Unidentified device, but has a definition config/fibaro/fgwd111.xml

[craigrallen]

A device is included as an unknown device, but has an Open-Zwave definition file as per issue #1873

I've included a device, but it is not identified. Also tried rediscovering the device with (Refresh Node Info). The unit is a Fibaro Walli Dimmer, but when including it doesn't identify and shows some of the Home Assistant devices, one comes up as a water sensor, but the device is a light switch without a water sensor.

I am using Home Assistant on a Raspberry Pi and not sure where to look for the definition files for zwave2mqtt. The version of HassOS is v3.8, Home Assistant is v0.103.6 and zwave2mqtt is v2.0.6.

How can I force identification and access the correct additional configuration parameters?

OpenZWave Error, Node017, ERROR: Dropping command, expected response not received after 1 attempt(s)
OpenZWave Detail, Node017, Removing current message
OpenZWave Detail, Node017, Notification: Notification - TimeOut
OpenZWave Detail,
OpenZWave Info, Node017, Sending (Query) message (Callback ID=0x1b, Expected Reply=0x04) - PowerlevelCmd_Get (Node=17): 0x01, 0x09, 0x00, 0x13, 0x11, 0x02, 0x73, 0x02, 0x25, 0x1b, 0xb9
OpenZWave Detail, Node017, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
OpenZWave Detail, Node017, ZW_SEND_DATA delivered to Z-Wave stack
OpenZWave Detail, Node017, Received: 0x01, 0x07, 0x00, 0x13, 0x1b, 0x00, 0x00, 0x07, 0xf7
OpenZWave Detail, Node017, ZW_SEND_DATA Request with callback ID 0x1b received (expected 0x1b)
OpenZWave Info, Node017, Request RTT 70 Average Request RTT 90
OpenZWave Detail, Expected callbackId was received
2020-01-15T18:25:03.816Z z2m:Zwave zwave node 17: changed: 115-1-0:Powerlevel:Normal -> Normal
OpenZWave Detail, Node017, Received: 0x01, 0x0a, 0x00, 0x04, 0x00, 0x11, 0x04, 0x73, 0x03, 0x00, 0x00, 0x94
OpenZWave Detail,
2020-01-15T18:25:03.820Z z2m:Zwave zwave node 17: changed: 115-1-1:Timeout:0 -> 0
OpenZWave Info, Node017, Response RTT 142 Average Response RTT 181
OpenZWave Info, Node017, Received a PowerLevel report: PowerLevel=Normal, Timeout=0
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=list
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Expected reply and command class was received
OpenZWave Detail, Node017, Message transaction complete
OpenZWave Detail,
OpenZWave Detail, Node017, Removing current message
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail,
OpenZWave Info, Node017, Sending (Query) message (Callback ID=0x1c, Expected Reply=0x04) - ProtectionCmd_Get (Node=17): 0x01, 0x09, 0x00, 0x13, 0x11, 0x02, 0x75, 0x02, 0x25, 0x1c, 0xb8
OpenZWave Detail, Node017, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
OpenZWave Detail, Node017, ZW_SEND_DATA delivered to Z-Wave stack
OpenZWave Detail, Node017, Received: 0x01, 0x07, 0x00, 0x13, 0x1c, 0x00, 0x00, 0x10, 0xe7
OpenZWave Detail, Node017, ZW_SEND_DATA Request with callback ID 0x1c received (expected 0x1c)
OpenZWave Info, Node017, Request RTT 161 Average Request RTT 125
OpenZWave Detail, Expected callbackId was received
OpenZWave Detail, Node017, Received: 0x01, 0x0a, 0x00, 0x04, 0x00, 0x11, 0x04, 0x75, 0x03, 0x00, 0x00, 0x92
OpenZWave Detail,
2020-01-15T18:25:04.059Z z2m:Zwave zwave node 17: changed: 117-1-0:Protection:Unprotected -> Unprotected
OpenZWave Info, Node017, Response RTT 236 Average Response RTT 208
