.019231] ret_from_fork+0x3c/0x60 [ 253.019468] ? __pfx_kthread+0x10/0x10 [ 253.019701] ret_from_fork_asm+0x1a/0x30 [ 253.019939] </TASK> v2: s/spin_trylock/spin_lock_irqsave to be safe (Christian). Fixes: e864180 ("drm/amdgpu: Add lock around VF RLCG interface") Cc: lin cao <[email protected]> Cc: Jingwen Chen <[email protected]> Cc: Victor Skvortsov <[email protected]> Cc: Zhigang Luo <[email protected]> Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Suggested-by: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> [ Minor context change fixed. ] Signed-off-by: Wenshan Lan <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 687aa0c ] Transport assignment may race with module unload. Protect new_transport from becoming a stale pointer. This also takes care of an insecure call in vsock_use_local_transport(); add a lockdep assert. BUG: unable to handle page fault for address: fffffbfff8056000 Oops: Oops: 0000 [#1] SMP KASAN RIP: 0010:vsock_assign_transport+0x366/0x600 Call Trace: vsock_connect+0x59c/0xc40 __sys_connect+0xe8/0x100 __x64_sys_connect+0x6e/0xc0 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: c0cfa2d ("vsock: add multi-transports support") Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: Michal Luczaj <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c489f32 ] syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in: Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2371d94d248d126c1eb1 Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 22fc46c ] atmarpd_dev_ops does not implement the send method, which may cause crash as bellow. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246 RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000 RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000 RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287 R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00 R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88 FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 ____sys_sendmsg+0x52d/0x830 net/socket.c:2566 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620 __sys_sendmmsg+0x227/0x430 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…-flight commit ecf371f upstream. Reject migration of SEV{-ES} state if either the source or destination VM is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the section between incrementing created_vcpus and online_vcpus. The bulk of vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs in parallel, and so sev_info.es_active can get toggled from false=>true in the destination VM after (or during) svm_vcpu_create(), resulting in an SEV{-ES} VM effectively having a non-SEV{-ES} vCPU. The issue manifests most visibly as a crash when trying to free a vCPU's NULL VMSA page in an SEV-ES VM, but any number of things can go wrong. BUG: unable to handle page fault for address: ffffebde00000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline] RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline] RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline] RIP: 0010:PageHead include/linux/page-flags.h:866 [inline] RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067 Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0 RSP: 0018:ffff8984551978d0 EFLAGS: 00010246 RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000 RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000 R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000 R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000 FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169 svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515 kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396 kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline] kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490 kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895 kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310 kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369 __fput+0x3e4/0x9e0 fs/file_table.c:465 task_work_run+0x1a9/0x220 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x7f0/0x25b0 kernel/exit.c:953 do_group_exit+0x203/0x2d0 kernel/exit.c:1102 get_signal+0x1357/0x1480 kernel/signal.c:3034 arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218 do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f87a898e969 </TASK> Modules linked in: gq(O) gsmi: Log Shutdown Reason 0x03 CR2: ffffebde00000000 ---[ end trace 0000000000000000 ]--- Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing the host is likely desirable due to the VMSA being consumed by hardware. E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a bogus VMSA page. Accessing PFN 0 is "fine"-ish now that it's sequestered away thanks to L1TF, but panicking in this scenario is preferable to potentially running with corrupted state. Reported-by: Alexander Potapenko <[email protected]> Tested-by: Alexander Potapenko <[email protected]> Fixes: 0b020f5 ("KVM: SEV: Add support for SEV-ES intra host migration") Fixes: b566393 ("KVM: SEV: Add support for SEV intra host migration") Cc: [email protected] Cc: James Houghton <[email protected]> Cc: Peter Gonda <[email protected]> Reviewed-by: Liam Merwick <[email protected]> Tested-by: Liam Merwick <[email protected]> Reviewed-by: James Houghton <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 47bb584 upstream. When running an SEV-SNP guest with a sufficiently large amount of memory (1TB+), the host can experience CPU soft lockups when running an operation in kvm_vm_set_mem_attributes() to set memory attributes on the whole range of guest memory. watchdog: BUG: soft lockup - CPU#8 stuck for 26s! [qemu-kvm:6372] CPU: 8 UID: 0 PID: 6372 Comm: qemu-kvm Kdump: loaded Not tainted 6.15.0-rc7.20250520.el9uek.rc1.x86_64 #1 PREEMPT(voluntary) Hardware name: Oracle Corporation ORACLE SERVER E4-2c/Asm,MB Tray,2U,E4-2c, BIOS 78016600 11/13/2024 RIP: 0010:xas_create+0x78/0x1f0 Code: 00 00 00 41 80 fc 01 0f 84 82 00 00 00 ba 06 00 00 00 bd 06 00 00 00 49 8b 45 08 4d 8d 65 08 41 39 d6 73 20 83 ed 06 48 85 c0 <74> 67 48 89 c2 83 e2 03 48 83 fa 02 75 0c 48 3d 00 10 00 00 0f 87 RSP: 0018:ffffad890a34b940 EFLAGS: 00000286 RAX: ffff96f30b261daa RBX: ffffad890a34b9c8 RCX: 0000000000000000 RDX: 000000000000001e RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffad890a356868 R13: ffffad890a356860 R14: 0000000000000000 R15: ffffad890a356868 FS: 00007f5578a2a400(0000) GS:ffff97ed317e1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f015c70fb18 CR3: 00000001109fd006 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> xas_store+0x58/0x630 __xa_store+0xa5/0x130 xa_store+0x2c/0x50 kvm_vm_set_mem_attributes+0x343/0x710 [kvm] kvm_vm_ioctl+0x796/0xab0 [kvm] __x64_sys_ioctl+0xa3/0xd0 do_syscall_64+0x8c/0x7a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f5578d031bb Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2d 4c 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe0a742b88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000000004020aed2 RCX: 00007f5578d031bb RDX: 00007ffe0a742c80 RSI: 000000004020aed2 RDI: 000000000000000b RBP: 0000010000000000 R08: 0000010000000000 R09: 0000017680000000 R10: 0000000000000080 R11: 0000000000000246 R12: 00005575e5f95120 R13: 00007ffe0a742c80 R14: 0000000000000008 R15: 00005575e5f961e0 While looping through the range of memory setting the attributes, call cond_resched() to give the scheduler a chance to run a higher priority task on the runqueue if necessary and avoid staying in kernel mode long enough to trigger the lockup. Fixes: 5a47555 ("KVM: Introduce per-page memory attributes") Cc: [email protected] # 6.12.x Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: Liam Merwick <[email protected]> Reviewed-by: Pankaj Gupta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 99af22c upstream. alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even when the alloc_tag_cttype is not allocated because: 1) alloc tagging is disabled because mem profiling is disabled (!alloc_tag_cttype) 2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype) 3) alloc tagging is enabled, but failed initialization (!alloc_tag_cttype or IS_ERR(alloc_tag_cttype)) In all cases, alloc_tag_cttype is not allocated, and therefore alloc_tag_top_users() should not attempt to acquire the semaphore. This leads to a crash on memory allocation failure by attempting to acquire a non-existent semaphore: Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df] CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G D 6.16.0-rc2 #1 VOLUNTARY Tainted: [D]=DIE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:down_read_trylock+0xaa/0x3b0 Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000 RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070 RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1 R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37 R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000 FS: 00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0 Call Trace: <TASK> codetag_trylock_module_list+0xd/0x20 alloc_tag_top_users+0x369/0x4b0 __show_mem+0x1cd/0x6e0 warn_alloc+0x2b1/0x390 __alloc_frozen_pages_noprof+0x12b9/0x21a0 alloc_pages_mpol+0x135/0x3e0 alloc_slab_page+0x82/0xe0 new_slab+0x212/0x240 ___slab_alloc+0x82a/0xe00 </TASK> As David Wang points out, this issue became easier to trigger after commit 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init"). Before the commit, the issue occurred only when it failed to allocate and initialize alloc_tag_cttype or if a memory allocation fails before alloc_tag_init() is called. After the commit, it can be easily triggered when memory profiling is compiled but disabled at boot. To properly determine whether alloc_tag_init() has been called and its data structures initialized, verify that alloc_tag_cttype is a valid pointer before acquiring the semaphore. If the variable is NULL or an error value, it has not been properly initialized. In such a case, just skip and do not attempt to acquire the semaphore. [[email protected]: v3] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init") Fixes: 1438d34 ("lib: add memory allocations report in show_mem()") Signed-off-by: Harry Yoo <[email protected]> Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Acked-by: Suren Baghdasaryan <[email protected]> Tested-by: Raghavendra K T <[email protected]> Cc: Casey Chen <[email protected]> Cc: David Wang <[email protected]> Cc: Kent Overstreet <[email protected]> Cc: Yuanyuan Zhong <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 1961d20 ] When building the free space tree with the block group tree feature enabled, we can hit an assertion failure like this: BTRFS info (device loop0 state M): rebuilding free space tree assertion failed: ret == 0, in fs/btrfs/free-space-tree.c:1102 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1102! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP Modules linked in: CPU: 1 UID: 0 PID: 6592 Comm: syz-executor322 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 lr : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 sp : ffff8000a4ce7600 x29: ffff8000a4ce76e0 x28: ffff0000c9bc6000 x27: ffff0000ddfff3d8 x26: ffff0000ddfff378 x25: dfff800000000000 x24: 0000000000000001 x23: ffff8000a4ce7660 x22: ffff70001499cecc x21: ffff0000e1d8c160 x20: ffff0000e1cb7800 x19: ffff0000e1d8c0b0 x18: 00000000ffffffff x17: ffff800092f39000 x16: ffff80008ad27e48 x15: ffff700011e740c0 x14: 1ffff00011e740c0 x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011e740c0 x10: 0000000000ff0100 x9 : 94ef24f55d2dbc00 x8 : 94ef24f55d2dbc00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a4ce6f98 x4 : ffff80008f415ba0 x3 : ffff800080548ef0 x2 : 0000000000000000 x1 : 0000000100000000 x0 : 000000000000003e Call trace: populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 (P) btrfs_rebuild_free_space_tree+0x14c/0x54c fs/btrfs/free-space-tree.c:1337 btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074 btrfs_remount_rw fs/btrfs/super.c:1319 [inline] btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543 reconfigure_super+0x1d4/0x6f0 fs/super.c:1083 do_remount fs/namespace.c:3365 [inline] path_mount+0xb34/0xde0 fs/namespace.c:4200 do_mount fs/namespace.c:4221 [inline] __do_sys_mount fs/namespace.c:4432 [inline] __se_sys_mount fs/namespace.c:4409 [inline] __arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: f0047182 91178042 528089c3 9771d47b (d4210000) ---[ end trace 0000000000000000 ]--- This happens because we are processing an empty block group, which has no extents allocated from it, there are no items for this block group, including the block group item since block group items are stored in a dedicated tree when using the block group tree feature. It also means this is the block group with the highest start offset, so there are no higher keys in the extent root, hence btrfs_search_slot_for_read() returns 1 (no higher key found). Fix this by asserting 'ret' is 0 only if the block group tree feature is not enabled, in which case we should find a block group item for the block group since it's stored in the extent root and block group item keys are greater than extent item keys (the value for BTRFS_BLOCK_GROUP_ITEM_KEY is 192 and for BTRFS_EXTENT_ITEM_KEY and BTRFS_METADATA_ITEM_KEY the values are 168 and 169 respectively). In case 'ret' is 1, we just need to add a record to the free space tree which spans the whole block group, and we can achieve this by making 'ret == 0' as the while loop's condition. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

