Could not query DRM device list: No such file or directory

[ardera]

flutter-pi outputs:

[flutter-pi] Could not query DRM device list: No such file or directory

and terminates.

[drowsell]

Here is the info from my Pi. I was the user experiencing this error.

raspinfo
System Information

Raspberry Pi 3 Model B Rev 1.2
PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"

Raspberry Pi reference 2022-04-04
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 27a8050c3c06e567c794620394a8c2d74262a516, stage2

Linux raspberrypi 5.15.32-v8+ #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022 aarch64 GNU/Linux
Revision : a02082
Serial : 00000000811a5c75
Model : Raspberry Pi 3 Model B Rev 1.2
Throttled flag : throttled=0x50000
Camera : supported=0 detected=0, libcamera interfaces=0

Videocore information

Mar 24 2022 13:20:54
Copyright (c) 2012 Broadcom
version e5a963efa66a1974127860b42e913d2374139ff5 (clean) (release) (start)

alloc failures: 0
compactions: 0
legacy block fails: 0

Filesystem information

Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 59825532 4359740 53001044 8% /
devtmpfs 437272 0 437272 0% /dev
tmpfs 471928 0 471928 0% /dev/shm
tmpfs 188772 896 187876 1% /run
tmpfs 5120 4 5116 1% /run/lock
/dev/loop0 102784 102784 0 100% /snap/core/13315
/dev/loop1 50176 50176 0 100% /snap/core18/2406
/dev/loop2 171264 171264 0 100% /snap/flutter/124
/dev/mmcblk0p1 258095 31598 226497 13% /boot
tmpfs 94384 4 94380 1% /run/user/1000

Filename Type Size Used Priority
/var/swap file 102396 0 -2

Package version information

raspberrypi-ui-mods:
Installed: (none)
raspberrypi-sys-mods:
Installed: 20220224
openbox:
Installed: (none)
lxpanel:
Installed: (none)
pcmanfm:
Installed: (none)
rpd-plym-splash:
Installed: (none)

Networking Information

eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet x.x.x.x netmask x.x.x.x
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 12 bytes 1722 (1.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12 bytes 1722 (1.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0
inet6 y::y.y.y.y prefixlen 64 scopeid 0x20
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 16077 bytes 4766829 (4.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 641 bytes 79428 (77.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

USB Information

/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M

config.txt

aphy_params_current=819
arm_64bit=1
arm_freq=1200
arm_freq_min=600
audio_pwm_mode=514
camera_auto_detect=1
config_hdmi_boost=5
core_freq=400
desired_osc_freq=0x387520
disable_commandline_tags=2
disable_l2cache=1
disable_overscan=1
display_auto_detect=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dphy_params_current=547
dvfs=3
enable_tvout=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=300
init_uart_clock=0x2dc6c00
lcd_framerate=60
max_framebuffers=2
over_voltage_avs=43750
pause_burst_frames=1
program_serial_random=1
sdram_freq=450
total_mem=1024
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x9a7ec80
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt

coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=504e9020-02 rootfstype=ext4 fsck.repair=yes rootwait

