Adafruit funhouse

.github/workflows/build.yml

@@ -445,6 +445,7 @@ jobs:
         board:
         - "adafruit_feather_esp32s2_nopsram"
         - "adafruit_feather_esp32s2_tftback_nopsram"
+        - "adafruit_funhouse"
         - "adafruit_magtag_2.9_grayscale"
         - "adafruit_metro_esp32s2"
         - "electroniccats_bastwifi"

.gitignore

@@ -86,3 +86,6 @@ TAGS
 ####################
 .venv
 .env
+
+# Uncrustify formatting
+*.uncrustify

locale/circuitpython.pot

@@ -338,6 +338,10 @@ msgstr ""
 msgid "All UART peripherals are in use"
 msgstr ""
 
+#: shared-bindings/pwmio/PWMOut.c
+msgid "All channels in use"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
 msgstr ""
@@ -667,7 +671,7 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
 
@@ -749,14 +753,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
 #: ports/stm/common-hal/pwmio/PWMOut.c
 msgid "Could not re-init channel"
 msgstr ""
@@ -777,7 +773,7 @@ msgstr ""
 msgid "Could not set address"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Could not start PWM"
 msgstr ""
 
@@ -1026,7 +1022,7 @@ msgstr ""
 msgid "Framebuffer requires %d bytes"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
+#: shared-bindings/pwmio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
 msgstr ""
 
@@ -1254,10 +1250,6 @@ msgstr ""
 msgid "Invalid frequency"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1303,10 +1295,6 @@ msgstr ""
 msgid "Invalid pins"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
@@ -1559,18 +1547,6 @@ msgstr ""
 msgid "No long integer support"
 msgstr ""
 
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more channels available"
-msgstr ""
-
-#: ports/esp32s2/common-hal/pwmio/PWMOut.c
-msgid "No more timers available"
-msgstr ""
-
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-bindings/wifi/Radio.c
 msgid "No network with that ssid"
 msgstr ""
@@ -2124,11 +2100,6 @@ msgstr ""
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
 msgstr ""
 
-#: ports/stm/common-hal/pwmio/PWMOut.c
-msgid ""
-"Timer was reserved for internal use - declare PWM pins earlier in the program"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "To exit, please reset the board without "
 msgstr ""
@@ -3737,6 +3708,7 @@ msgstr ""
 
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h
+#: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h

ports/esp32s2/boards/adafruit_funhouse/board.c

@@ -0,0 +1,123 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+
+#include "shared-bindings/busio/SPI.h"
+#include "shared-bindings/displayio/FourWire.h"
+#include "shared-bindings/microcontroller/Pin.h"
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+
+#include "esp_log.h"
+
+displayio_fourwire_obj_t board_display_obj;
+
+#define DELAY 0x80
+
+uint8_t display_init_sequence[] = {
+    0x01, 0 | DELAY, 150, // SWRESET
+    0x11, 0 | DELAY, 255, // SLPOUT
+    0x36, 1, 0b10100000,  // _MADCTL for rotation 0
+    0x3a, 1, 0x55, // COLMOD - 16bit color
+    0x21, 0 | DELAY, 10,                 // _INVON
+    0x13, 0 | DELAY, 10,                 // _NORON
+    0x29, 0 | DELAY, 255,                // _DISPON
+};
+
+void board_init(void) {
+    // USB
+    common_hal_never_reset_pin(&pin_GPIO19);
+    common_hal_never_reset_pin(&pin_GPIO20);
+
+    // Debug UART
+#ifdef DEBUG
+    common_hal_never_reset_pin(&pin_GPIO37);
+    common_hal_never_reset_pin(&pin_GPIO38);
+#endif /* DEBUG */
+
+    busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus;
+    common_hal_busio_spi_construct(spi, &pin_GPIO36, &pin_GPIO35, NULL);
+    common_hal_busio_spi_never_reset(spi);
+
+    displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus;
+    bus->base.type = &displayio_fourwire_type;
+    common_hal_displayio_fourwire_construct(bus,
+        spi,
+        &pin_GPIO39, // TFT_DC Command or data
+        &pin_GPIO40, // TFT_CS Chip select
+        &pin_GPIO41, // TFT_RESET Reset
+        60000000, // Baudrate
+        0, // Polarity
+        0); // Phase
+
+    // workaround as board_init() is called before reset_port() in main.c
+    pwmout_reset();
+
+    displayio_display_obj_t* display = &displays[0].display;
+    display->base.type = &displayio_display_type;
+    common_hal_displayio_display_construct(
+        display,
+        bus,
+        240, // Width (after rotation)
+        240, // Height (after rotation)
+        80, // column start
+        0, // row start
+        270, // rotation
+        16, // Color depth
+        false, // Grayscale
+        false, // Pixels in a byte share a row. Only used for depth < 8
+        1, // bytes per cell. Only valid for depths < 8
+        false, // reverse_pixels_in_byte. Only valid for depths < 8
+        true, // reverse_pixels_in_word
+        MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
+        MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
+        MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
+        0x37, // set vertical scroll command
+        display_init_sequence,
+        sizeof(display_init_sequence),
+        &pin_GPIO21,  // backlight pin
+        NO_BRIGHTNESS_COMMAND,
+        1.0f, // brightness (ignored)
+        true, // auto_brightness
+        false, // single_byte_bounds
+        false, // data_as_commands
+        true, // auto_refresh
+        60, // native_frames_per_second
+        true, // backlight_on_high
+        false); // not SH1107
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}
+
+void board_deinit(void) {
+}

ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h

@@ -0,0 +1,42 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+//Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Adafruit FunHome"
+#define MICROPY_HW_MCU_NAME         "ESP32S2"
+
+#define MICROPY_HW_APA_MOSI (&pin_GPIO14)
+#define MICROPY_HW_APA_SCK (&pin_GPIO15)
+
+#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
+
+#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
+
+#define AUTORESET_DELAY_MS 500
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO33)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO34)

ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.mk

@@ -0,0 +1,17 @@
+USB_VID = 0x239A
+USB_PID = 0x80FA
+USB_PRODUCT = "FunHouse"
+USB_MANUFACTURER = "Adafruit"
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+# The default queue depth of 16 overflows on release builds,
+# so increase it to 32.
+CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
+
+CIRCUITPY_ESP_FLASH_MODE=dio
+CIRCUITPY_ESP_FLASH_FREQ=40m
+CIRCUITPY_ESP_FLASH_SIZE=4MB
+
+CIRCUITPY_MODULE=wrover

ports/esp32s2/boards/adafruit_funhouse/pins.c

@@ -0,0 +1,51 @@
+#include "shared-bindings/board/__init__.h"
+
+#include "shared-module/displayio/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+
+    { MP_ROM_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_MOSI), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_TFT_SCK), MP_ROM_PTR(&pin_GPIO36) },
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON_DOWN), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON_SELECT), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_BUTTON_UP), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_CAP6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_CAP7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_CAP8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_CAP9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_CAP10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_CAP11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_CAP12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_CAP13), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_DOTSTAR_DATA), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_DOTSTAR_CLOCK), MP_ROM_PTR(&pin_GPIO15) },
+
+    { MP_ROM_QSTR(MP_QSTR_PIR_SENSE), MP_ROM_PTR(&pin_GPIO16) },
+
+    { MP_ROM_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_GPIO42) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO37) },
+
+    { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO1) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO34) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_DEBUG_TX), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_DEBUG_RX), MP_ROM_PTR(&pin_GPIO38) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)},
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

ports/esp32s2/boards/adafruit_funhouse/sdkconfig

@@ -0,0 +1,33 @@
+CONFIG_ESP32S2_SPIRAM_SUPPORT=y
+
+#
+# SPI RAM config
+#
+# CONFIG_SPIRAM_TYPE_AUTO is not set
+CONFIG_SPIRAM_TYPE_ESPPSRAM16=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
+CONFIG_SPIRAM_SIZE=2097152
+
+#
+# PSRAM clock and cs IO for ESP32S2
+#
+CONFIG_DEFAULT_PSRAM_CLK_IO=30
+CONFIG_DEFAULT_PSRAM_CS_IO=26
+# end of PSRAM clock and cs IO for ESP32S2
+
+# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
+# CONFIG_SPIRAM_RODATA is not set
+# CONFIG_SPIRAM_SPEED_80M is not set
+CONFIG_SPIRAM_SPEED_40M=y
+# CONFIG_SPIRAM_SPEED_26M is not set
+# CONFIG_SPIRAM_SPEED_20M is not set
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_BOOT_INIT=y
+# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
+CONFIG_SPIRAM_USE_MEMMAP=y
+# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
+# CONFIG_SPIRAM_USE_MALLOC is not set
+CONFIG_SPIRAM_MEMTEST=y
+# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
+# end of SPI RAM config