jira LE-3564 Rebuild_History Non-Buildable kernel-6.12.0-55.21.1.el10_0 commit-author Michal Swiatkowski <[email protected]> commit 80f2ab4 Currently iwdev->rf is allocated in irdma_probe(), but free in irdma_ib_dealloc_device(). It can be misleading. Move the free to irdma_remove() to be more obvious. Freeing in irdma_ib_dealloc_device() leads to KASAN use-after-free issue. Which can also lead to NULL pointer dereference. Fix this. irdma_deinit_interrupts() can't be moved before freeing iwdef->rf, because in this case deinit interrupts will be done before freeing irqs. The simplest solution is to move kfree(iwdev->rf) to irdma_remove(). Reproducer: sudo rmmod irdma Minified splat(s): BUG: KASAN: use-after-free in irdma_remove+0x257/0x2d0 [irdma] Call Trace: <TASK> ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kfree+0x253/0x450 ? irdma_remove+0x257/0x2d0 [irdma] kasan_report+0xed/0x120 ? irdma_remove+0x257/0x2d0 [irdma] irdma_remove+0x257/0x2d0 [irdma] auxiliary_bus_remove+0x56/0x80 device_release_driver_internal+0x371/0x530 ? kernfs_put.part.0+0x147/0x310 driver_detach+0xbf/0x180 bus_remove_driver+0x11b/0x2a0 auxiliary_driver_unregister+0x1a/0x50 irdma_exit_module+0x40/0x4c [irdma] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:ice_free_rdma_qvector+0x2a/0xa0 [ice] Call Trace: ? ice_free_rdma_qvector+0x2a/0xa0 [ice] irdma_remove+0x179/0x2d0 [irdma] auxiliary_bus_remove+0x56/0x80 device_release_driver_internal+0x371/0x530 ? kobject_put+0x61/0x4b0 driver_detach+0xbf/0x180 bus_remove_driver+0x11b/0x2a0 auxiliary_driver_unregister+0x1a/0x50 irdma_exit_module+0x40/0x4c [irdma] Reported-by: Marcin Szycik <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Fixes: 3e0d3cb ("ice, irdma: move interrupts code to irdma") Reviewed-by: Marcin Szycik <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Signed-off-by: Tatyana Nikolova <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> (cherry picked from commit 80f2ab4) Signed-off-by: Jonathan Maple <[email protected]>