raspi-gpio settings

BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT
GPIO 1: level=1 fsel=0 func=INPUT
GPIO 2: level=1 fsel=0 func=INPUT
GPIO 3: level=1 fsel=0 func=INPUT
GPIO 4: level=1 fsel=0 func=INPUT
GPIO 5: level=1 fsel=0 func=INPUT
GPIO 6: level=1 fsel=0 func=INPUT
GPIO 7: level=1 fsel=0 func=INPUT
GPIO 8: level=1 fsel=0 func=INPUT
GPIO 9: level=0 fsel=0 func=INPUT
GPIO 10: level=0 fsel=0 func=INPUT
GPIO 11: level=0 fsel=0 func=INPUT
GPIO 12: level=0 fsel=0 func=INPUT
GPIO 13: level=0 fsel=0 func=INPUT
GPIO 14: level=0 fsel=0 func=INPUT
GPIO 15: level=1 fsel=0 func=INPUT
GPIO 16: level=0 fsel=0 func=INPUT
GPIO 17: level=0 fsel=0 func=INPUT
GPIO 18: level=0 fsel=0 func=INPUT
GPIO 19: level=0 fsel=0 func=INPUT
GPIO 20: level=0 fsel=0 func=INPUT
GPIO 21: level=0 fsel=0 func=INPUT
GPIO 22: level=0 fsel=0 func=INPUT
GPIO 23: level=0 fsel=0 func=INPUT
GPIO 24: level=0 fsel=0 func=INPUT
GPIO 25: level=0 fsel=0 func=INPUT
GPIO 26: level=0 fsel=0 func=INPUT
GPIO 27: level=0 fsel=0 func=INPUT
BANK1 (GPIO 28 to 45):
GPIO 28: level=0 fsel=0 func=INPUT
GPIO 29: level=1 fsel=0 func=INPUT
GPIO 30: level=0 fsel=0 func=INPUT
GPIO 31: level=0 fsel=0 func=INPUT
GPIO 32: level=1 fsel=7 alt=3 func=TXD0
GPIO 33: level=1 fsel=7 alt=3 func=RXD0
GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3
GPIO 40: level=0 fsel=4 alt=0 func=PWM0
GPIO 41: level=0 fsel=4 alt=0 func=PWM1
GPIO 42: level=1 fsel=4 alt=0 func=GPCLK1
GPIO 43: level=1 fsel=4 alt=0 func=GPCLK2
GPIO 44: level=1 fsel=0 func=INPUT
GPIO 45: level=1 fsel=0 func=INPUT
BANK2 (GPIO 46 to 53):
GPIO 46: level=1 fsel=0 func=INPUT
GPIO 47: level=1 fsel=1 func=OUTPUT
GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK
GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD
GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0
GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1
GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2
GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3

