Fix spelling mistakes in comments.

src/etc/emacs/rust-mode-tests.el

@@ -376,7 +376,7 @@ fn bar(   a:int,
           -> int
 { }
 
-fn baz(   a:int,  // shoudl work with a comment here
+fn baz(   a:int,  // should work with a comment here
           b:char)
           -> int
 { }

src/libcollections/btree/map.rs

@@ -41,10 +41,10 @@ use ringbuf::RingBuf;
 /// the BST strategy.
 ///
 /// A B-Tree instead makes each node contain B-1 to 2B-1 elements in a contiguous array. By doing
-/// this, we reduce the number of allocations by a factor of B, and improve cache effeciency in
+/// this, we reduce the number of allocations by a factor of B, and improve cache efficiency in
 /// searches. However, this does mean that searches will have to do *more* comparisons on average.
 /// The precise number of comparisons depends on the node search strategy used. For optimal cache
-/// effeciency, one could search the nodes linearly. For optimal comparisons, one could search
+/// efficiency, one could search the nodes linearly. For optimal comparisons, one could search
 /// the node using binary search. As a compromise, one could also perform a linear search
 /// that initially only checks every i<sup>th</sup> element for some choice of i.
 ///

src/libcollections/btree/node.rs

@@ -53,7 +53,7 @@ pub struct Node<K, V> {
     // hard. For now, we accept this cost in the name of correctness and simplicity.
     //
     // As a compromise, keys and vals could be merged into one Vec<(K, V)>, which would shave
-    // off 3 words, but possibly hurt our cache effeciency during search, which only cares about
+    // off 3 words, but possibly hurt our cache efficiency during search, which only cares about
     // keys. This would also avoid the Zip we use in our iterator implementations. This is
     // probably worth investigating.
     //
@@ -72,7 +72,7 @@ impl<K: Ord, V> Node<K, V> {
     /// `GoDown` will be yielded with the index of the subtree the key must lie in.
     pub fn search(&self, key: &K) -> SearchResult {
         // FIXME(Gankro): Tune when to search linear or binary based on B (and maybe K/V).
-        // For the B configured as of this writing (B = 6), binary search was *singnificantly*
+        // For the B configured as of this writing (B = 6), binary search was *significantly*
         // worse for uints.
         self.search_linear(key)
     }
@@ -375,7 +375,7 @@ impl<K, V> Node<K, V> {
         }
     }
 
-    /// Steal! Stealing is roughly analagous to a binary tree rotation.
+    /// Steal! Stealing is roughly analogous to a binary tree rotation.
     /// In this case, we're "rotating" right.
     unsafe fn steal_to_left(&mut self, underflowed_child_index: uint) {
         // Take the biggest stuff off left
@@ -387,7 +387,7 @@ impl<K, V> Node<K, V> {
             }
         };
 
-        // Swap the parent's seperating key-value pair with left's
+        // Swap the parent's separating key-value pair with left's
         self.unsafe_swap(underflowed_child_index - 1, &mut key, &mut val);
 
         // Put them at the start of right
@@ -402,7 +402,7 @@ impl<K, V> Node<K, V> {
         }
     }
 
-    /// Steal! Stealing is roughly analagous to a binary tree rotation.
+    /// Steal! Stealing is roughly analogous to a binary tree rotation.
     /// In this case, we're "rotating" left.
     unsafe fn steal_to_right(&mut self, underflowed_child_index: uint) {
         // Take the smallest stuff off right
@@ -414,7 +414,7 @@ impl<K, V> Node<K, V> {
             }
         };
 
-        // Swap the parent's seperating key-value pair with right's
+        // Swap the parent's separating key-value pair with right's
         self.unsafe_swap(underflowed_child_index, &mut key, &mut val);
 
         // Put them at the end of left
@@ -430,9 +430,9 @@ impl<K, V> Node<K, V> {
     }
 
     /// Merge! Left and right will be smooshed into one node, along with the key-value
-    /// pair that seperated them in their parent.
+    /// pair that separated them in their parent.
     unsafe fn merge_children(&mut self, left_index: uint) {
-        // Permanently remove right's index, and the key-value pair that seperates
+        // Permanently remove right's index, and the key-value pair that separates
         // left and right
         let (key, val, right) = {
             match (self.keys.remove(left_index),
@@ -448,7 +448,7 @@ impl<K, V> Node<K, V> {
         left.absorb(key, val, right);
     }
 
-    /// Take all the values from right, seperated by the given key and value
+    /// Take all the values from right, separated by the given key and value
     fn absorb(&mut self, key: K, val: V, right: Node<K, V>) {
         // Just as a sanity check, make sure we can fit this guy in
         debug_assert!(self.len() + right.len() <= self.capacity())

src/librand/chacha.rs

@@ -173,7 +173,7 @@ impl<'a> SeedableRng<&'a [u32]> for ChaChaRng {
     fn reseed(&mut self, seed: &'a [u32]) {
         // reset state
         self.init(&[0u32, ..KEY_WORDS]);
-        // set key inplace
+        // set key in place
         let key = self.state.slice_mut(4, 4+KEY_WORDS);
         for (k, s) in key.iter_mut().zip(seed.iter()) {
             *k = *s;

src/librustc/middle/traits/select.rs

@@ -211,7 +211,7 @@ impl<'cx, 'tcx> SelectionContext<'cx, 'tcx> {
     // can be applied to particular types. It skips the "confirmation"
     // step and hence completely ignores output type parameters.
     //
-    // The result is "true" if the obliation *may* hold and "false" if
+    // The result is "true" if the obligation *may* hold and "false" if
     // we can be sure it does not.
 