JIRA: https://issues.redhat.com/browse/RHEL-83567 Upstream commit(s): commit 0153f36 Author: Michal Kubiak <[email protected]> Date: Tue May 13 12:55:27 2025 +0200 ice: fix Tx scheduler error handling in XDP callback When the XDP program is loaded, the XDP callback adds new Tx queues. This means that the callback must update the Tx scheduler with the new queue number. In the event of a Tx scheduler failure, the XDP callback should also fail and roll back any changes previously made for XDP preparation. The previous implementation had a bug that not all changes made by the XDP callback were rolled back. This caused the crash with the following call trace: [ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5 [ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI [ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ #14 PREEMPT(voluntary) [ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [ +0.010946] RIP: 0010:__ice_update_sample+0x39/0xe0 [ice] [...] [ +0.002715] Call Trace: [ +0.002452] <IRQ> [ +0.002021] ? __die_body.cold+0x19/0x29 [ +0.003922] ? die_addr+0x3c/0x60 [ +0.003319] ? exc_general_protection+0x17c/0x400 [ +0.004707] ? asm_exc_general_protection+0x26/0x30 [ +0.004879] ? __ice_update_sample+0x39/0xe0 [ice] [ +0.004835] ice_napi_poll+0x665/0x680 [ice] [ +0.004320] __napi_poll+0x28/0x190 [ +0.003500] net_rx_action+0x198/0x360 [ +0.003752] ? update_rq_clock+0x39/0x220 [ +0.004013] handle_softirqs+0xf1/0x340 [ +0.003840] ? sched_clock_cpu+0xf/0x1f0 [ +0.003925] __irq_exit_rcu+0xc2/0xe0 [ +0.003665] common_interrupt+0x85/0xa0 [ +0.003839] </IRQ> [ +0.002098] <TASK> [ +0.002106] asm_common_interrupt+0x26/0x40 [ +0.004184] RIP: 0010:cpuidle_enter_state+0xd3/0x690 Fix this by performing the missing unmapping of XDP queues from q_vectors and setting the XDP rings pointer back to NULL after all those queues are released. Also, add an immediate exit from the XDP callback in case of ring preparation failure. Fixes: efc2214 ("ice: Add support for XDP") Reviewed-by: Dawid Osuchowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Michal Kubiak <[email protected]> Reviewed-by: Aleksandr Loktionov <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Jesse Brandeburg <[email protected]> Tested-by: Saritha Sanigani <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Petr Oros <[email protected]>

If the PHY driver uses another PHY internally (e.g. in case of eUSB2, repeaters are represented as PHYs), then it would trigger the following lockdep splat because all PHYs use a single static lockdep key and thus lockdep can not identify whether there is a dependency or not and reports a false positive. Make PHY subsystem use dynamic lockdep keys, assigning each driver a separate key. This way lockdep can correctly identify dependency graph between mutexes. ============================================ WARNING: possible recursive locking detected 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted -------------------------------------------- kworker/u51:0/78 is trying to acquire lock: ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c but task is already holding lock: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&phy->mutex); lock(&phy->mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u51:0/78: #0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec #1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec #2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188 #3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c stack backtrace: CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024 Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 print_deadlock_bug+0x258/0x348 __lock_acquire+0x10fc/0x1f84 lock_acquire+0x1c8/0x338 __mutex_lock+0xb8/0x59c mutex_lock_nested+0x24/0x30 phy_init+0x4c/0x12c snps_eusb2_hsphy_init+0x54/0x1a0 phy_init+0xe0/0x12c dwc3_core_init+0x450/0x10b4 dwc3_core_probe+0xce4/0x15fc dwc3_probe+0x64/0xb0 platform_probe+0x68/0xc4 really_probe+0xbc/0x298 __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x208/0x5ec worker_thread+0x1c0/0x368 kthread+0x14c/0x20c ret_from_fork+0x10/0x20 Fixes: 3584f63 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater") Fixes: e246355 ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver") Reviewed-by: Neil Armstrong <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Reported-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>