vcdbg log messages

sudo: vcdbg: command not found

dmesg log

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.32-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022
[ 0.000000] random: fast init done
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000038000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003bffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003bffffff]
[ 0.000000] percpu: Embedded 28 pages/cpu s77144 r8192 d29352 u114688
[ 0.000000] pcpu-alloc: s77144 r8192 d29352 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 241920
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=504e9020-02 rootfstype=ext4 fsck.repair=yes rootwait
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 874548K/983040K available (11456K kernel code, 1962K rwdata, 4144K rodata, 3776K init, 964K bss, 42956K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 37889 entries in 149 pages
[ 0.000000] ftrace: allocated 149 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
[ 0.000000] random: get_random_bytes called from start_kernel+0x510/0x6f8 with crng_init=1
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000307] Console: colour dummy device 80x25
[ 0.001208] printk: console [tty1] enabled
[ 0.001292] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001357] pid_max: default: 32768 minimum: 301
[ 0.001565] LSM: Security Framework initializing
[ 0.001784] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.001853] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.003554] cgroup: Disabling memory control group subsystem
[ 0.007082] rcu: Hierarchical SRCU implementation.
[ 0.008587] EFI services will not be available.
[ 0.009389] smp: Bringing up secondary CPUs ...
[ 0.010907] Detected VIPT I-cache on CPU1
[ 0.010998] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.012823] Detected VIPT I-cache on CPU2
[ 0.012887] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.014533] Detected VIPT I-cache on CPU3
[ 0.014590] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.014796] smp: Brought up 1 node, 4 CPUs
[ 0.014954] SMP: Total of 4 processors activated.
[ 0.014989] CPU features: detected: 32-bit EL0 Support
[ 0.015021] CPU features: detected: 32-bit EL1 Support
[ 0.015056] CPU features: detected: CRC32 instructions
[ 0.054754] CPU: All CPU(s) started at EL2
[ 0.054897] alternatives: patching kernel code
[ 0.056891] devtmpfs: initialized
[ 0.078373] Enabled cp15_barrier support
[ 0.078455] Enabled setend support
[ 0.078771] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.078843] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.082933] pinctrl core: initialized pinctrl subsystem
[ 0.084137] DMI not present or invalid.
[ 0.084875] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.095731] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.096277] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.097795] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.097984] audit: initializing netlink subsys (disabled)
[ 0.098456] audit: type=2000 audit(0.096:1): state=initialized audit_enabled=0 res=1
[ 0.099282] thermal_sys: Registered thermal governor 'step_wise'
[ 0.099609] cpuidle: using governor menu
[ 0.100168] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.100518] ASID allocator initialised with 65536 entries
[ 0.100792] Serial: AMBA PL011 UART driver
[ 0.112020] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.132652] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-03-24T13:20:54, variant start
[ 0.136677] raspberrypi-firmware soc:firmware: Firmware hash is e5a963efa66a1974127860b42e913d2374139ff5
[ 0.194696] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.200148] vgaarb: loaded
[ 0.200830] SCSI subsystem initialized
[ 0.201229] usbcore: registered new interface driver usbfs
[ 0.201344] usbcore: registered new interface driver hub
[ 0.201463] usbcore: registered new device driver usb
[ 0.201943] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.202602] pps_core: LinuxPPS API ver. 1 registered
[ 0.202639] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.202703] PTP clock support registered
[ 0.204905] clocksource: Switched to clocksource arch_sys_counter
[ 0.333595] VFS: Disk quotas dquot_6.6.0
[ 0.333774] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.334045] FS-Cache: Loaded
[ 0.334349] CacheFiles: Loaded
[ 0.347727] NET: Registered PF_INET protocol family
[ 0.348096] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.350109] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.350197] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.350351] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.350581] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.350890] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.350977] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.351367] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.352635] RPC: Registered named UNIX socket transport module.
[ 0.352678] RPC: Registered udp transport module.
[ 0.352711] RPC: Registered tcp transport module.
[ 0.352744] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.352792] PCI: CLS 0 bytes, default 64
[ 0.355589] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.355952] kvm [1]: IPA Size Limit: 40 bits
[ 0.357737] kvm [1]: Hyp mode initialized successfully
[ 1.863499] Initialise system trusted keyrings
[ 1.864046] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 1.874790] zbud: loaded
[ 1.877499] FS-Cache: Netfs 'nfs' registered for caching
[ 1.878545] NFS: Registering the id_resolver key type
[ 1.878640] Key type id_resolver registered
[ 1.878674] Key type id_legacy registered
[ 1.878862] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.878903] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.880573] Key type asymmetric registered
[ 1.880612] Asymmetric key parser 'x509' registered
[ 1.880756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.881228] io scheduler mq-deadline registered
[ 1.881269] io scheduler kyber registered
[ 1.889458] bcm2708_fb soc:fb: FB found 1 display(s)
[ 1.973091] Console: switching to colour frame buffer device 240x67
[ 2.007342] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
[ 2.016172] bcm2835-rng 3f104000.rng: hwrng registered
[ 2.017318] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 2.019369] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 2.020189] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.038014] brd: module loaded
[ 2.053295] loop: module loaded
[ 2.054344] Loading iSCSI transport class v2.0-870.
[ 2.061502] usbcore: registered new interface driver r8152
[ 2.061816] usbcore: registered new interface driver lan78xx
[ 2.062069] usbcore: registered new interface driver smsc95xx
[ 2.062804] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.791625] Core Release: 2.80a
[ 2.791756] Setting default values for core params
[ 2.791936] Finished setting default values for core params
[ 2.992575] Using Buffer DMA mode
[ 2.992699] Periodic Transfer Interrupt Enhancement - disabled
[ 2.992909] Multiprocessor Interrupt Enhancement - disabled
[ 2.993091] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.993245] Dedicated Tx FIFOs mode

[ 2.994052] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = ffffffc009a51000 dma = 0x00000000f8410000 len=9024
[ 2.994468] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 2.995095] dwc_otg: Microframe scheduler enabled

