Docs: Remove front-matter from outdated pages

phated · phated · commit c5af6f18f553 · 2018-11-02T20:56:05.000-07:00
diff --git a/docs/CLI.md b/docs/CLI.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: cli
-title: CLI
-hide_title: true
-sidebar_label: CLI
--->
-
 ## gulp CLI docs
 
 ### Flags
diff --git a/docs/FAQ.md b/docs/FAQ.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: faq
-title: FAQ
-hide_title: true
-sidebar_label: FAQ
--->
-
 # FAQ
 
 ## Why gulp? Why not ____?
diff --git a/docs/README.md b/docs/README.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: docs
-title: Docs
-hide_title: true
-sidebar_label: Docs
--->
-
 # gulp documentation
 
 * [Getting Started](getting-started/) - Get started with gulp
diff --git a/docs/recipes/README.md b/docs/recipes/README.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: recipes
-title: Recipes
-hide_title: true
-sidebar_label: Recipes
--->
-
 # Recipes
 
 * [Automate release workflow](automate-release-workflow.md)
diff --git a/docs/recipes/automate-release-workflow.md b/docs/recipes/automate-release-workflow.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: automate-release-workflow
-title: Automate Release Workflow
-hide_title: true
-sidebar_label: Automate Release Workflow
--->
-
 # Automate release workflow
 
 If your project follows a semantic versioning, it may be a good idea to automatize the steps needed to do a release.
diff --git a/docs/recipes/browserify-multiple-destination.md b/docs/recipes/browserify-multiple-destination.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: browserify-multiple-destination
-title: Browserify w/ Multiple Destinations
-hide_title: true
-sidebar_label: Browserify w/ Multiple Destinations
--->
-
 # Browserify + Globs (multiple destination)
 
 This example shows how to set up a task of bundling multiple entry points into multiple destinations using browserify.
diff --git a/docs/recipes/browserify-transforms.md b/docs/recipes/browserify-transforms.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: browserify-transforms
-title: Browserify + Transforms
-hide_title: true
-sidebar_label: Browserify + Transforms
--->
-
 # Browserify + Transforms
 
 [Browserify](https://github.com/browserify/browserify) has become an important and indispensable
diff --git a/docs/recipes/browserify-uglify-sourcemap.md b/docs/recipes/browserify-uglify-sourcemap.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: browserify-uglify-sourcemap
-title: Browserify + Uglify2 with Sourcemaps
-hide_title: true
-sidebar_label: Browserify + Uglify2 with Sourcemaps
--->
-
 # Browserify + Uglify2 with sourcemaps
 
 [Browserify](https://github.com/browserify/browserify) has become an important and indispensable
diff --git a/docs/recipes/browserify-with-globs.md b/docs/recipes/browserify-with-globs.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: browserify-with-globs
-title: Browserify + Globs
-hide_title: true
-sidebar_label: Browserify + Globs
--->
-
 # Browserify + Globs
 
 [Browserify + Uglify2](https://github.com/gulpjs/gulp/blob/master/docs/recipes/browserify-uglify-sourcemap.md) shows how to setup a basic gulp task to bundle a JavaScript file with its dependencies, and minify the bundle with UglifyJS while preserving source maps.
diff --git a/docs/recipes/combining-streams-to-handle-errors.md b/docs/recipes/combining-streams-to-handle-errors.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: combining-streams-to-handle-errors
-title: Combining Streams to Handle Errors
-hide_title: true
-sidebar_label: Combining Streams to Handle Errors
--->
-
 # Combining streams to handle errors
 
 By default, emitting an error on a stream will cause it to be thrown unless it already has a listener attached to the `error` event. This gets a bit tricky when you're working with longer pipelines of streams.
diff --git a/docs/recipes/cron-task.md b/docs/recipes/cron-task.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: cron-task
-title: Cron Task
-hide_title: true
-sidebar_label: Cron Task
--->
-
 # Run gulp task via cron job
 
 While logged in via a user that has privileges to run `gulp`, run the following:
diff --git a/docs/recipes/delete-files-folder.md b/docs/recipes/delete-files-folder.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: delete-files-folder
-title: Delete files and folders
-hide_title: true
-sidebar_label: Delete files and folders
--->
-
 # Delete files and folders
 