This reverts commit 7796c97. This patch broke Dragonboard 845c (sdm845). I see: Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f20003e8 [#1] SMP pc : qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] lr : snd_soc_dai_set_channel_map+0x34/0x78 Call trace: qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] (P) sdm845_dai_init+0x18c/0x2e0 [snd_soc_sdm845] snd_soc_link_init+0x28/0x6c snd_soc_bind_card+0x5f4/0xb0c snd_soc_register_card+0x148/0x1a4 devm_snd_soc_register_card+0x50/0xb0 sdm845_snd_platform_probe+0x124/0x148 [snd_soc_sdm845] platform_probe+0x6c/0xd0 really_probe+0xc0/0x2a4 __driver_probe_device+0x7c/0x130 driver_probe_device+0x40/0x118 __device_attach_driver+0xc4/0x108 bus_for_each_drv+0x8c/0xf0 __device_attach+0xa4/0x198 device_initial_probe+0x18/0x28 bus_probe_device+0xb8/0xbc deferred_probe_work_func+0xac/0xfc process_one_work+0x244/0x658 worker_thread+0x1b4/0x360 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Kernel panic - not syncing: BRK handler: Fatal exception Dan has also reported following issues with the original patch https://lore.kernel.org/all/[email protected]/ Bug #1: The zeroeth element of ctrl->pconfig[] is supposed to be unused. We start counting at 1. However this code sets ctrl->pconfig[0].ch_mask = 128. Bug #2: There are SLIM_MAX_TX_PORTS (16) elements in tx_ch[] array but only QCOM_SDW_MAX_PORTS + 1 (15) in the ctrl->pconfig[] array so it corrupts memory like Yongqin Liu pointed out. Bug 3: Like Jie Gan pointed out, it erases all the tx information with the rx information. Cc: [email protected] # v6.15+ Signed-off-by: Amit Pundir <[email protected]> Acked-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>

The 'icc_bw_lock' mutex is introduced in commit af42269 ("interconnect: Fix locking for runpm vs reclaim") in order to decouple serialization of bw aggregation from codepaths that require memory allocation. However commit d30f83d ("interconnect: core: Add dynamic id allocation support") added a devm_kasprintf() call into a path protected by the 'icc_bw_lock' which causes the following lockdep warning on machines like the Lenovo ThinkPad X13s: ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc3 #15 Not tainted ------------------------------------------------------ (udev-worker)/342 is trying to acquire lock: ffffb973f7ec4638 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_node_track_caller_noprof+0xa0/0x3e0 but task is already holding lock: ffffb973f7f7f0e8 (icc_bw_lock){+.+.}-{4:4}, at: icc_node_add+0x44/0x154 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (icc_bw_lock){+.+.}-{4:4}: icc_init+0x48/0x108 do_one_initcall+0x64/0x30c kernel_init_freeable+0x27c/0x500 kernel_init+0x20/0x1d8 ret_from_fork+0x10/0x20 -> #0 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x136c/0x2114 lock_acquire+0x1c8/0x354 fs_reclaim_acquire+0x74/0xa8 __kmalloc_node_track_caller_noprof+0xa0/0x3e0 devm_kmalloc+0x54/0x124 devm_kvasprintf+0x74/0xd4 devm_kasprintf+0x58/0x80 icc_node_add+0xb4/0x154 qcom_osm_l3_probe+0x20c/0x314 [icc_osm_l3] platform_probe+0x68/0xd8 really_probe+0xc0/0x38c __driver_probe_device+0x7c/0x160 driver_probe_device+0x40/0x110 __driver_attach+0xfc/0x208 bus_for_each_dev+0x74/0xd0 driver_attach+0x24/0x30 bus_add_driver+0x110/0x234 driver_register+0x60/0x128 __platform_driver_register+0x24/0x30 osm_l3_driver_init+0x20/0x1000 [icc_osm_l3] do_one_initcall+0x64/0x30c do_init_module+0x58/0x23c load_module+0x1df8/0x1f70 init_module_from_file+0x88/0xc4 idempotent_init_module+0x188/0x280 __arm64_sys_finit_module+0x6c/0xd8 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x4c/0x158 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(icc_bw_lock); lock(fs_reclaim); lock(icc_bw_lock); lock(fs_reclaim); *** DEADLOCK *** The icc_node_add() functions is not designed to fail, and as such it should not do any memory allocation. In order to avoid this, add a new helper function for the name generation to be called by drivers which are using the new dynamic id feature. Fixes: d30f83d ("interconnect: core: Add dynamic id allocation support") Signed-off-by: Gabor Juhos <[email protected]> Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Johan Hovold <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]>

We have observed kernel panics when using timerlat with stack saving, with the following dmesg output: memcpy: detected buffer overflow: 88 byte write of buffer size 0 WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0 CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy) Call Trace: <TASK> ? trace_buffer_lock_reserve+0x2a/0x60 __fortify_panic+0xd/0xf __timerlat_dump_stack.cold+0xd/0xd timerlat_dump_stack.part.0+0x47/0x80 timerlat_fd_read+0x36d/0x390 vfs_read+0xe2/0x390 ? syscall_exit_to_user_mode+0x1d5/0x210 ksys_read+0x73/0xe0 do_syscall_64+0x7b/0x160 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e __timerlat_dump_stack() constructs the ftrace stack entry like this: struct stack_entry *entry; ... memcpy(&entry->caller, fstack->calls, size); entry->size = fstack->nr_entries; Since commit e7186af ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure"), struct stack_entry marks its caller field with __counted_by(size). At the time of the memcpy, entry->size contains garbage from the ringbuffer, which under some circumstances is zero, triggering a kernel panic by buffer overflow. Populate the size field before the memcpy so that the out-of-bounds check knows the correct size. This is analogous to __ftrace_trace_stack(). Cc: [email protected] Cc: John Kacur <[email protected]> Cc: Luis Goncalves <[email protected]> Cc: Attila Fazekas <[email protected]> Link: https://lore.kernel.org/[email protected] Fixes: e7186af ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure") Signed-off-by: Tomas Glozar <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>