[ 2.995166] WARN::hcd_init_fiq:497: MPHI regs_base at ffffffc009635000
[ 2.995503] dwc_otg 3f980000.usb: DWC OTG Controller
[ 2.995690] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 2.995963] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
[ 2.996193] Init: Port Power? op_state=1
[ 2.996328] Init: Power Port (0)
[ 2.997030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 2.997298] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.997530] usb usb1: Product: DWC OTG Controller
[ 3.005277] usb usb1: Manufacturer: Linux 5.15.32-v8+ dwc_otg_hcd
[ 3.013024] usb usb1: SerialNumber: 3f980000.usb
[ 3.021767] hub 1-0:1.0: USB hub found
[ 3.029450] hub 1-0:1.0: 1 port detected
[ 3.038171] dwc_otg: FIQ enabled
[ 3.038190] dwc_otg: NAK holdoff enabled
[ 3.038205] dwc_otg: FIQ split-transaction FSM enabled
[ 3.038228] Module dwc_common_port init
[ 3.039082] usbcore: registered new interface driver uas
[ 3.047011] usbcore: registered new interface driver usb-storage
[ 3.054906] mousedev: PS/2 mouse device common for all mice
[ 3.067605] sdhci: Secure Digital Host Controller Interface driver
[ 3.075210] sdhci: Copyright(c) Pierre Ossman
[ 3.083316] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.094870] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.103439] hid: raw HID events driver (C) Jiri Kosina
[ 3.111213] usbcore: registered new interface driver usbhid
[ 3.118786] usbhid: USB HID core driver
[ 3.126785] ashmem: initialized
[ 3.142839] Initializing XFRM netlink socket
[ 3.150636] Indeed it is in host mode hprt0 = 00021501
[ 3.160955] NET: Registered PF_PACKET protocol family
[ 3.168532] Key type dns_resolver registered
[ 3.194796] registered taskstats version 1
[ 3.202104] Loading compiled-in X.509 certificates
[ 3.229476] Key type ._fscrypt registered
[ 3.236814] Key type .fscrypt registered
[ 3.244066] Key type fscrypt-provisioning registered
[ 3.272568] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 3.280162] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
[ 3.294191] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 3.302388] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 3.312863] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 3.320221] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 3.354769] sdhost: log_buf @ (ptrval) (c2b49000)
[ 3.376945] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.384627] Indeed it is in host mode hprt0 = 00001101
[ 3.438771] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 3.451064] of_cfs_init
[ 3.459045] of_cfs_init: OK
[ 3.468223] Waiting for root device PARTUUID=504e9020-02...
[ 3.480974] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.490657] mmc0: Problem switching card into high-speed mode!
[ 3.500100] mmc0: new SDXC card at address 0001
[ 3.509995] mmcblk0: mmc0:0001 SD64G 58.2 GiB
[ 3.524508] mmcblk0: p1 p2
[ 3.533166] mmcblk0: mmc0:0001 SD64G 58.2 GiB
[ 3.572965] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 3.580775] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 3.601600] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 3.609480] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.618620] hub 1-1:1.0: USB hub found
[ 3.626397] hub 1-1:1.0: 5 ports detected
[ 3.642921] mmc1: new high speed SDIO card at address 0001
[ 3.703580] EXT4-fs (mmcblk0p2): recovery complete
[ 3.720373] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 3.728237] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 3.748400] devtmpfs: mounted
[ 3.768041] Freeing unused kernel memory: 3776K
[ 3.775987] Run /sbin/init as init process
[ 3.783513] with arguments:
[ 3.783528] /sbin/init
[ 3.783543] with environment:
[ 3.783556] HOME=/
[ 3.783569] TERM=linux
[ 3.920968] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 4.033605] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 4.041658] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.052740] smsc95xx v2.0.0
[ 4.568251] random: crng init done
[ 5.030193] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=POLL)
[ 5.039591] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, m.m.m.m
[ 5.078654] systemd[1]: System time before build time, advancing clock.
[ 5.260828] NET: Registered PF_INET6 protocol family
[ 5.271822] Segment Routing with IPv6
[ 5.280075] In-situ OAM (IOAM) with IPv6
[ 5.373417] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 5.392757] systemd[1]: Detected architecture arm64.
[ 5.448782] systemd[1]: Set hostname to .
[ 6.976359] systemd[1]: Queued start job for default target Multi-User System.
[ 6.993755] systemd[1]: Created slice system-getty.slice.
[ 7.015158] systemd[1]: Created slice system-modprobe.slice.
[ 7.036205] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.057127] systemd[1]: Created slice User and Session Slice.
[ 7.077363] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.097865] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.119737] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.140414] systemd[1]: Reached target Local Encrypted Volumes.
[ 7.161093] systemd[1]: Reached target Paths.
[ 7.181476] systemd[1]: Reached target Slices.
[ 7.201719] systemd[1]: Reached target Swap.
[ 7.237527] systemd[1]: Listening on Syslog Socket.
[ 7.259485] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.280597] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 7.303321] systemd[1]: Listening on Journal Audit Socket.
[ 7.325614] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.348114] systemd[1]: Listening on Journal Socket.
[ 7.372715] systemd[1]: Listening on udev Control Socket.
[ 7.395302] systemd[1]: Listening on udev Kernel Socket.
[ 7.417857] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 7.434410] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.463329] systemd[1]: Mounting RPC Pipe File System...
[ 7.493276] systemd[1]: Mounting Kernel Debug File System...
[ 7.522522] systemd[1]: Mounting Kernel Trace File System...
[ 7.545292] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 7.566382] systemd[1]: Starting Restore / save the current clock...
[ 7.657491] systemd[1]: Starting Set the console keyboard layout...
[ 7.687760] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 7.718172] systemd[1]: Starting Load Kernel Module configfs...
[ 7.750368] systemd[1]: Starting Load Kernel Module drm...