 You might want to delete some files before running your build. Since deleting files doesn't work on the file contents, there's no reason to use a gulp plugin. An excellent opportunity to use a vanilla node module.
diff --git a/docs/recipes/exports-as-tasks.md b/docs/recipes/exports-as-tasks.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: export-as-tasks
-title: Export as Tasks
-hide_title: true
-sidebar_label: Export as Tasks
--->
-
 # Exports as Tasks
 
 Using the ES2015 module syntax you can use your exports as tasks.
diff --git a/docs/recipes/fast-browserify-builds-with-watchify.md b/docs/recipes/fast-browserify-builds-with-watchify.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: fast-browserify-builds-with-watchify
-title: Fast Browserify builds with Watchify
-hide_title: true
-sidebar_label: Fast Browserify builds with Watchify
--->
-
 # Fast browserify builds with watchify
 
 As a [browserify](https://github.com/browserify/browserify) project begins to expand, the time to bundle it slowly gets longer and longer. While it might start at 1 second, it's possible to be waiting 30 seconds for your project to build on particularly large projects.
diff --git a/docs/recipes/handling-the-delete-event-on-watch.md b/docs/recipes/handling-the-delete-event-on-watch.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: handling-the-delete-event-on-watch
-title: Handling the Delete Event on Watch
-hide_title: true
-sidebar_label: Handling the Delete Event on Watch
--->
-
 # Handling the Delete Event on Watch
 
 You can listen for `'unlink'` events to fire on the watcher returned from `gulp.watch`.
diff --git a/docs/recipes/incremental-builds-with-concatenate.md b/docs/recipes/incremental-builds-with-concatenate.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: incremental-builds-with-concatenate
-title: Incremental Rebuilding
-hide_title: true
-sidebar_label: Incremental Rebuilding
--->
-
 # Incremental rebuilding, including operating on full file sets
 
 The trouble with incremental rebuilds is you often want to operate on _all_ processed files, not just single files. For example, you may want to lint and module-wrap just the file(s) that have changed, then concatenate it with all other linted and module-wrapped files. This is difficult without the use of temp files.
diff --git a/docs/recipes/maintain-directory-structure-while-globbing.md b/docs/recipes/maintain-directory-structure-while-globbing.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: maintain-directory-structure-while-globbing
-title: Maintain Directory Structure while Globbing
-hide_title: true
-sidebar_label: Maintain Directory Structure while Globbing
--->
-
 # Maintain Directory Structure while Globbing
 
 If you are planning to read a few files/folders from a directory and maintain their relative path, you need to pass `{base: '.'}` as the second argument to `gulp.src()`.
diff --git a/docs/recipes/make-stream-from-buffer.md b/docs/recipes/make-stream-from-buffer.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: make-stream-from-buffer
-title: Make Stream from Buffer
-hide_title: true
-sidebar_label: Make Stream from Buffer
--->
-
 # Make stream from buffer (memory contents)
 
 Sometimes you may need to start a stream with files that their contents are in a variable and not in a physical file. In other words, how to start a 'gulp' stream without using `gulp.src()`.
diff --git a/docs/recipes/minified-and-non-minified.md b/docs/recipes/minified-and-non-minified.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: minified-and-non-minified
-title: Outputting Minified and non-minified
-hide_title: true
-sidebar_label: Outputting Minified and non-minified
--->
-
 # Output both a minified and non-minified version
 
 Outputting both a minified and non-minified version of your combined JavaScript files can be achieved by using `gulp-rename` and piping to `dest` twice (once before minifying and once after minifying):
diff --git a/docs/recipes/minimal-browsersync-setup-with-gulp4.md b/docs/recipes/minimal-browsersync-setup-with-gulp4.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: minimal-browsersync-setup-with-gulp4
-title: Minimal BrowserSync setup with Gulp 4
-hide_title: true
-sidebar_label: Minimal BrowserSync setup with Gulp 4
--->
-
 # Minimal BrowserSync setup with Gulp 4
 
