Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Continue Netlink conversions to per-namespace RTNL lock
     (IPv4 routing, routing rules, routing next hops, ARP ioctls)

   - Continue extending the use of netdev instance locks. As a driver
     opt-in protect queue operations and (in due course) ethtool
     operations with the instance lock and not RTNL lock.

   - Support collecting TCP timestamps (data submitted, sent, acked) in
     BPF, allowing for transparent (to the application) and lower
     overhead tracking of TCP RPC performance.

   - Tweak existing networking Rx zero-copy infra to support zero-copy
     Rx via io_uring.

   - Optimize MPTCP performance in single subflow mode by 29%.

   - Enable GRO on packets which went thru XDP CPU redirect (were queued
     for processing on a different CPU). Improving TCP stream
     performance up to 2x.

   - Improve performance of contended connect() by 200% by searching for
     an available 4-tuple under RCU rather than a spin lock. Bring an
     additional 229% improvement by tweaking hash distribution.

   - Avoid unconditionally touching sk_tsflags on RX, improving
     performance under UDP flood by as much as 10%.

   - Avoid skb_clone() dance in ping_rcv() to improve performance under
     ping flood.

   - Avoid FIB lookup in netfilter if socket is available, 20% perf win.

   - Rework network device creation (in-kernel) API to more clearly
     identify network namespaces and their roles. There are up to 4
     namespace roles but we used to have just 2 netns pointer arguments,
     interpreted differently based on context.

   - Use sysfs_break_active_protection() instead of trylock to avoid
     deadlocks between unregistering objects and sysfs access.

   - Add a new sysctl and sockopt for capping max retransmit timeout in
     TCP.

   - Support masking port and DSCP in routing rule matches.

   - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.

   - Support specifying at what time packet should be sent on AF_XDP
     sockets.

   - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
     users.

   - Add Netlink YAML spec for WiFi (nl80211) and conntrack.

   - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
     which only need to be exported when IPv6 support is built as a
     module.

   - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
     normal bridging.

   - Allow users to specify source port range for GENEVE tunnels.

   - netconsole: allow attaching kernel release, CPU ID and task name to
     messages as metadata

  Driver API:

   - Continue rework / fixing of Energy Efficient Ethernet (EEE) across
     the SW layers. Delegate the responsibilities to phylink where
     possible. Improve its handling in phylib.

   - Support symmetric OR-XOR RSS hashing algorithm.

   - Support tracking and preserving IRQ affinity by NAPI itself.

   - Support loopback mode speed selection for interface selftests.

  Device drivers:

   - Remove the IBM LCS driver for s390

   - Remove the sb1000 cable modem driver

   - Add support for SFP module access over SMBus

   - Add MCTP transport driver for MCTP-over-USB

   - Enable XDP metadata support in multiple drivers

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - add PCIe TLP Processing Hints (TPH) support for new AMD
           platforms
         - support dumping RoCE queue state for debug
         - opt into instance locking
      - Intel (100G, ice, idpf):
         - ice: rework MSI-X IRQ management and distribution
         - ice: support for E830 devices
         - iavf: add support for Rx timestamping
         - iavf: opt into instance locking
      - nVidia/Mellanox:
         - mlx4: use page pool memory allocator for Rx
         - mlx5: support for one PTP device per hardware clock
         - mlx5: support for 200Gbps per-lane link modes
         - mlx5: move IPSec policy check after decryption
      - AMD/Solarflare:
         - support FW flashing via devlink
      - Cisco (enic):
         - use page pool memory allocator for Rx
         - enable 32, 64 byte CQEs
         - get max rx/tx ring size from the device
      - Meta (fbnic):
         - support flow steering and RSS configuration
         - report queue stats
         - support TCP segmentation
         - support IRQ coalescing
         - support ring size configuration
      - Marvell/Cavium:
         - support AF_XDP
      - Wangxun:
         - support for PTP clock and timestamping
      - Huawei (hibmcge):
         - checksum offload
         - add more statistics

   - Ethernet virtual:
      - VirtIO net:
         - aggressively suppress Tx completions, improve perf by 96%
           with 1 CPU and 55% with 2 CPUs
         - expose NAPI to IRQ mapping and persist NAPI settings
      - Google (gve):
         - support XDP in DQO RDA Queue Format
         - opt into instance locking
      - Microsoft vNIC:
         - support BIG TCP

   - Ethernet NICs consumer, and embedded:
      - Synopsys (stmmac):
         - cleanup Tx and Tx clock setting and other link-focused
           cleanups
         - enable SGMII and 2500BASEX mode switching for Intel platforms
         - support Sophgo SG2044
      - Broadcom switches (b53):
         - support for BCM53101
      - TI:
         - iep: add perout configuration support
         - icssg: support XDP
      - Cadence (macb):
         - implement BQL
      - Xilinx (axinet):
         - support dynamic IRQ moderation and changing coalescing at
           runtime
         - implement BQL
         - report standard stats
      - MediaTek:
         - support phylink managed EEE
      - Intel:
         - igc: don't restart the interface on every XDP program change
      - RealTek (r8169):
         - support reading registers of internal PHYs directly
         - increase max jumbo packet size on RTL8125/RTL8126
      - Airoha:
         - support for RISC-V NPU packet processing unit
         - enable scatter-gather and support MTU up to 9kB
      - Tehuti (tn40xx):
         - support cards with TN4010 MAC and an Aquantia AQR105 PHY

