Rustup #9007
Merged
Rustup #9007
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
The fixed issue in this commit can be tested without depending on clap/clap_derive. This updates the test case to do so.
alway -> always
Fix typo in redundant_pattern_match.rs alway -> always
Remove migrate borrowck mode Closes #58781 Closes #43234 # Stabilization proposal This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile. Tracking issue: #43234 RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable). ## Motivation Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors. The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition. In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker. In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver. While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff. ## What is stabilized As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise. There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](rust-lang/rust#95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl. As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions. ## What isn't stabilized This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck. ## Tests Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll` ## History * On 2017-07-14, [tracking issue opened](rust-lang/rust#43234) * On 2017-07-20, [initial empty MIR pass added](rust-lang/rust#43271) * On 2017-08-29, [RFC opened](rust-lang/rfcs#2094) * On 2017-11-16, [Integrate MIR type-checker with NLL](rust-lang/rust#45825) * On 2017-12-20, [NLL feature complete](rust-lang/rust#46862) * On 2018-07-07, [Don't run AST borrowck on mir mode](rust-lang/rust#52083) * On 2018-07-27, [Add migrate mode](rust-lang/rust#52681) * On 2019-04-22, [Enable migrate mode on 2015 edition](rust-lang/rust#59114) * On 2019-08-26, [Don't downgrade errors on 2015 edition](rust-lang/rust#64221) * On 2019-08-27, [Remove AST borrowck](rust-lang/rust#64790)
This commit makes type folding more like the way chalk does it. Currently, `TypeFoldable` has `fold_with` and `super_fold_with` methods. - `fold_with` is the standard entry point, and defaults to calling `super_fold_with`. - `super_fold_with` does the actual work of traversing a type. - For a few types of interest (`Ty`, `Region`, etc.) `fold_with` instead calls into a `TypeFolder`, which can then call back into `super_fold_with`. With the new approach, `TypeFoldable` has `fold_with` and `TypeSuperFoldable` has `super_fold_with`. - `fold_with` is still the standard entry point, *and* it does the actual work of traversing a type, for all types except types of interest. - `super_fold_with` is only implemented for the types of interest. Benefits of the new model. - I find it easier to understand. The distinction between types of interest and other types is clearer, and `super_fold_with` doesn't exist for most types. - With the current model is easy to get confused and implement a `super_fold_with` method that should be left defaulted. (Some of the precursor commits fixed such cases.) - With the current model it's easy to call `super_fold_with` within `TypeFolder` impls where `fold_with` should be called. The new approach makes this mistake impossible, and this commit fixes a number of such cases. - It's potentially faster, because it avoids the `fold_with` -> `super_fold_with` call in all cases except types of interest. A lot of the time the compile would inline those away, but not necessarily always.
And likewise for the `Const::val` method. Because its type is called `ConstKind`. Also `val` is a confusing name because `ConstKind` is an enum with seven variants, one of which is called `Value`. Also, this gives consistency with `TyS` and `PredicateS` which have `kind` fields. The commit also renames a few `Const` variables from `val` to `c`, to avoid confusion with the `ConstKind::Value` variant.
Make `ExprKind::Closure` a struct variant. Simple refactor since we both need it to introduce additional fields in `ExprKind::Closure`. r? ``@Aaron1011``
|
@bors r+ |
|
📌 Commit 280797e has been approved by |
|
☀️ Test successful - checks-action_dev_test, checks-action_remark_test, checks-action_test |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
r? @ghost
changelog: none