 [BrowserSync](https://www.browsersync.io/) is a great tool to streamline
diff --git a/docs/recipes/mocha-test-runner-with-gulp.md b/docs/recipes/mocha-test-runner-with-gulp.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: mocha-test-runner-with-gulp
-title: Mocha test-runner with Gulp
-hide_title: true
-sidebar_label: Mocha test-runner with Gulp
--->
-
 # Mocha test-runner with gulp
 
 ### Passing shared module in all tests
diff --git a/docs/recipes/only-pass-through-changed-files.md b/docs/recipes/only-pass-through-changed-files.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: only-pass-through-changed-files
-title: Only Pass Through Changed Files
-hide_title: true
-sidebar_label: Only Pass Through Changed Files
--->
-
 # Only pass through changed files
 
 Files are passed through the whole pipe chain on every run by default. By using [gulp-changed](https://github.com/sindresorhus/gulp-changed) only changed files will be passed through. This can speed up consecutive runs considerably.
diff --git a/docs/recipes/pass-arguments-from-cli.md b/docs/recipes/pass-arguments-from-cli.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: pass-arguments-from-cli
-title: Pass Arguments from the CLI
-hide_title: true
-sidebar_label: Pass Arguments from the CLI
--->
-
 # Pass arguments from the command line
 
 ```js
diff --git a/docs/recipes/rebuild-only-files-that-change.md b/docs/recipes/rebuild-only-files-that-change.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: rebuild-only-files-that-change
-title: Rebuild only files that Change
-hide_title: true
-sidebar_label: Rebuild only files that Change
--->
-
 # Rebuild only files that change
 
 With [`gulp-watch`](https://github.com/floatdrop/gulp-watch):
diff --git a/docs/recipes/rollup-with-rollup-stream.md b/docs/recipes/rollup-with-rollup-stream.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: rollup-with-rollup-stream
-title: Rollup with Rollup-Stream
-hide_title: true
-sidebar_label: Rollup with Rollup-Stream
--->
-
 # Rollup with rollup-stream
 
 Like Browserify, [Rollup](https://rollupjs.org/) is a bundler and thus only fits naturally into gulp if it's at the start of the pipeline. Unlike Browserify, Rollup doesn't natively produce a stream as output and needs to be wrapped before it can take this position. [rollup-stream](https://github.com/Permutatrix/rollup-stream) does this for you, producing output just like that of Browserify's `bundle()` method&mdash;as a result, most of the Browserify recipes here will also work with rollup-stream.
diff --git a/docs/recipes/run-grunt-tasks-from-gulp.md b/docs/recipes/run-grunt-tasks-from-gulp.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: run-grunt-tasks-from-gulp
-title: Run Grunt Tasks from Gulp
-hide_title: true
-sidebar_label: Run Grunt Tasks from Gulp
--->
-
 # Run Grunt Tasks from Gulp
 
 It is possible to run Grunt tasks / Grunt plugins from within Gulp. This can be useful during a gradual migration from Grunt to Gulp or if there's a specific plugin that you need. With the described approach no Grunt CLI and no Gruntfile is required.
diff --git a/docs/recipes/running-shell-commands.md b/docs/recipes/running-shell-commands.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: running-shell-commands
-title: Running Shell Commands
-hide_title: true
-sidebar_label: Running Shell Commands
--->
-
 # Running Shell Commands
 
 Sometimes it is helpful to be able to call existing command line tools from gulp.
diff --git a/docs/recipes/running-task-steps-per-folder.md b/docs/recipes/running-task-steps-per-folder.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: running-task-steps-per-folder
-title: Generating a file per Folder
-hide_title: true
-sidebar_label: Generating a file per Folder
--->
-
 # Generating a file per folder
 
 If you have a set of folders, and wish to perform a set of tasks on each, for instance...
@@ -53,11 +46,11 @@ gulp.task('scripts', function(done) {
         // write to output
         .pipe(gulp.dest(scriptsPath))
         // minify
-        .pipe(uglify())    
+        .pipe(uglify())
         // rename to folder.min.js
         .pipe(rename(folder + '.min.js'))
         // write to output again