     pub fn evaluate_obligation_intercrate(&mut self,

src/librustc/middle/trans/expr.rs

@@ -2117,7 +2117,7 @@ fn deref_once<'blk, 'tcx>(bcx: Block<'blk, 'tcx>,
                 deref_owned_pointer(bcx, expr, datum, content_ty)
             } else {
                 // A fat pointer and an opened DST value have the same
-                // represenation just different types. Since there is no
+                // representation just different types. Since there is no
                 // temporary for `*e` here (because it is unsized), we cannot
                 // emulate the sized object code path for running drop glue and
                 // free. Instead, we schedule cleanup for `e`, turning it into
@@ -2142,7 +2142,7 @@ fn deref_once<'blk, 'tcx>(bcx: Block<'blk, 'tcx>,
                 // owner (or, in the case of *T, by the user).
                 DatumBlock::new(bcx, Datum::new(ptr, content_ty, LvalueExpr))
             } else {
-                // A fat pointer and an opened DST value have the same represenation
+                // A fat pointer and an opened DST value have the same representation
                 // just different types.
                 DatumBlock::new(bcx, Datum::new(datum.val,
                                                 ty::mk_open(bcx.tcx(), content_ty),

src/librustc/middle/ty.rs

@@ -3605,7 +3605,7 @@ pub fn expr_kind(tcx: &ctxt, expr: &ast::Expr) -> ExprKind {
 
                 // Special case: A unit like struct's constructor must be called without () at the
                 // end (like `UnitStruct`) which means this is an ExprPath to a DefFn. But in case
-                // of unit structs this is should not be interpretet as function pointer but as
+                // of unit structs this is should not be interpreted as function pointer but as
                 // call to the constructor.
                 def::DefFn(_, _, true) => RvalueDpsExpr,
 
@@ -5409,7 +5409,7 @@ impl BorrowKind {
             MutBorrow => ast::MutMutable,
             ImmBorrow => ast::MutImmutable,
 
-            // We have no type correponding to a unique imm borrow, so
+            // We have no type corresponding to a unique imm borrow, so
             // use `&mut`. It gives all the capabilities of an `&uniq`
             // and hence is a safe "over approximation".
             UniqueImmBorrow => ast::MutMutable,

src/librustc/middle/typeck/check/regionck.rs

@@ -1675,7 +1675,7 @@ fn link_reborrowed_region(rcx: &Rcx,
             //
             // If mutability was inferred from an upvar, we may be
             // forced to revisit this decision later if processing
-            // another borrow or nested closure ends up coverting the
+            // another borrow or nested closure ends up converting the
             // upvar borrow kind to mutable/unique.  Record the
             // information needed to perform the recursive link in the
             // maybe link map.

src/libstd/collections/hashmap/set.rs

@@ -186,7 +186,7 @@ impl<T: Eq + Hash<S>, S, H: Hasher<S>> HashSet<T, H> {
     /// # Example
     ///
     /// This is a slightly silly example where we define the number's
-    /// parity as the equivilance class. It is important that the
+    /// parity as the equivalance class. It is important that the
     /// values hash the same, which is why we implement `Hash`.
     ///
     /// ```

src/libsyntax/ast.rs

@@ -436,7 +436,7 @@ pub enum Stmt_ {
     /// Expr with trailing semi-colon (may have any type):
     StmtSemi(P<Expr>, NodeId),
 
-    /// bool: is there a trailing sem-colon?
+    /// bool: is there a trailing semi-colon?
     StmtMac(Mac, bool),
 }
 

src/test/run-pass/dst-coercions.rs

@@ -28,7 +28,7 @@ pub fn main() {
 
     let x: *mut S = &mut S;
 
-    // Test we can chnage the mutability from mut to const.
+    // Test we can change the mutability from mut to const.
     let x: &T = &mut S;
     let x: *const T = &mut S;
 }

src/test/run-pass/realloc-16687.rs

@@ -30,7 +30,7 @@ unsafe fn test_triangle() -> bool {
     let ascend = ascend.as_mut_slice();
     static ALIGN : uint = 1;
 
-    // Checks that `ascend` forms triangle of acending size formed
+    // Checks that `ascend` forms triangle of ascending size formed
     // from pairs of rows (where each pair of rows is equally sized),
     // and the elements of the triangle match their row-pair index.
     unsafe fn sanity_check(ascend: &[*mut u8]) {

src/test/run-pass/vec-dst.rs

@@ -10,7 +10,7 @@
 
 fn sub_expr() {
     // Test for a &[T] => &&[T] coercion in sub-expression position
-    // (surpisingly, this can cause errors which are not caused by either of:
+    // (surprisingly, this can cause errors which are not caused by either of:
     //    `let x = vec.slice_mut(0, 2);`
     //    `foo(vec.slice_mut(0, 2));` ).
     let mut vec: Vec<int> = vec!(1, 2, 3, 4);