JIRA: https://issues.redhat.com/browse/RHEL-78934 commit 461f24b Author: Andy Shevchenko <[email protected]> Date: Wed, 12 Feb 2025 21:28:04 +0200 Intel Merrifield SoC uses these endpoints for tracing and they cannot be re-allocated if being used because the side band flow control signals are hard wired to certain endpoints: • 1 High BW Bulk IN (IN#1) (RTIT) • 1 1KB BW Bulk IN (IN#8) + 1 1KB BW Bulk OUT (Run Control) (OUT#8) In device mode, since RTIT (EP#1) and EXI/RunControl (EP#8) uses External Buffer Control (EBC) mode, these endpoints are to be mapped to EBC mode (to be done by EXI target driver). Additionally TRB for RTIT and EXI are maintained in STM (System Trace Module) unit and the EXI target driver will as well configure the TRB location for EP #1 IN and EP#8 (IN and OUT). Since STM/PTI and EXI hardware blocks manage these endpoints and interface to OTG3 controller through EBC interface, there is no need to enable any events (such as XferComplete etc) for these end points. Signed-off-by: Andy Shevchenko <[email protected]> Tested-by: Ferry Toth <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Desnes Nunes <[email protected]>

JIRA: https://issues.redhat.com/browse/RHEL-78934 JIRA: https://issues.redhat.com/browse/RHEL-99039 CVE: CVE-2025-22020 commit 4676741 Author: Luo Qiu <[email protected]> Date: Mon, 17 Mar 2025 18:14:38 +0800 This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] Read of size 8 at addr ffff888136335380 by task kworker/6:0/140241 CPU: 6 UID: 0 PID: 140241 Comm: kworker/6:0 Kdump: loaded Tainted: G E 6.14.0-rc6+ #1 Tainted: [E]=UNSIGNED_MODULE Hardware name: LENOVO 30FNA1V7CW/1057, BIOS S0EKT54A 07/01/2024 Workqueue: events rtsx_usb_ms_poll_card [rtsx_usb_ms] Call Trace: <TASK> dump_stack_lvl+0x51/0x70 print_address_description.constprop.0+0x27/0x320 ? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] print_report+0x3e/0x70 kasan_report+0xab/0xe0 ? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] ? __pfx_rtsx_usb_ms_poll_card+0x10/0x10 [rtsx_usb_ms] ? __pfx___schedule+0x10/0x10 ? kick_pool+0x3b/0x270 process_one_work+0x357/0x660 worker_thread+0x390/0x4c0 ? __pfx_worker_thread+0x10/0x10 kthread+0x190/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 161446: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x1a7/0x470 memstick_alloc_host+0x1f/0xe0 [memstick] rtsx_usb_ms_drv_probe+0x47/0x320 [rtsx_usb_ms] platform_probe+0x60/0xe0 call_driver_probe+0x35/0x120 really_probe+0x123/0x410 __driver_probe_device+0xc7/0x1e0 driver_probe_device+0x49/0xf0 __device_attach_driver+0xc6/0x160 bus_for_each_drv+0xe4/0x160 __device_attach+0x13a/0x2b0 bus_probe_device+0xbd/0xd0 device_add+0x4a5/0x760 platform_device_add+0x189/0x370 mfd_add_device+0x587/0x5e0 mfd_add_devices+0xb1/0x130 rtsx_usb_probe+0x28e/0x2e0 [rtsx_usb] usb_probe_interface+0x15c/0x460 call_driver_probe+0x35/0x120 really_probe+0x123/0x410 __driver_probe_device+0xc7/0x1e0 driver_probe_device+0x49/0xf0 __device_attach_driver+0xc6/0x160 bus_for_each_drv+0xe4/0x160 __device_attach+0x13a/0x2b0 rebind_marked_interfaces.isra.0+0xcc/0x110 usb_reset_device+0x352/0x410 usbdev_do_ioctl+0xe5c/0x1860 usbdev_ioctl+0xa/0x20 __x64_sys_ioctl+0xc5/0xf0 do_syscall_64+0x59/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 161506: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x36/0x60 __kasan_slab_free+0x34/0x50 kfree+0x1fd/0x3b0 device_release+0x56/0xf0 kobject_cleanup+0x73/0x1c0 rtsx_usb_ms_drv_remove+0x13d/0x220 [rtsx_usb_ms] platform_remove+0x2f/0x50 device_release_driver_internal+0x24b/0x2e0 bus_remove_device+0x124/0x1d0 device_del+0x239/0x530 platform_device_del.part.0+0x19/0xe0 platform_device_unregister+0x1c/0x40 mfd_remove_devices_fn+0x167/0x170 device_for_each_child_reverse+0xc9/0x130 mfd_remove_devices+0x6e/0xa0 rtsx_usb_disconnect+0x2e/0xd0 [rtsx_usb] usb_unbind_interface+0xf3/0x3f0 device_release_driver_internal+0x24b/0x2e0 proc_disconnect_claim+0x13d/0x220 usbdev_do_ioctl+0xb5e/0x1860 usbdev_ioctl+0xa/0x20 __x64_sys_ioctl+0xc5/0xf0 do_syscall_64+0x59/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x20/0x40 kasan_record_aux_stack+0x85/0x90 insert_work+0x29/0x100 __queue_work+0x34a/0x540 call_timer_fn+0x2a/0x160 expire_timers+0x5f/0x1f0 __run_timer_base.part.0+0x1b6/0x1e0 run_timer_softirq+0x8b/0xe0 handle_softirqs+0xf9/0x360 __irq_exit_rcu+0x114/0x130 sysvec_apic_timer_interrupt+0x72/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 Second to last potentially related work creation: kasan_save_stack+0x20/0x40 kasan_record_aux_stack+0x85/0x90 insert_work+0x29/0x100 __queue_work+0x34a/0x540 call_timer_fn+0x2a/0x160 expire_timers+0x5f/0x1f0 __run_timer_base.part.0+0x1b6/0x1e0 run_timer_softirq+0x8b/0xe0 handle_softirqs+0xf9/0x360 __irq_exit_rcu+0x114/0x130 sysvec_apic_timer_interrupt+0x72/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 The buggy address belongs to the object at ffff888136335000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 896 bytes inside of freed 2048-byte region [ffff888136335000, ffff888136335800) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x136330 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff) page_type: f5(slab) raw: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002 head: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 0017ffffc0000003 ffffea0004d8cc01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888136335280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888136335300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888136335380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888136335400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888136335480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 6827ca5 ("memstick: rtsx_usb_ms: Support runtime power management") Signed-off-by: Luo Qiu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Desnes Nunes <[email protected]>

