PCB TODO

1. Invalid package for the controller
2. Controller's pin 8 shorted to ground
3. Power converter pin 7 (output) connected using thin wire
4. Lot of text labels mixed up on the silk layer
5. "Power" and "EEPROM" labels mixed up
6. Holes for shottki diode are too small
7. Holes for the radio module are too small
8. Shottki diode invalid polarity
9. Motor power wires are too thin
10. Motor disable line is actually motor enable
11. Mixed up pins on the RS-232 connector
12. Missing power on the RS-232 driver
13. One of capacitors is connected to Vcc instead of Vdd
14. Pin 1 on the programming connectors should be more visible
15. Fix numbers of all components on the silk layer. Especially power sockets (input and stabilized)