Apply changes from review

Fix formatting, removes function prototypes from examples, removes unnecessary header info, fixes version number, adds missing "else" in RTCresetRemote().

Co-Authored-By: per1234 <[email protected]>

Author: amcmahon01

examples/Mode0_32-bit_Counter/Mode0_32-bit_Counter.ino

@@ -18,8 +18,6 @@
 /* Create an rtc object */
 RTCZero rtc;
 
-void countDone(void);
-
 void setup()
 {
   Serial.begin(9600);
@@ -38,4 +36,4 @@ void loop()
 void countDone()                                // interrupt when compare value is reached
 {                              
   Serial.println("Reset!");
-}
+}

examples/Mode1_16-bit_Periodic_Counter/Mode1_16-bit_Periodic_Counter.ino

@@ -18,8 +18,6 @@
 /* Create an rtc object */
 RTCZero rtc;
 
-void countInt(void);
-
 void setup()
 {
   Serial.begin(9600);
@@ -43,4 +41,4 @@ void countInt()                                 // interrupt when compare value
 
   if (source == rtc.INT_COMP0) Serial.println("Count = Compare 0!");
   if (source == rtc.INT_COMP1) Serial.println("Count = Compare 1!");
-} 
+} 

examples/Mode1_16-bit_Periodic_Counter_Overflow/Mode1_16-bit_Periodic_Counter_Overflow.ino

@@ -19,8 +19,6 @@
 /* Create an rtc object */
 RTCZero rtc;
 
-void countInt(void);
-
 void setup()
 {
   Serial.begin(9600);
@@ -46,4 +44,4 @@ void countInt()                                 // interrupt when compare value
   if (source == rtc.INT_COMP0) Serial.println("Count = Compare 0!");
   if (source == rtc.INT_COMP1) Serial.println("Count = Compare 1!");
   if (source == rtc.INT_OVERFLOW) Serial.println("Overflow!");
-} 
+} 

keywords.txt

@@ -52,18 +52,18 @@ setAlarmTime	KEYWORD2
 enableAlarm	KEYWORD2
 disableAlarm	KEYWORD2
 
-enableCounter   KEYWORD2
-disableCounter  KEYWORD2
+enableCounter	KEYWORD2
+disableCounter	KEYWORD2
 
-enableOverflow  KEYWORD2
-disableOverflow KEYWORD2
+enableOverflow	KEYWORD2
+disableOverflow	KEYWORD2
 
-getIntSource    KEYWORD2
-getCount    KEYWORD2
-getCompare  KEYWORD2
+getIntSource	KEYWORD2
+getCount	KEYWORD2
+getCompare	KEYWORD2
 
-setCount    KEYWORD2
-setPeriod   KEYWORD2
+setCount	KEYWORD2
+setPeriod	KEYWORD2
 
 standbyMode	KEYWORD2
 

library.properties

@@ -1,5 +1,5 @@
 name=RTCZero
-version=2.0.0
+version=1.7.0
 author=Arduino
 maintainer=Arduino <[email protected]>
 sentence=Allows to use the RTC functionalities. For Arduino Zero, MKRZero and MKR1000 only.

src/RTCZero.cpp

@@ -17,8 +17,6 @@
   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */
 
-//Edited by A. McMahon 2/20/2020, Added Mode 0 and Mode 1
-
 #include <time.h>
 
 #include "RTCZero.h"
@@ -55,7 +53,7 @@ void RTCZero::begin(bool resetTime, uint8_t mode, bool clearOnMatch, Prescaler p
   config32kOSC();
 
 
-   if (rtc_mode==0) {
+  if (rtc_mode==0) {
     // If the RTC is in 32-bit counter mode and the reset was
     // not due to POR or BOD, preserve the clock time
     // POR causes a reset anyway, BOD behaviour is?
@@ -730,7 +728,7 @@ void RTCZero::RTCreset()
 void RTCZero::RTCresetRemove()
 {
   if (rtc_mode==0) RTC->MODE0.CTRL.reg &= ~RTC_MODE0_CTRL_SWRST;        // software reset remove, Mode 0
-  if (rtc_mode==1) RTC->MODE1.CTRL.reg &= ~RTC_MODE1_CTRL_SWRST;        // software reset remove, Mode 1
+  else if (rtc_mode==1) RTC->MODE1.CTRL.reg &= ~RTC_MODE1_CTRL_SWRST;        // software reset remove, Mode 1
   else RTC->MODE2.CTRL.reg &= ~RTC_MODE2_CTRL_SWRST;                    // software reset remove, Mode 2
   while (RTCisSyncing())
     ;

src/RTCZero.h

@@ -17,8 +17,6 @@
   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */
 
-//Edited by A. McMahon 2/20/2020, Added Mode 0 and Mode 1
-
 #ifndef RTC_ZERO_H
 #define RTC_ZERO_H