OpenZWave Info, Node017, Received a Protection report: Unprotected
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=list
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Expected reply and command class was received
OpenZWave Detail, Node017, Message transaction complete
OpenZWave Detail,
OpenZWave Detail, Node017, Removing current message
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Query Stage Complete (Session)
OpenZWave Detail, Node017, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Dynamic live=1
OpenZWave Detail, Node017, QueryStage_Dynamic
OpenZWave Detail, Node017, Queuing (Send) SwitchMultilevelCmd_Get (Node=17): 0x01, 0x09, 0x00, 0x13, 0x11, 0x02, 0x26, 0x02, 0x25, 0x1d, 0xea
OpenZWave Detail, Node017, Queuing (Send) MeterCmd_Get (Node=17): 0x01, 0x0a, 0x00, 0x13, 0x11, 0x03, 0x32, 0x01, 0x00, 0x25, 0x1e, 0xfc
OpenZWave Detail, Node017, Queuing (Send) MeterCmd_Get (Node=17): 0x01, 0x0a, 0x00, 0x13, 0x11, 0x03, 0x32, 0x01, 0x10, 0x25, 0x1f, 0xed
OpenZWave Info, Node017, CentralScene RequestState: 4
OpenZWave Info, Node017, CentralScene: Not a StaticRequest
OpenZWave Detail, Node017, Queuing (Send) AlarmCmd_Get (Node=17): 0x01, 0x0c, 0x00, 0x13, 0x11, 0x05, 0x71, 0x04, 0x00, 0x08, 0x01, 0x25, 0x20, 0x8d
OpenZWave Detail, Node017, Queuing (Send) AlarmCmd_Get (Node=17): 0x01, 0x0c, 0x00, 0x13, 0x11, 0x05, 0x71, 0x04, 0x00, 0x09, 0x01, 0x25, 0x21, 0x8d
OpenZWave Detail, Node017, Queuing (Query) Query Stage Complete (Dynamic)
OpenZWave Detail,
OpenZWave Info, Node017, Sending (Send) message (Callback ID=0x1d, Expected Reply=0x04) - SwitchMultilevelCmd_Get (Node=17): 0x01, 0x09, 0x00, 0x13, 0x11, 0x02, 0x26, 0x02, 0x25, 0x1d, 0xea
OpenZWave Detail, Node017, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
OpenZWave Detail, Node017, ZW_SEND_DATA delivered to Z-Wave stack
OpenZWave Detail, Node017, Received: 0x01, 0x07, 0x00, 0x13, 0x1d, 0x00, 0x00, 0x14, 0xe2
OpenZWave Detail, Node017, ZW_SEND_DATA Request with callback ID 0x1d received (expected 0x1d)
OpenZWave Info, Node017, Request RTT 210 Average Request RTT 167
OpenZWave Detail, Expected callbackId was received
OpenZWave Detail, Node017, Received: 0x01, 0x0b, 0x00, 0x04, 0x00, 0x11, 0x05, 0x26, 0x03, 0x00, 0x00, 0x00, 0xc1
OpenZWave Detail,
2020-01-15T18:25:04.348Z z2m:Zwave zwave node 17: changed: 38-1-0:Level:0 -> 0
OpenZWave Info, Node017, Response RTT 286 Average Response RTT 247
OpenZWave Info, Node017, Received SwitchMultiLevel report: level=0
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Expected reply and command class was received
OpenZWave Detail, Node017, Message transaction complete
OpenZWave Detail,
OpenZWave Detail, Node017, Removing current message
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail,
OpenZWave Info, Node017, Sending (Send) message (Callback ID=0x1e, Expected Reply=0x04) - MeterCmd_Get (Node=17): 0x01, 0x0a, 0x00, 0x13, 0x11, 0x03, 0x32, 0x01, 0x00, 0x25, 0x1e, 0xfc
OpenZWave Detail, Node017, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
OpenZWave Detail, Node017, ZW_SEND_DATA delivered to Z-Wave stack
OpenZWave Detail, Node017, Received: 0x01, 0x07, 0x00, 0x13, 0x1e, 0x00, 0x00, 0x0c, 0xf9
OpenZWave Detail, Node017, ZW_SEND_DATA Request with callback ID 0x1e received (expected 0x1e)
OpenZWave Info, Node017, Request RTT 132 Average Request RTT 149
OpenZWave Detail, Expected callbackId was received
