ci(pre-commit): Apply automatic fixes

Author: pre-commit-ci-lite[bot]

libraries/Matter/examples/MatterColorLight/MatterColorLight.ino

@@ -38,10 +38,10 @@ const uint8_t ledPin = 2;  // Set your pin here if your board has not defined LE
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t debouceTime = 250;               // button debouncing time (ms)
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t debouceTime = 250;              // button debouncing time (ms)
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // WiFi is manually set and started
 const char *ssid = "your-ssid";          // Change this to your WiFi SSID
@@ -171,7 +171,7 @@ void loop() {
   if (digitalRead(buttonPin) == HIGH && button_state && time_diff > debouceTime) {
     // Toggle button is released - toggle the light
     Serial.println("User button released. Toggling Light!");
-    ColorLight.toggle();  // Matter Controller also can see the change
+    ColorLight.toggle();   // Matter Controller also can see the change
     button_state = false;  // released
   }
 
@@ -180,6 +180,6 @@ void loop() {
     Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
     ColorLight = false;  // turn the light off
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
 }

libraries/Matter/examples/MatterComposedLights/MatterComposedLights.ino

@@ -30,9 +30,9 @@ const char *password = "your-password";  // Change this to your WiFi password
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // Matter Protocol Endpoint Callback for each Light Accessory
 bool setLightOnOff1(bool state) {
@@ -135,7 +135,7 @@ void loop() {
   if (button_state && time_diff > decommissioningTimeout) {
     Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
 
   delay(500);

libraries/Matter/examples/MatterDimmableLight/MatterDimmableLight.ino

@@ -38,10 +38,10 @@ const uint8_t ledPin = 2;  // Set your pin here if your board has not defined LE
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t debouceTime = 250;               // button debouncing time (ms)
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t debouceTime = 250;              // button debouncing time (ms)
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // WiFi is manually set and started
 const char *ssid = "your-ssid";          // Change this to your WiFi SSID
@@ -161,14 +161,14 @@ void loop() {
     // Toggle button is released - toggle the light
     Serial.println("User button released. Toggling Light!");
     DimmableLight.toggle();  // Matter Controller also can see the change
-    button_state = false;  // released
+    button_state = false;    // released
   }
 
   // Onboard User Button is kept pressed for longer than 5 seconds in order to decommission matter node
   if (button_state && time_diff > decommissioningTimeout) {
     Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
     DimmableLight = false;  // turn the light off
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
 }

libraries/Matter/examples/MatterEnhancedColorLight/MatterEnhancedColorLight.ino

@@ -41,10 +41,10 @@ const uint8_t ledPin = 2;  // Set your pin here if your board has not defined LE
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t debouceTime = 250;               // button debouncing time (ms)
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t debouceTime = 250;              // button debouncing time (ms)
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // WiFi is manually set and started
 const char *ssid = "your-ssid";          // Change this to your WiFi SSID
@@ -202,6 +202,6 @@ void loop() {
     Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
     EnhancedColorLight = false;  // turn the light off
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
 }

libraries/Matter/examples/MatterFan/MatterFan.ino

@@ -24,10 +24,10 @@ MatterFan Fan;
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t debouceTime = 250;               // button debouncing time (ms)
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t debouceTime = 250;              // button debouncing time (ms)
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // set your board Analog Pin here - used for changing the Fan speed
 const uint8_t analogPin = A0;  // Analog Pin depends on each board
@@ -187,8 +187,8 @@ void loop() {
   if (button_state && time_diff > decommissioningTimeout) {
     Serial.println("Decommissioning the Generic Switch Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
- }
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
+  }
 