   - Ethernet PHYs:
      - support for TJA1102S, TJA1121
      - dp83tg720: add randomized polling intervals for link detection
      - dp83822: support changing the transmit amplitude voltage
      - support for LEDs on 88q2xxx

   - CAN:
      - canxl: support Remote Request Substitution bit access
      - flexcan: add S32G2/S32G3 SoC

   - WiFi:
      - remove cooked monitor support
      - strict mode for better AP testing
      - basic EPCS support
      - OMI RX bandwidth reduction support
      - batman-adv: add support for jumbo frames

   - WiFi drivers:
      - RealTek (rtw88):
         - support RTL8814AE and RTL8814AU
      - RealTek (rtw89):
         - switch using wiphy_lock and wiphy_work
         - add BB context to manipulate two PHY as preparation of MLO
         - improve BT-coexistence mechanism to play A2DP smoothly
      - Intel (iwlwifi):
         - add new iwlmld sub-driver for latest HW/FW combinations
      - MediaTek (mt76):
         - preparation for mt7996 Multi-Link Operation (MLO) support
      - Qualcomm/Atheros (ath12k):
         - continued work on MLO
      - Silabs (wfx):
         - Wake-on-WLAN support

   - Bluetooth:
      - add support for skb TX SND/COMPLETION timestamping
      - hci_core: enable buffer flow control for SCO/eSCO
      - coredump: log devcd dumps into the monitor

   - Bluetooth drivers:
      - intel: add support to configure TX power
      - nxp: handle bootloader error during cmd5 and cmd7"

* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
  unix: fix up for "apparmor: add fine grained af_unix mediation"
  mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
  net: usb: asix: ax88772: Increase phy_name size
  net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
  net: libwx: fix Tx L4 checksum
  net: libwx: fix Tx descriptor content for some tunnel packets
  atm: Fix NULL pointer dereference
  net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
  net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
  net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
  net: phy: aquantia: add essential functions to aqr105 driver
  net: phy: aquantia: search for firmware-name in fwnode
  net: phy: aquantia: add probe function to aqr105 for firmware loading
  net: phy: Add swnode support to mdiobus_scan
  gve: add XDP DROP and PASS support for DQ
  gve: update XDP allocation path support RX buffer posting
  gve: merge packet buffer size fields
  gve: update GQ RX to use buf_size
  gve: introduce config-based allocation for XDP
  gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
  ...

Author: torvalds

CREDITS

@@ -3233,6 +3233,10 @@ N: Rui Prior
 E: [email protected]
 D: ATM device driver for NICStAR based cards
 
+N: Roopa Prabhu
+E: [email protected]
+D: Bridge co-maintainer, vxlan and networking contributor
+
 N: Stefan Probst
 E: [email protected]
 D: The Linux Support Team Erlangen, 1993-97

Documentation/arch/s390/driver-model.rst

@@ -244,7 +244,7 @@ information about the interrupt from the irb parameter.
 --------------------
 
 The ccwgroup mechanism is designed to handle devices consisting of multiple ccw
-devices, like lcs or ctc.
+devices, like qeth or ctc.
 
 The ccw driver provides a 'group' attribute. Piping bus ids of ccw devices to
 this attributes creates a ccwgroup device consisting of these ccw devices (if

Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml

@@ -63,6 +63,14 @@ properties:
   "#size-cells":
     const: 0
 
+  airoha,npu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the node used to configure the NPU module.
+      The Airoha Network Processor Unit (NPU) provides a configuration
+      interface to implement hardware flow offloading programming Packet
+      Processor Engine (PPE) flow table.
+
 patternProperties:
   "^ethernet@[1-4]$":
     type: object
@@ -132,6 +140,8 @@ examples:
                      <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 
+        airoha,npu = <&npu>;
+
         #address-cells = <1>;
         #size-cells = <0>;
 

Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml

@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,en7581-npu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha Network Processor Unit for EN7581 SoC
+
+maintainers:
+  - Lorenzo Bianconi <[email protected]>
+
+description:
+  The Airoha Network Processor Unit (NPU) provides a configuration interface
+  to implement wired and wireless hardware flow offloading programming Packet
+  Processor Engine (PPE) flow table.
+
+properties:
+  compatible:
+    enum:
+      - airoha,en7581-npu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: mbox host irq line
+      - description: watchdog0 irq line
+      - description: watchdog1 irq line
+      - description: watchdog2 irq line
+      - description: watchdog3 irq line
+      - description: watchdog4 irq line
+      - description: watchdog5 irq line
+      - description: watchdog6 irq line
+      - description: watchdog7 irq line
+      - description: wlan irq line0
+      - description: wlan irq line1
+      - description: wlan irq line2
+      - description: wlan irq line3
+      - description: wlan irq line4
+      - description: wlan irq line5
+
+  memory-region:
+    maxItems: 1
+    description:
+      Memory used to store NPU firmware binary.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      npu@1e900000 {
+        compatible = "airoha,en7581-npu";
+        reg = <0 0x1e900000 0 0x313000>;
+        interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+        memory-region = <&npu_binary>;
+      };
+    };

Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml

@@ -152,6 +152,12 @@ properties:
           The second range is is for the Amlogic specific configuration
           (for example the PRG_ETHERNET register range on Meson8b and newer)
 
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: macirq
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml

@@ -17,6 +17,9 @@ description:
 maintainers:
   - Neeraj Sanjay Kale <[email protected]>
 
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
 properties:
   compatible:
     enum:
@@ -40,10 +43,20 @@ properties:
       Host-To-Chip power save mechanism is driven by this GPIO
       connected to BT_WAKE_IN pin of the NXP chipset.
 
+  nxp,wakein-pin:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      The GPIO number of the NXP chipset used for BT_WAKE_IN.
+
+  nxp,wakeout-pin:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      The GPIO number of the NXP chipset used for BT_WAKE_OUT.
+
 required:
   - compatible
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -54,5 +67,8 @@ examples:
             fw-init-baudrate = <3000000>;
             firmware-name = "uartuart8987_bt_v0.bin";
             device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+            nxp,wakein-pin = /bits/ 8 <18>;
+            nxp,wakeout-pin = /bits/ 8 <19>;
+            local-bd-address = [66 55 44 33 22 11];
         };
     };

Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml

@@ -19,6 +19,7 @@ properties:
       - qcom,qca2066-bt
       - qcom,qca6174-bt
       - qcom,qca9377-bt
+      - qcom,wcn3950-bt
       - qcom,wcn3988-bt
       - qcom,wcn3990-bt
       - qcom,wcn3991-bt
@@ -138,6 +139,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,wcn3950-bt
               - qcom,wcn3988-bt
               - qcom,wcn3990-bt
               - qcom,wcn3991-bt

Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml

@@ -10,9 +10,6 @@ title:
 maintainers:
   - Marc Kleine-Budde <[email protected]>
 
-allOf:
-  - $ref: can-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -28,6 +25,7 @@ properties:
           - fsl,vf610-flexcan
           - fsl,ls1021ar2-flexcan
           - fsl,lx2160ar1-flexcan
+          - nxp,s32g2-flexcan
       - items:
           - enum:
               - fsl,imx53-flexcan
@@ -43,12 +41,25 @@ properties:
           - enum:
               - fsl,ls1028ar1-flexcan
           - const: fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - nxp,s32g3-flexcan
+          - const: nxp,s32g2-flexcan
+      - items:
+          - enum:
+              - fsl,imx94-flexcan
+          - const: fsl,imx95-flexcan
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 4
 
   clocks:
     maxItems: 2
@@ -70,6 +81,9 @@ properties:
   xceiver-supply:
     description: Regulator that powers the CAN transceiver.
 
+  phys:
+    maxItems: 1
+
   big-endian:
     $ref: /schemas/types.yaml#/definitions/flag
     description: |
@@ -136,6 +150,41 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nxp,s32g2-flexcan
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Message Buffer interrupt for mailboxes 0-7 and Enhanced RX FIFO
+            - description: Device state change
+            - description: Bus Error detection
+            - description: Message Buffer interrupt for mailboxes 8-127
+        interrupt-names:
+          items:
+            - const: mb-0
+            - const: state
+            - const: berr
+            - const: mb-1
+      required:
+        - interrupt-names
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names: false
+  - if:
+      required:
+        - xceiver-supply
+    then:
+      properties:
+        phys: false
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml

@@ -16,6 +16,7 @@ properties:
   compatible:
     oneOf:
       - const: brcm,bcm5325
+      - const: brcm,bcm53101
       - const: brcm,bcm53115
       - const: brcm,bcm53125
       - const: brcm,bcm53128
@@ -77,6 +78,7 @@ allOf:
           contains:
             enum:
               - brcm,bcm5325
+              - brcm,bcm53101
               - brcm,bcm53115
               - brcm,bcm53125
               - brcm,bcm53128

Documentation/devicetree/bindings/net/ethernet-phy.yaml

@@ -232,6 +232,12 @@ properties:
       PHY's that have configurable TX internal delays. If this property is
       present then the PHY applies the TX delay.
 
+  tx-amplitude-100base-tx-percent:
+    description:
+      Transmit amplitude gain applied for 100BASE-TX. 100% matches 2V
+      peak-to-peak specified in ANSI X3.263. When omitted, the PHYs default
+      will be left as is.
+
   leds:
     type: object