OpenZWave Detail, Node017, Received: 0x01, 0x14, 0x00, 0x04, 0x00, 0x11, 0x0e, 0x32, 0x02, 0x21, 0x44, 0x00, 0x00, 0x00, 0x74, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd1
2020-01-15T18:25:04.563Z z2m:Zwave zwave node 17: changed: 50-1-32:Exporting:false -> false
2020-01-15T18:25:04.565Z z2m:Zwave zwave node 17: changed: 50-1-0:Energy:1.16 -> 1.16
OpenZWave Detail,
OpenZWave Info, Node017, Response RTT 213 Average Response RTT 230
OpenZWave Detail, Node017, Refreshed Value: old value=false, new value=false, type=bool
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Info, Node017, Received Meter report from node 17: Energy=1.16kWh
OpenZWave Detail, Node017, Refreshed Value: old value=1.16, new value=1.16, type=decimal
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Expected reply and command class was received
OpenZWave Detail, Node017, Message transaction complete
OpenZWave Detail,
OpenZWave Detail, Node017, Removing current message
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail,
OpenZWave Info, Node017, Sending (Send) message (Callback ID=0x1f, Expected Reply=0x04) - MeterCmd_Get (Node=17): 0x01, 0x0a, 0x00, 0x13, 0x11, 0x03, 0x32, 0x01, 0x10, 0x25, 0x1f, 0xed
OpenZWave Detail, Node017, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
OpenZWave Detail, Node017, ZW_SEND_DATA delivered to Z-Wave stack
OpenZWave Detail, Node017, Received: 0x01, 0x07, 0x00, 0x13, 0x1f, 0x00, 0x00, 0x14, 0xe0
OpenZWave Detail, Node017, ZW_SEND_DATA Request with callback ID 0x1f received (expected 0x1f)
OpenZWave Info, Node017, Request RTT 196 Average Request RTT 172
OpenZWave Detail, Expected callbackId was received
2020-01-15T18:25:04.838Z z2m:Zwave zwave node 17: changed: 50-1-32:Exporting:false -> false
2020-01-15T18:25:04.840Z z2m:Zwave zwave node 17: changed: 50-1-8:Power:0.6 -> 0.6
OpenZWave Detail, Node017, Received: 0x01, 0x10, 0x00, 0x04, 0x00, 0x11, 0x0a, 0x32, 0x02, 0x21, 0x32, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0xd5
OpenZWave Detail,
OpenZWave Info, Node017, Response RTT 273 Average Response RTT 251
OpenZWave Detail, Node017, Refreshed Value: old value=false, new value=false, type=bool
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Info, Node017, Received Meter report from node 17: Power=0.6W
OpenZWave Detail, Node017, Refreshed Value: old value=0.6, new value=0.6, type=decimal
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Expected reply and command class was received
OpenZWave Detail, Node017, Message transaction complete
OpenZWave Detail,
OpenZWave Detail, Node017, Removing current message
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail,
OpenZWave Info, Node017, Sending (Send) message (Callback ID=0x20, Expected Reply=0x04) - AlarmCmd_Get (Node=17): 0x01, 0x0c, 0x00, 0x13, 0x11, 0x05, 0x71, 0x04, 0x00, 0x08, 0x01, 0x25, 0x20, 0x8d
OpenZWave Detail, Node017, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
OpenZWave Detail, Node017, ZW_SEND_DATA delivered to Z-Wave stack
OpenZWave Detail, Node017, Received: 0x01, 0x07, 0x00, 0x13, 0x20, 0x00, 0x00, 0x0d, 0xc6
OpenZWave Detail, Node017, ZW_SEND_DATA Request with callback ID 0x20 received (expected 0x20)
OpenZWave Info, Node017, Request RTT 132 Average Request RTT 152
OpenZWave Detail, Expected callbackId was received
2020-01-15T18:25:05.049Z z2m:Zwave zwave node 17: changed: 113-1-0:Alarm Type:0 -> 0
2020-01-15T18:25:05.050Z z2m:Zwave zwave node 17: changed: 113-1-1:Alarm Level:0 -> 0