[ 7.781580] systemd[1]: Starting Load Kernel Module fuse...
[ 7.819327] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 7.836406] systemd[1]: Starting File System Check on Root Device...
[ 7.872257] systemd[1]: Starting Journal Service...
[ 7.912797] fuse: init (API version 7.34)
[ 7.971332] systemd[1]: Starting Load Kernel Modules...
[ 8.001867] systemd[1]: Starting Coldplug All udev Devices...
[ 8.064265] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.089346] systemd[1]: Mounted RPC Pipe File System.
[ 8.111769] systemd[1]: Mounted Kernel Debug File System.
[ 8.132784] systemd[1]: Mounted Kernel Trace File System.
[ 8.156432] systemd[1]: Finished Restore / save the current clock.
[ 8.181577] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 8.234249] systemd[1]: modprobe@configfs.service: Succeeded.
[ 8.246983] systemd[1]: Finished Load Kernel Module configfs.
[ 8.271960] systemd[1]: modprobe@drm.service: Succeeded.
[ 8.285249] systemd[1]: Finished Load Kernel Module drm.
[ 8.308173] systemd[1]: Started Journal Service.
[ 8.902743] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[ 9.011217] systemd-journald[144]: Received client request to flush runtime journal.
[ 9.101456] systemd-journald[144]: File /var/log/journal/1ee4e1ce06fe4694acbfea0e8e1a458c/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 9.822101] loop0: detected capacity change from 0 to 205568
[ 9.850342] loop1: detected capacity change from 0 to 100352
[ 9.875953] loop2: detected capacity change from 0 to 342344
[ 9.883619] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 10.914839] mc: Linux media interface: v0.10
[ 10.975970] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.983558] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 10.983632] [vc_sm_connected_init]: start
[ 10.993662] [vc_sm_connected_init]: installed successfully
[ 11.007576] videodev: Linux video capture interface: v2.00
[ 11.106921] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.108106] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.125827] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.130492] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.135346] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.145216] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.155211] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 11.158143] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 11.158953] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 11.159057] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 11.159081] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 11.159781] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 11.160381] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 11.160457] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 11.160497] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 11.160529] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 11.160557] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 11.169837] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 11.169877] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 11.169961] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 11.170686] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 11.171303] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 11.171742] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 11.171790] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 11.171843] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 11.171872] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 11.171901] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 11.172756] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 11.176359] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 11.176440] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 11.180745] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 11.180828] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 11.182462] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 11.185211] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 11.185334] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 11.783484] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.844709] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.132031] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 12.157997] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 12.183301] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 12.184625] usbcore: registered new interface driver brcmfmac
[ 12.259594] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.bin failed with error -2
[ 12.581085] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 12.581365] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 12.603920] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897
[ 16.302931] uart-pl011 3f201000.serial: no DMA platform data
[ 16.652752] 8021q: 802.1Q VLAN Support v1.8
[ 16.831672] Adding 102396k swap on /var/swap. Priority:-2 extents:3 across:126976k SSFS
[ 17.846335] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 18.304077] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 18.457980] smsc95xx 1-1.1:1.0 eth0: Link is Down
[ 19.245398] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 19.333135] hwmon hwmon1: Undervoltage detected!
[ 21.790198] Bluetooth: Core ver 2.22
[ 21.791486] NET: Registered PF_BLUETOOTH protocol family
[ 21.791520] Bluetooth: HCI device and connection manager initialized
[ 21.791581] Bluetooth: HCI socket layer initialized
[ 21.791611] Bluetooth: L2CAP socket layer initialized
[ 21.791671] Bluetooth: SCO socket layer initialized
[ 21.819804] Bluetooth: HCI UART driver ver 2.3
[ 21.819859] Bluetooth: HCI UART protocol H4 registered
[ 21.821315] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 21.828045] Bluetooth: HCI UART protocol Broadcom registered
[ 22.636531] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
[ 23.346723] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.346754] Bluetooth: BNEP filters: protocol multicast
[ 23.346779] Bluetooth: BNEP socket layer initialized
[ 23.378790] NET: Registered PF_ALG protocol family
[ 23.562208] loop3: detected capacity change from 0 to 8
[ 25.381009] hwmon hwmon1: Voltage normalised
[ 33.764975] cam-dummy-reg: disabling