-        .pipe(gulp.dest(scriptsPath));    
+        .pipe(gulp.dest(scriptsPath));
    });
 
    // process all remaining files in scriptsPath root into main.js and main.min.js files
diff --git a/docs/recipes/running-tasks-in-series.md b/docs/recipes/running-tasks-in-series.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: running-tasks-in-series
-title: Running Tasks in Series
-hide_title: true
-sidebar_label: Running Tasks in Series
--->
-
 # Running tasks in series
 
 By default, gulp CLI run tasks with maximum concurrency - e.g. it launches
diff --git a/docs/recipes/server-with-livereload-and-css-injection.md b/docs/recipes/server-with-livereload-and-css-injection.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: server-with-livereload-and-css-inject
-title: Server with Live-Reloading and CSS Injection
-hide_title: true
-sidebar_label: Server with Live-Reloading and CSS Injection
--->
-
 # Server with live-reloading and CSS injection
 
 With [BrowserSync](https://browsersync.io) and gulp, you can easily create a development server that is accessible to any device on the same WiFi network. BrowserSync also has live-reload built in, so there's nothing else to configure.
diff --git a/docs/recipes/sharing-streams-with-stream-factories.md b/docs/recipes/sharing-streams-with-stream-factories.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: sharing-streams-with-stream-factories
-title: Sharing Streams with Stream Factories
-hide_title: true
-sidebar_label: Sharing Streams with Stream Factories
--->
-
 # Sharing streams with stream factories
 
 If you use the same plugins in multiple tasks you might find yourself getting that itch to DRY things up. This method will allow you to create factories to split out your commonly used stream chains.
diff --git a/docs/recipes/specifying-a-cwd.md b/docs/recipes/specifying-a-cwd.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: specifying-a-cwd
-title: Specifying a New cwd
-hide_title: true
-sidebar_label: Specifying a New cwd
--->
-
 # Specifying a new cwd (current working directory)
 
 This is helpful for projects using a nested directory structure, such as:
diff --git a/docs/recipes/split-tasks-across-multiple-files.md b/docs/recipes/split-tasks-across-multiple-files.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: split-tasks-across-multiple-files
-title: Split Tasks Across Multiple Files
-hide_title: true
-sidebar_label: Split Tasks Across Multiple Files
--->
-
 # Split tasks across multiple files
 
 If your `gulpfile.js` is starting to grow too large, you can split the tasks
diff --git a/docs/recipes/templating-with-swig-and-yaml-front-matter.md b/docs/recipes/templating-with-swig-and-yaml-front-matter.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: templating-with-swig-and-yaml-front-matter
-title: Templating with Swig and YAML front-matter
-hide_title: true
-sidebar_label: Templating with Swig and YAML front-matter
--->
-
 # Templating with Swig and YAML front-matter
 Templating can be setup using `gulp-swig` and `gulp-front-matter`:
 
diff --git a/docs/recipes/using-external-config-file.md b/docs/recipes/using-external-config-file.md
@@ -1,10 +1,3 @@
-<!-- front-matter
-id: using-external-config-file
-title: Using External Config File
-hide_title: true
-sidebar_label: Using External Config File
--->
-
 # Using external config file
 
 Beneficial because it's keeping tasks DRY and config.json can be used by another task runner, like `grunt`.
diff --git a/docs/recipes/using-multiple-sources-in-one-task.md b/docs/recipes/using-multiple-sources-in-one-task.md
diff --git a/docs/why-use-pump/README.md b/docs/why-use-pump/README.md
diff --git a/docs/writing-a-plugin/README.md b/docs/writing-a-plugin/README.md
diff --git a/docs/writing-a-plugin/dealing-with-streams.md b/docs/writing-a-plugin/dealing-with-streams.md
diff --git a/docs/writing-a-plugin/guidelines.md b/docs/writing-a-plugin/guidelines.md
diff --git a/docs/writing-a-plugin/recommended-modules.md b/docs/writing-a-plugin/recommended-modules.md
diff --git a/docs/writing-a-plugin/testing.md b/docs/writing-a-plugin/testing.md
diff --git a/docs/writing-a-plugin/using-buffers.md b/docs/writing-a-plugin/using-buffers.md