2020-01-15T18:25:05.054Z z2m:Zwave zwave node 17: changed: 113-1-2:SourceNodeId:0 -> 0
2020-01-15T18:25:05.055Z z2m:Zwave zwave node 17: changed: 113-1-11:Power Management:254 -> 254
OpenZWave Detail, Node017, Received: 0x01, 0x0f, 0x00, 0x04, 0x00, 0x11, 0x09, 0x71, 0x05, 0x00, 0x00, 0x00, 0xff, 0x08, 0xfe, 0x00, 0x91
OpenZWave Detail,
OpenZWave Info, Node017, Response RTT 208 Average Response RTT 229
OpenZWave Info, Node017, Received Alarm report: type=0, level=0, sensorSrcID=0, type:Power Management event:254, status=255
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Refreshed Value: old value=254, new value=254, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Expected reply and command class was received
OpenZWave Detail, Node017, Message transaction complete
OpenZWave Detail,
OpenZWave Detail, Node017, Removing current message
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail,
OpenZWave Info, Node017, Sending (Send) message (Callback ID=0x21, Expected Reply=0x04) - AlarmCmd_Get (Node=17): 0x01, 0x0c, 0x00, 0x13, 0x11, 0x05, 0x71, 0x04, 0x00, 0x09, 0x01, 0x25, 0x21, 0x8d
OpenZWave Detail, Node017, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
OpenZWave Detail, Node017, ZW_SEND_DATA delivered to Z-Wave stack
OpenZWave Detail, Node017, Received: 0x01, 0x07, 0x00, 0x13, 0x21, 0x00, 0x00, 0x0d, 0xc7
OpenZWave Detail, Node017, ZW_SEND_DATA Request with callback ID 0x21 received (expected 0x21)
OpenZWave Info, Node017, Request RTT 133 Average Request RTT 142
OpenZWave Detail, Expected callbackId was received
2020-01-15T18:25:05.261Z z2m:Zwave zwave node 17: changed: 113-1-0:Alarm Type:0 -> 0
2020-01-15T18:25:05.279Z z2m:Zwave zwave node 17: changed: 113-1-1:Alarm Level:0 -> 0
2020-01-15T18:25:05.280Z z2m:Zwave zwave node 17: changed: 113-1-2:SourceNodeId:0 -> 0
2020-01-15T18:25:05.281Z z2m:Zwave zwave node 17: changed: 113-1-12:System:254 -> 254
2020-01-15T18:25:05.286Z z2m:Zwave node 17 ready: FIBARO System - Unknown: type=1c01, id=1000 (Unknown)
OpenZWave Detail, Node017, Received: 0x01, 0x0f, 0x00, 0x04, 0x00, 0x11, 0x09, 0x71, 0x05, 0x00, 0x00, 0x00, 0xff, 0x09, 0xfe, 0x00, 0x90
OpenZWave Detail,
OpenZWave Info, Node017, Response RTT 208 Average Response RTT 218
OpenZWave Info, Node017, Received Alarm report: type=0, level=0, sensorSrcID=0, type:System event:254, status=255
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Refreshed Value: old value=0, new value=0, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Refreshed Value: old value=254, new value=254, type=byte
OpenZWave Detail, Node017, Changes to this value are not verified
OpenZWave Detail, Node017, Expected reply and command class was received
OpenZWave Detail, Node017, Message transaction complete
OpenZWave Detail,
OpenZWave Detail, Node017, Removing current message
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Notification: ValueChanged
OpenZWave Detail, Node017, Query Stage Complete (Dynamic)
OpenZWave Detail, Node017, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Configuration live=1
OpenZWave Detail, Node017, QueryStage_Configuration
OpenZWave Detail, Node017, QueryStage_Complete
OpenZWave Warning, CheckCompletedNodeQueries m_allNodesQueried=0 m_awakeNodesQueried=1
OpenZWave Warning, CheckCompletedNodeQueries all=0, deadFound=0 sleepingOnly=1
OpenZWave Detail, Node017, Notification: NodeQueriesComplete

