Translations update from Weblate

locale/ID.po

@@ -172,6 +172,10 @@ msgstr "pin %q tidak valid"
 msgid "%q should be an int"
 msgstr "%q harus berupa int"
 
+#: shared-bindings/usb_hid/Device.c
+msgid "%q with a report ID of 0 must be of length 1"
+msgstr ""
+
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
 msgstr "%q() mengambil posisi argumen %d tapi %d yang diberikan"
@@ -376,7 +380,9 @@ msgstr "Jenis alamat di luar batas"
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Semua perangkat I2C sedang digunakan"
 
@@ -1321,8 +1327,11 @@ msgstr "Frekuensi PWM tidak valid"
 msgid "Invalid Pin"
 msgstr ""
 
-#: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c
-#: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
+#: ports/espressif/bindings/espidf/__init__.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/esp_error.c py/moduerrno.c
+#: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid argument"
 msgstr "Argumen tidak valid"
 
@@ -1370,10 +1379,6 @@ msgstr "File tidak valid"
 msgid "Invalid format chunk size"
 msgstr "Ukuran potongan format tidak valid"
 
-#: ports/espressif/common-hal/busio/I2C.c
-msgid "Invalid frequency"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Akses memori tidak valid."
@@ -1414,6 +1419,7 @@ msgstr "Pin untuk channel kanan tidak valid"
 #: ports/espressif/common-hal/busio/SPI.c
 #: ports/espressif/common-hal/busio/UART.c
 #: ports/espressif/common-hal/canio/CAN.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/I2C.c
 #: ports/raspberrypi/common-hal/busio/I2C.c
@@ -1796,6 +1802,10 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+msgid "Only one address is allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/alarm/time/TimeAlarm.c
 #: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 #: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c

locale/cs.po

@@ -168,6 +168,10 @@ msgstr "Pin %q není platný"
 msgid "%q should be an int"
 msgstr "%q by měl být int"
 
+#: shared-bindings/usb_hid/Device.c
+msgid "%q with a report ID of 0 must be of length 1"
+msgstr ""
+
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
 msgstr "%q() vyžaduje %d pozičních argumentů, ale %d jich bylo zadáno"
@@ -372,7 +376,9 @@ msgstr ""
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -1304,8 +1310,11 @@ msgstr ""
 msgid "Invalid Pin"
 msgstr ""
 
-#: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c
-#: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
+#: ports/espressif/bindings/espidf/__init__.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/esp_error.c py/moduerrno.c
+#: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid argument"
 msgstr ""
 
@@ -1353,10 +1362,6 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c
-msgid "Invalid frequency"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1397,6 +1402,7 @@ msgstr ""
 #: ports/espressif/common-hal/busio/SPI.c
 #: ports/espressif/common-hal/busio/UART.c
 #: ports/espressif/common-hal/canio/CAN.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/I2C.c
 #: ports/raspberrypi/common-hal/busio/I2C.c
@@ -1774,6 +1780,10 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+msgid "Only one address is allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/alarm/time/TimeAlarm.c
 #: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 #: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c

locale/de_DE.po

@@ -173,6 +173,10 @@ msgstr "%q Pin ungültig"
 msgid "%q should be an int"
 msgstr "%q sollte ein integer sein"
 
+#: shared-bindings/usb_hid/Device.c
+msgid "%q with a report ID of 0 must be of length 1"
+msgstr ""
+
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
 msgstr ""
@@ -378,7 +382,9 @@ msgstr "Adresstyp außerhalb des zulässigen Bereichs"
 msgid "All CAN peripherals are in use"
 msgstr "Alle CAN Schnittstellen sind in Benutzung"
 
-#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "Alle I2C-Peripheriegeräte sind in Benutzung"
 
@@ -1321,8 +1327,11 @@ msgstr "Ungültige PWM Frequenz"
 msgid "Invalid Pin"
 msgstr "Ungültiger Pin"
 
-#: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c
-#: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
+#: ports/espressif/bindings/espidf/__init__.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/esp_error.c py/moduerrno.c
+#: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid argument"
 msgstr "Ungültiges Argument"
 
@@ -1370,10 +1379,6 @@ msgstr "Ungültige Datei"
 msgid "Invalid format chunk size"
 msgstr "Ungültige format chunk size"
 
