Skip to content

Commit 0f636fc

Browse files
authored
Merge branch 'main' into release_candidate
2 parents a0cc18c + fc75984 commit 0f636fc

6 files changed

+23
-4
lines changed

docs/configure_with_ucenter.md

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -1,4 +1,4 @@
1-
# Configurw with u-center
1+
# Configure with u-center
22

33
Surveyor: ![Feature Partially Supported](img/Icons/YellowDot.png) / Express: ![Feature Partially Supported](img/Icons/YellowDot.png) / Express Plus: ![Feature Partially Supported](img/Icons/YellowDot.png) / Facet: ![Feature Partially Supported](img/Icons/YellowDot.png) / Facet L-Band: ![Feature Partially Supported](img/Icons/YellowDot.png) / Reference Station: ![Feature Partially Supported](img/Icons/YellowDot.png)
44

docs/displays.md

Lines changed: 8 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -14,6 +14,14 @@ Press and hold the power button until the display illuminates to turn on the dev
1414

1515
The device's firmware version is shown during the Power On display.
1616

17+
### Force Power Off
18+
19+
In the event that a device becomes unresponsive, the device can be completely powered off by holding the power button for 10 seconds or more. The force-power-off method is hardware-based and will therefore work regardless of what firmware the device may be running.
20+
21+
![Multiple COM ports shown](img/Serial/SparkFun_RTK_Facet_-_Multiple_COM_Ports.jpg)
22+
23+
If the power state of a device is not known (for example, because a display may be malfunctioning) the device can be connected to USB. If one or more COM ports enumerate, the device is on (shown above). If no COM ports are seen, the device is fully powered off.
24+
1725
## Rover Fix
1826

1927
![Rover with location fix](img/Displays/SparkFun_RTK_Facet_-_Main_Display_Icons.jpg)
Loading

docs/menu_messages.md

Lines changed: 2 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -23,15 +23,15 @@ Because of the large number of configurations possible, we provide a few common
2323

2424
This will turn off all messages and enable the following messages:
2525

26-
* NMEA-GGA, NMEA-SGA, NMEA-GST, NMEA-GSV, NMEA-RMC
26+
* NMEA-GGA, NMEA-GSA, NMEA-GST, NMEA-GSV, NMEA-RMC
2727

2828
These five NMEA sentences are commonly used with SW Maps for general surveying.
2929

3030
## Reset to PPP Logging Defaults (NMEAx5 + RXMx2)
3131

3232
This will turn off all messages and enable the following messages:
3333

34-
* NMEA-GGA, NMEA-SGA, NMEA-GST, NMEA-GSV, NMEA-RMC, RXM-RAWX, RXM-SFRBX
34+
* NMEA-GGA, NMEA-GSA, NMEA-GST, NMEA-GSV, NMEA-RMC, RXM-RAWX, RXM-SFRBX
3535

3636
These seven sentences are commonly used when logging and doing Precise Point Positioning (PPP) or Post Processed Kinematics (PPK). You can read more about PPP [here](https://learn.sparkfun.com/tutorials/how-to-build-a-diy-gnss-reference-station).
3737

docs/permanent_base.md

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -8,7 +8,7 @@ Surveyor: ![Feature Supported](img/Icons/GreenDot.png) / Express: ![Feature Supp
88

99
This section goes into depth on how to gather the data using an RTK product to create a permanent fixed base.
1010

11-
**Note:** The RTK Facet and RTK Facet L-Band are rated IP53 - Protected from limited dust ingress and water spray. As such it is not recommended for permanent outdoor deployment. Use the RTK Surveyor or Express with a fully sealed [TOP106 antenna](https://www.sparkfun.com/products/21801).
11+
**Note:** The RTK Facet and RTK Facet L-Band are rated IP53 - Protected from limited dust ingress and water spray. As such it is not recommended for permanent outdoor deployment. Use the RTK Surveyor or Express placed inside (or protected from the elements) with a fully sealed [TOP106 antenna](https://www.sparkfun.com/products/21801) placed outside with a clear view of the sky.
1212

1313
**Note:** The RTK Express Plus does not support Base mode.
1414

docs/repair.md

Lines changed: 11 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -208,3 +208,14 @@ Taking the Reference Station apart is really easy:
208208

209209
* Slide out the main PCB
210210

211+
## Surveyor
212+
213+
Disassembly of the RTK Surveyor is achieved by removing two Philips head screws and gently lifting the cover.
214+
215+
![Internal Surveyor Switches](img/Repair/RTK_Surveyor_Internal_-_NMEA_Switches.jpg)
216+
217+
Within the RTK Surveyor, two internal slide switches control the flow of NMEA data over Bluetooth and should be in the position shown above. If these switches get moved, the device will fail to correctly push NMEA data over Bluetooth. Placing a bit of tape over the top of the switches can help keep them in place.
218+
219+
220+
221+

0 commit comments

Comments
 (0)