[ardera]

Thx, I'll compare that to what it says on my pi

What does ls /dev/dri output for you?

[drowsell]

I looks like that folder does not exist for me:

ls: cannot access '/dev/dri': No such file or directory

[ardera]

what display are you using?

can you send me the contents of your /boot/config.txt?

[drowsell]

I am just using a regular HDMI monitor. I am waiting for a touchscreen to ship. Will this not even load without a touch screen? That could be the issue.

# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details

# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16

# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1

# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800

# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Uncomment this to enable infrared communication.
#dtoverlay=gpio-ir,gpio_pin=17
#dtoverlay=gpio-ir-tx,gpio_pin=18

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
dtparam=audio=on

# Automatically load overlays for detected cameras
camera_auto_detect=1

# Automatically load overlays for detected DSI displays
display_auto_detect=1

# Enable DRM VC4 V3D driver
#dtoverlay=vc4-kms-v3d
max_framebuffers=2

# Run in 64-bit mode
arm_64bit=1

# Disable compensation for displays with overscan
disable_overscan=1

[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1

[all]

[pi4]
# Run as fast as firmware / board allows
arm_boost=1

[all]
gpu_mem=64

[ardera]

It seems like you have the graphics driver disabled:

...
#dtoverlay=vc4-kms-v3d
...

if you remove the # at the start, it should work.

If it doesn't work, change it to vc4-fkms-v3d

I am waiting for a touchscreen to ship. Will this not even load without a touch screen?

Yep it will, that shouldn't be a problem.

EDIT: My bad, this is configured by one of the instructions in the flutter-pi readme, but I wrote that you can skip this if you're on bullseye. Apparently you can only skip it if you're on bullseye and using a Raspberry Pi 4.

[drowsell]

Thank-you so much! This is now working for me.