JIRA: https://issues.redhat.com/browse/RHEL-75598 CVE: CVE-2024-57996 commit 1068568 Author: Octavian Purdila <[email protected]> Date: Tue Dec 3 19:05:19 2024 -0800 net_sched: sch_sfq: don't allow 1 packet limit The current implementation does not work correctly with a limit of 1. iproute2 actually checks for this and this patch adds the check in kernel as well. This fixes the following syzkaller reported crash: UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x125/0x19f lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:148 [inline] __ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347 sfq_link net/sched/sch_sfq.c:210 [inline] sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238 sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500 sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296 netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline] dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362 __dev_close_many+0x214/0x350 net/core/dev.c:1468 dev_close_many+0x207/0x510 net/core/dev.c:1506 unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738 unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695 unregister_netdevice include/linux/netdevice.h:2893 [inline] __tun_detach+0x6b6/0x1600 drivers/net/tun.c:689 tun_detach drivers/net/tun.c:705 [inline] tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640 __fput+0x203/0x840 fs/file_table.c:280 task_work_run+0x129/0x1b0 kernel/task_work.c:185 exit_task_work include/linux/task_work.h:33 [inline] do_exit+0x5ce/0x2200 kernel/exit.c:931 do_group_exit+0x144/0x310 kernel/exit.c:1046 __do_sys_exit_group kernel/exit.c:1057 [inline] __se_sys_exit_group kernel/exit.c:1055 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055 do_syscall_64+0x6c/0xd0 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7fe5e7b52479 Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f. RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0 R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270 The crash can be also be reproduced with the following (with a tc recompiled to allow for sfq limits of 1): tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s ../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1 ifconfig dummy0 up ping -I dummy0 -f -c2 -W0.1 8.8.8.8 sleep 1 Scenario that triggers the crash: * the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1 * TBF dequeues: it peeks from SFQ which moves the packet to the gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so it schedules itself for later. * the second packet is sent and TBF tries to queues it to SFQ. qdisc qlen is now 2 and because the SFQ limit is 1 the packet is dropped by SFQ. At this point qlen is 1, and all of the SFQ slots are empty, however q->tail is not NULL. At this point, assuming no more packets are queued, when sch_dequeue runs again it will decrement the qlen for the current empty slot causing an underflow and the subsequent out of bounds access. Reported-by: syzbot <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Octavian Purdila <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Ivan Vecera <[email protected]>

jira VULN-8636 cve CVE-2024-50151 commit-author Paulo Alcantara <[email protected]> commit 1ab6032 upstream-diff used linux-stable LT-5.15 sha e07d05b [ Upstream commit 1ab6032 ] When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 ctrliq#1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb Reported-by: David Howells <[email protected]> Fixes: e77fe73 ("cifs: we can not use small padding iovs together with encryption") Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit e07d05b) Signed-off-by: Marcin Wcisło <[email protected]>

jira VULN-8637 cve CVE-2024-50151 commit-author Paulo Alcantara <[email protected]> commit 1ab6032 When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 ctrliq#1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb Reported-by: David Howells <[email protected]> Fixes: e77fe73 ("cifs: we can not use small padding iovs together with encryption") Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Signed-off-by: Steve French <[email protected]> (cherry picked from commit 1ab6032) Signed-off-by: Marcin Wcisło <[email protected]>

jira VULN-8636 cve CVE-2024-50151 commit-author Paulo Alcantara <[email protected]> commit 1ab6032 upstream-diff used linux-stable LT-5.15 sha e07d05b [ Upstream commit 1ab6032 ] When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb Reported-by: David Howells <[email protected]> Fixes: e77fe73 ("cifs: we can not use small padding iovs together with encryption") Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]> (cherry picked from commit e07d05b) Signed-off-by: Marcin Wcisło <[email protected]>

This marks 0x29 as accelerometer address on Dell Precision 3551. I followed previous works of Paul Menzel and Hans de Goede to verify it: $ cd /sys/bus/pci/drivers/i801_smbus/0000\:00\:1f.4 $ ls -d i2c-? i2c-0 $ sudo modprobe i2c-dev $ sudo i2cdetect 0 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-0. I will probe address range 0x08-0x77. Continue? [Y/n] Y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 08 -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- -- 30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- -- 40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- -- 50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- $ echo lis3lv02d 0x29 > sudo tee /sys/bus/i2c/devices/i2c-0/new_device lis3lv02d 0x29 $ sudo dmesg [ 0.000000] Linux version 6.12.28 (nixbld@localhost) (gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP PREEMPT_DYNAMIC Fri May 9 07:50:53 UTC 2025 [...] [ 0.000000] DMI: Dell Inc. Precision 3551/07YHW8, BIOS 1.18.0 10/03/2022 [...] [ 3749.077624] lis3lv02d_i2c 0-0029: supply Vdd not found, using dummy regulator [ 3749.077732] lis3lv02d_i2c 0-0029: supply Vdd_IO not found, using dummy regulator [ 3749.098674] lis3lv02d: 8 bits 3DC sensor found [ 3749.182480] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input28 [ 3749.182899] i2c i2c-0: new_device: Instantiated device lis3lv02d at 0x29 Signed-off-by: Jan-Niklas Burfeind <[email protected]> Reviewed-by: Paul Menzel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>