-#: ports/espressif/common-hal/busio/I2C.c
-msgid "Invalid frequency"
-msgstr "Ungültige Frequenz"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Ungültiger Speicherzugriff."
@@ -1414,6 +1419,7 @@ msgstr "Ungültiger Pin für rechten Kanal"
 #: ports/espressif/common-hal/busio/SPI.c
 #: ports/espressif/common-hal/busio/UART.c
 #: ports/espressif/common-hal/canio/CAN.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/I2C.c
 #: ports/raspberrypi/common-hal/busio/I2C.c
@@ -1798,6 +1804,10 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+msgid "Only one address is allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/alarm/time/TimeAlarm.c
 #: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 #: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c
@@ -4564,6 +4574,9 @@ msgstr ""
 msgid "zi must be of shape (n_section, 2)"
 msgstr ""
 
+#~ msgid "Invalid frequency"
+#~ msgstr "Ungültige Frequenz"
+
 #~ msgid "Data 0 pin must be byte aligned."
 #~ msgstr "Data 0 Pin muss Byte aligned sein."
 

locale/el.po

@@ -165,6 +165,10 @@ msgstr ""
 msgid "%q should be an int"
 msgstr ""
 
+#: shared-bindings/usb_hid/Device.c
+msgid "%q with a report ID of 0 must be of length 1"
+msgstr ""
+
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
 msgstr ""
@@ -369,7 +373,9 @@ msgstr ""
 msgid "All CAN peripherals are in use"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -1301,8 +1307,11 @@ msgstr ""
 msgid "Invalid Pin"
 msgstr ""
 
-#: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c
-#: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
+#: ports/espressif/bindings/espidf/__init__.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/esp_error.c py/moduerrno.c
+#: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid argument"
 msgstr ""
 
@@ -1350,10 +1359,6 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
-#: ports/espressif/common-hal/busio/I2C.c
-msgid "Invalid frequency"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -1394,6 +1399,7 @@ msgstr ""
 #: ports/espressif/common-hal/busio/SPI.c
 #: ports/espressif/common-hal/busio/UART.c
 #: ports/espressif/common-hal/canio/CAN.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/I2C.c
 #: ports/raspberrypi/common-hal/busio/I2C.c
@@ -1771,6 +1777,10 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr ""
 
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+msgid "Only one address is allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/alarm/time/TimeAlarm.c
 #: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 #: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c

locale/en_GB.po

@@ -174,6 +174,10 @@ msgstr "%q pin invalid"
 msgid "%q should be an int"
 msgstr "%q should be an int"
 
+#: shared-bindings/usb_hid/Device.c
+msgid "%q with a report ID of 0 must be of length 1"
+msgstr ""
+
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
 msgstr "%q() takes %d positional arguments but %d were given"
@@ -378,7 +382,9 @@ msgstr "Address type out of range"
 msgid "All CAN peripherals are in use"
 msgstr "All CAN peripherals are in use"
 
-#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
 msgstr "All I2C peripherals are in use"
 
@@ -1316,8 +1322,11 @@ msgstr "Invalid PWM frequency"
 msgid "Invalid Pin"
 msgstr "Invalid pin"
 
-#: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c
-#: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
+#: ports/espressif/bindings/espidf/__init__.c
+#: ports/espressif/common-hal/busio/I2C.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+#: ports/espressif/esp_error.c py/moduerrno.c
+#: shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid argument"
 msgstr "Invalid argument"
 
@@ -1365,10 +1374,6 @@ msgstr "Invalid file"
 msgid "Invalid format chunk size"
 msgstr "Invalid format chunk size"
 
-#: ports/espressif/common-hal/busio/I2C.c
-msgid "Invalid frequency"
-msgstr "Invalid frequency"
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr "Invalid memory access."
@@ -1409,6 +1414,7 @@ msgstr "Invalid pin for right channel"
 #: ports/espressif/common-hal/busio/SPI.c
 #: ports/espressif/common-hal/busio/UART.c
 #: ports/espressif/common-hal/canio/CAN.c
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/I2C.c
 #: ports/raspberrypi/common-hal/busio/I2C.c
@@ -1790,6 +1796,10 @@ msgstr ""
 msgid "Only one TouchAlarm can be set in deep sleep."
 msgstr "Only one TouchAlarm can be set in deep sleep."
 
+#: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c
+msgid "Only one address is allowed"
+msgstr ""
+
 #: ports/espressif/common-hal/alarm/time/TimeAlarm.c
 #: ports/nrf/common-hal/alarm/time/TimeAlarm.c
 #: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c
@@ -4529,6 +4539,9 @@ msgstr "zi must be of float type"
 msgid "zi must be of shape (n_section, 2)"
 msgstr "zi must be of shape (n_section, 2)"
 
+#~ msgid "Invalid frequency"
+#~ msgstr "Invalid frequency"
+
 #~ msgid "Data 0 pin must be byte aligned."
 #~ msgstr "Data 0 pin must be byte aligned."