[robertsLando]

@craigrallen This could happen sometimes when there are errors while scanning, try to call the api 'refresh node info` against the unknown node

[craigrallen]

Hi,

I tried to refresh node a couple of times. I also added a second identical device and it came up as unknown as well.

It seems to be some other issue that the device isn't recognized, because it is now two identical units that are showing unknown.

[robertsLando]

@Fishwaldo

[Fishwaldo]

OZW 1.4 is no longer updated. The config you reference are in 1.6.
@robertsLando could you please drop 1.4 support, or at least make 1.6 the default. This is causing issues all over the place.

[robertsLando]

I wish but If I do this all people using z2m with Ozw 1.4 will have to remove and add back all nodes of their network and maybe someone will stop updating instead of doung this Daniel

…

On 17 Jan 2020, at 06:44, Justin Hammond ***@***.***> wrote:  OZW 1.4 is no longer updated. The config you reference are in 1.6. @robertsLando could you please drop 1.4 support, or at least make 1.6 the default. This is causing issues all over the place. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.

[Fishwaldo]

Then please stop tagging me on 1.4 issues. 1.6 has been out almost 12 months. I'm starting on 1.8 soon. I can't continue to support 1.4 (and it has bugs/issues that have been fixed in 1.6)

Ozw 1.4 will have to remove and add back all nodes of their network

eh? That does not make sense. The network is stored on the stick. If you start ozw 1.6, it will just work with existing nodes. No need to exclude/include devices.

Other things like the discussion around #197 are not forward compatible with 1.6.

[robertsLando]

@Fishwaldo users that have upgraded from 1.4 to 1.6 usually had to recreate the entire network because after the upgrade all devices are sleeping

[craigrallen]

How do I enable ozw 1.6 in the Home Assistant z2m version? I just thought it ran 1.6 as default?

[robertsLando]

@craigrallen If you are using docker switch to latest-dev tag

[craigrallen]

I'm using the standard Home Assistant build of HassOS and community download of z2m through the Home Assistant Lovelace interface, on a raspberry pi. Is this install of z2m in that instance docker based?

[Fishwaldo]

Sleeping devices just need to be woken up. You would have exactly the same experience as restarting OZW 1.4.

As you can see - people are migrating to Z2m expecting OZW 1.6 and they are not getting it. It is frustrating a lot of users over there.

[craigrallen]

I just moved form the home assistant native to z2m to get it to work with devices I saw definition files for. To be honest if can't have it on 1.6, I'll move back to the native version on home assistant because it doesn't require all the extra effort to manage MQTT without any benefits.

[robertsLando]

'm using the standard Home Assistant build of HassOS and community download of z2m through the Home Assistant Lovelace interface, on a raspberry pi. Is this install of z2m in that instance docker based?

@craigrallen I don't know what the Hass Lovelace interface makes you download, I think it downloads this ? That is not maintaned by me, try to update to the latest version 2.1.0 please and let me know

[robertsLando]

As you can see - people are migrating to Z2m expecting OZW 1.6 and they are not getting it. It is frustrating a lot of users over there.

I also got many issues from users updating to 1.6 and saw lot devices not working anymore that is why I hadn't still removed the 1.4 support. Also hass afaik is still using ozw 1.4 am I wrong?