commit b1bf1a7 upstream. If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP is enabled for dm-bufio. However, when bufio tries to evict buffers, there is a chance to trigger scheduling in spin_lock_bh, the following warning is hit: BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2 preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 4 locks held by kworker/2:2/123: #0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970 #1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970 #2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710 #3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 #305 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: dm_bufio_cache do_global_cleanup Call Trace: <TASK> dump_stack_lvl+0x53/0x70 __might_resched+0x360/0x4e0 do_global_cleanup+0x2f5/0x710 process_one_work+0x7db/0x1970 worker_thread+0x518/0xea0 kthread+0x359/0x690 ret_from_fork+0xf3/0x1b0 ret_from_fork_asm+0x1a/0x30 </TASK> That can be reproduced by: veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb SIZE=$(blockdev --getsz /dev/vda) dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet" mount /dev/dm-0 /mnt -o ro echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes [read files in /mnt] Cc: [email protected] # v6.4+ Fixes: 450e8de ("dm bufio: improve concurrent IO performance") Signed-off-by: Wang Shuai <[email protected]> Signed-off-by: Sheng Yong <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 85a3bce upstream. We have observed kernel panics when using timerlat with stack saving, with the following dmesg output: memcpy: detected buffer overflow: 88 byte write of buffer size 0 WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0 CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy) Call Trace: <TASK> ? trace_buffer_lock_reserve+0x2a/0x60 __fortify_panic+0xd/0xf __timerlat_dump_stack.cold+0xd/0xd timerlat_dump_stack.part.0+0x47/0x80 timerlat_fd_read+0x36d/0x390 vfs_read+0xe2/0x390 ? syscall_exit_to_user_mode+0x1d5/0x210 ksys_read+0x73/0xe0 do_syscall_64+0x7b/0x160 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e __timerlat_dump_stack() constructs the ftrace stack entry like this: struct stack_entry *entry; ... memcpy(&entry->caller, fstack->calls, size); entry->size = fstack->nr_entries; Since commit e7186af ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure"), struct stack_entry marks its caller field with __counted_by(size). At the time of the memcpy, entry->size contains garbage from the ringbuffer, which under some circumstances is zero, triggering a kernel panic by buffer overflow. Populate the size field before the memcpy so that the out-of-bounds check knows the correct size. This is analogous to __ftrace_trace_stack(). Cc: [email protected] Cc: John Kacur <[email protected]> Cc: Luis Goncalves <[email protected]> Cc: Attila Fazekas <[email protected]> Link: https://lore.kernel.org/[email protected] Fixes: e7186af ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure") Signed-off-by: Tomas Glozar <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d992ed7 upstream. When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_enter+0x29/0x40 [ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170 [ 549.186613] [ C16] do_idle+0x7a/0xc0 [ 549.186616] [ C16] cpu_startup_entry+0x25/0x30 [ 549.186618] [ C16] start_secondary+0x117/0x140 [ 549.186623] [ C16] common_startup_64+0x13e/0x148 [ 549.186628] [ C16] </TASK> Fixes: 3c47e8a ("net: libwx: Support to receive packets in NAPI") Cc: [email protected] Signed-off-by: Jiawen Wu <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 56448e7 upstream. Mitigate e.g. the following: # echo 1e789080.lpc-snoop > /sys/bus/platform/drivers/aspeed-lpc-snoop/unbind ... [ 120.363594] Unable to handle kernel NULL pointer dereference at virtual address 00000004 when write [ 120.373866] [00000004] *pgd=00000000 [ 120.377910] Internal error: Oops: 805 [#1] SMP ARM [ 120.383306] CPU: 1 UID: 0 PID: 315 Comm: sh Not tainted 6.15.0-rc1-00009-g926217bc7d7d-dirty #20 NONE ... [ 120.679543] Call trace: [ 120.679559] misc_deregister from aspeed_lpc_snoop_remove+0x84/0xac [ 120.692462] aspeed_lpc_snoop_remove from platform_remove+0x28/0x38 [ 120.700996] platform_remove from device_release_driver_internal+0x188/0x200 ... Fixes: 9f4f9ae ("drivers/misc: add Aspeed LPC snoop driver") Cc: [email protected] Cc: Jean Delvare <[email protected]> Acked-by: Jean Delvare <[email protected]> Link: https://patch.msgid.link/20250616-aspeed-lpc-snoop-fixes-v2-2-3cdd59c934d3@codeconstruct.com.au Signed-off-by: Andrew Jeffery <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 60ada4f ] syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while freeing inet_sk(sk)->inet_opt. The address was freed multiple times even though it was read-only memory. cipso_v4_sock_setattr() did nothing wrong, and the root cause was type confusion. The cited commit made it possible to create smc_sock as an INET socket. The issue is that struct smc_sock does not have struct inet_sock as the first member but hijacks AF_INET and AF_INET6 sk_family, which confuses various places. In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(), which is an address of a function in the text segment. $ pahole -C inet_sock vmlinux struct inet_sock { ... struct ip_options_rcu * inet_opt; /* 784 8 */ $ pahole -C smc_sock vmlinux struct smc_sock { ... void (*clcsk_data_ready)(struct sock *); /* 784 8 */ The same issue for another field was reported before. [2][3] At that time, an ugly hack was suggested [4], but it makes both INET and SMC code error-prone and hard to change. Also, yet another variant was fixed by a hacky commit 98d4435 ("net/smc: prevent NULL pointer dereference in txopt_get"). Instead of papering over the root cause by such hacks, we should not allow non-INET socket to reuse the INET infra. Let's add inet_sock as the first member of smc_sock. [0]: kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73 WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 Modules linked in: CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 sp : ffff8000a03a7730 x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3 x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00 x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000 x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360 x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000 Call trace: kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 [1]: Unable to handle kernel write to read-only memory at virtual address ffff8000891ac9a8 KASAN: probably user-memory-access in range [0x0000000448d64d40-0x0000000448d64d47] Mem abort info: ESR = 0x000000009600004e EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x0e: level 2 permission fault Data abort info: ISV = 0, ISS = 0x0000004e, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000207144000 [ffff8000891ac9a8] pgd=0000000000000000, p4d=100000020f950003, pud=100000020f951003, pmd=0040000201000781 Internal error: Oops: 000000009600004e [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 6946 Comm: syz.0.69 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1971 lr : add_ptr_to_bulk_krc_lock mm/slab_common.c:1838 [inline] lr : kvfree_call_rcu+0xfc/0x3f0 mm/slab_common.c:1963 sp : ffff8000a28a7730 x29: ffff8000a28a7730 x28: 00000000fffffff5 x27: 1fffe00018b09bb3 x26: 0000000000000001 x25: ffff80008f66e000 x24: ffff00019beaf498 x23: ffff00019beaf4c0 x22: 0000000000000000 x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: 0000000000000000 x18: 00000000ffffffff x17: ffff800093363000 x16: ffff80008052c6e4 x15: ffff700014514ecc x14: 1ffff00014514ecc x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700014514ecc x10: 0000000000000001 x9 : 0000000000000001 x8 : ffff00019beaf7b4 x7 : ffff800080a94154 x6 : 0000000000000000 x5 : ffff8000935efa60 x4 : 0000000000000008 x3 : ffff80008052c7fc x2 : 0000000000000001 x1 : ffff8000891ac9a0 x0 : 0000000000000001 Call trace: kvfree_call_rcu+0x31c/0x3f0 mm/slab_common.c:1967 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 Code: aa1f03e2 52800023 97ee1e8d b4000195 (f90006b4) Fixes: d25a92c ("net/smc: Introduce IPPROTO_SMC") Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Tested-by: [email protected] Reported-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/ Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=271fed3ed6f24600c364 # [2] Link: https://lore.kernel.org/netdev/[email protected]/ # [3] Link: https://lore.kernel.org/netdev/[email protected]/ # [4] Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: D. Wythe <[email protected]> Reviewed-by: Wang Liang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