   // checks Analog pin and adjust the speed only if it has changed
   static int lastRead = 0;

libraries/Matter/examples/MatterMinimum/MatterMinimum.ino

@@ -39,9 +39,9 @@ const uint8_t ledPin = 2;  // Set your pin here if your board has not defined LE
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control - decommision the Matter Node
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // Matter Protocol Endpoint (On/OFF Light) Callback
 bool matterCB(bool state) {
@@ -103,7 +103,7 @@ void loop() {
   if (button_state && time_diff > decommissioningTimeout) {
     Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
 
   delay(500);

libraries/Matter/examples/MatterOnOffLight/MatterOnOffLight.ino

@@ -37,10 +37,10 @@ const uint8_t ledPin = 2;  // Set your pin here if your board has not defined LE
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t debouceTime = 250;               // button debouncing time (ms)
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t debouceTime = 250;              // button debouncing time (ms)
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // WiFi is manually set and started
 const char *ssid = "your-ssid";          // Change this to your WiFi SSID
@@ -148,6 +148,6 @@ void loop() {
     Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
     OnOffLight.setOnOff(false);  // turn the light off
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
 }

libraries/Matter/examples/MatterSmartButon/MatterSmartButon.ino

@@ -24,10 +24,10 @@ MatterGenericSwitch SmartButton;
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t debouceTime = 250;               // button debouncing time (ms)
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t debouceTime = 250;              // button debouncing time (ms)
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // WiFi is manually set and started
 const char *ssid = "your-ssid";          // Change this to your WiFi SSID
@@ -112,6 +112,6 @@ void loop() {
   if (button_state && time_diff > decommissioningTimeout) {
     Serial.println("Decommissioning the Generic Switch Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
 }

libraries/Matter/examples/MatterTemperatureLight/MatterTemperatureLight.ino

@@ -39,10 +39,10 @@ const uint8_t ledPin = 2;  // Set your pin here if your board has not defined LE
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t debouceTime = 250;               // button debouncing time (ms)
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t debouceTime = 250;              // button debouncing time (ms)
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // WiFi is manually set and started
 const char *ssid = "your-ssid";          // Change this to your WiFi SSID
@@ -192,6 +192,6 @@ void loop() {
     Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
     CW_WW_Light = false;  // turn the light off
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
 }

libraries/Matter/examples/MatterTemperatureSensor/MatterTemperatureSensor.ino

@@ -31,9 +31,9 @@ MatterTemperatureSensor SimulatedTemperatureSensor;
 const uint8_t buttonPin = BOOT_PIN;  // Set your pin here. Using BOOT Button.
 
 // Button control - decommision the Matter Node
-uint32_t button_time_stamp = 0;                 // debouncing control
-bool button_state = false;                      // false = released | true = pressed
-const uint32_t decommissioningTimeout = 5000;   // keep the button pressed for 5s, or longer, to decommission
+uint32_t button_time_stamp = 0;                // debouncing control
+bool button_state = false;                     // false = released | true = pressed
+const uint32_t decommissioningTimeout = 5000;  // keep the button pressed for 5s, or longer, to decommission
 
 // WiFi is manually set and started
 const char *ssid = "your-ssid";          // Change this to your WiFi SSID
@@ -98,14 +98,14 @@ void setup() {
 
 void loop() {
   static uint32_t timeCounter = 0;
- 
+
   // Print the current temperature value every 5s
   if (!(timeCounter++ % 10)) {  // delaying for 500ms x 10 = 5s
     // Print the current temperature value
     Serial.printf("Current Temperature is %.02f <Temperature Units>\r\n", SimulatedTemperatureSensor.getTemperature());
     // Update Temperature from the (Simulated) Hardware Sensor
     // Matter APP shall display the updated temperature percent
-    SimulatedTemperatureSensor.setTemperature(getSimulatedTemperature());  
+    SimulatedTemperatureSensor.setTemperature(getSimulatedTemperature());
   }
 
   // Check if the button has been pressed
@@ -124,8 +124,8 @@ void loop() {
   if (button_state && time_diff > decommissioningTimeout) {
     Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
-    button_time_stamp = millis(); // avoid running decommissining again, reboot takes a second or so
+    button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
-  
+
   delay(500);
 }