… runtime [ Upstream commit 579d4f9 ] Assuming the "rx-vlan-filter" feature is enabled on a net device, the 8021q module will automatically add or remove VLAN 0 when the net device is put administratively up or down, respectively. There are a couple of problems with the above scheme. The first problem is a memory leak that can happen if the "rx-vlan-filter" feature is disabled while the device is running: # ip link add bond1 up type bond mode 0 # ethtool -K bond1 rx-vlan-filter off # ip link del dev bond1 When the device is put administratively down the "rx-vlan-filter" feature is disabled, so the 8021q module will not remove VLAN 0 and the memory will be leaked [1]. Another problem that can happen is that the kernel can automatically delete VLAN 0 when the device is put administratively down despite not adding it when the device was put administratively up since during that time the "rx-vlan-filter" feature was disabled. null-ptr-unref or bug_on[2] will be triggered by unregister_vlan_dev() for refcount imbalance if toggling filtering during runtime: $ ip link add bond0 type bond mode 0 $ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q $ ethtool -K bond0 rx-vlan-filter off $ ifconfig bond0 up $ ethtool -K bond0 rx-vlan-filter on $ ifconfig bond0 down $ ip link del vlan0 Root cause is as below: step1: add vlan0 for real_dev, such as bond, team. register_vlan_dev vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1 step2: disable vlan filter feature and enable real_dev step3: change filter from 0 to 1 vlan_device_event vlan_filter_push_vids ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0 step4: real_dev down vlan_device_event vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0 vlan_info_rcu_free //free vlan0 step5: delete vlan0 unregister_vlan_dev BUG_ON(!vlan_info); //vlan_info is null Fix both problems by noting in the VLAN info whether VLAN 0 was automatically added upon NETDEV_UP and based on that decide whether it should be deleted upon NETDEV_DOWN, regardless of the state of the "rx-vlan-filter" feature. [1] unreferenced object 0xffff8880068e3100 (size 256): comm "ip", pid 384, jiffies 4296130254 hex dump (first 32 bytes): 00 20 30 0d 80 88 ff ff 00 00 00 00 00 00 00 00 . 0............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 81ce31fa): __kmalloc_cache_noprof+0x2b5/0x340 vlan_vid_add+0x434/0x940 vlan_device_event.cold+0x75/0xa8 notifier_call_chain+0xca/0x150 __dev_notify_flags+0xe3/0x250 rtnl_configure_link+0x193/0x260 rtnl_newlink_create+0x383/0x8e0 __rtnl_newlink+0x22c/0xa40 rtnl_newlink+0x627/0xb00 rtnetlink_rcv_msg+0x6fb/0xb70 netlink_rcv_skb+0x11f/0x350 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 [2] kernel BUG at net/8021q/vlan.c:99! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 382 Comm: ip Not tainted 6.16.0-rc3 #61 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_vlan_dev (net/8021q/vlan.c:99 (discriminator 1)) RSP: 0018:ffff88810badf310 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810da84000 RCX: ffffffffb47ceb9a RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88810e8b43c8 RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6cefe80 R10: ffffffffb677f407 R11: ffff88810badf3c0 R12: ffff88810e8b4000 R13: 0000000000000000 R14: ffff88810642a5c0 R15: 000000000000017e FS: 00007f1ff68c20c0(0000) GS:ffff888163a24000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1ff5dad240 CR3: 0000000107e56000 CR4: 00000000000006f0 Call Trace: <TASK> rtnl_dellink (net/core/rtnetlink.c:3511 net/core/rtnetlink.c:3553) rtnetlink_rcv_msg (net/core/rtnetlink.c:6945) netlink_rcv_skb (net/netlink/af_netlink.c:2535) netlink_unicast (net/netlink/af_netlink.c:1314 net/netlink/af_netlink.c:1339) netlink_sendmsg (net/netlink/af_netlink.c:1883) ____sys_sendmsg (net/socket.c:712 net/socket.c:727 net/socket.c:2566) ___sys_sendmsg (net/socket.c:2622) __sys_sendmsg (net/socket.c:2652) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) Fixes: ad1afb0 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=a8b046e462915c65b10b Suggested-by: Ido Schimmel <[email protected]> Signed-off-by: Dong Chenchen <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Initialize README

01e482b

Basical Boiler Plate explination of how this repo will work.

gvrose8192 approved these changes Sep 10, 2024

View reviewed changes

PlaidCat merged commit 2515a93 into main Sep 12, 2024

PlaidCat deleted the jmaple_readme branch September 12, 2024 14:59

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Initialize README #1

Initialize README #1

Uh oh!

PlaidCat commented Sep 9, 2024

Uh oh!

gvrose8192 left a comment

Uh oh!

Uh oh!

Initialize README #1

Initialize README #1

Uh oh!

Conversation

PlaidCat commented Sep 9, 2024

Uh oh!

gvrose8192 left a comment

Choose a reason for hiding this comment

Uh oh!

Uh oh!