Add enumerate function #32
Labels
Milestone
Comments
cwalther
pushed a commit
to cwalther/circuitpython
that referenced
this issue
Jun 17, 2023
Starting with 2757acf, the `top` variable in `nlr_jump()` in `nlraarch64.c` was assigned to register `x19` by the compiler. However, the assembly code writes over that register with ldp x19, x20, [%0, adafruit#32] since `%0` is now `x19`. This causes the next line ldp lr, x9, [%0, adafruit#16] to load the wrong values. To fix the issue, we move the value of the `top` variable from an unknown register to a known register at the beginning of the asm code then only use known/hard-coded registers after that. Fixes issue micropython#11754. Signed-off-by: David Lechner <[email protected]>
cwalther
pushed a commit
to cwalther/circuitpython
that referenced
this issue
Jun 1, 2024
Although the original motivation given for the workaround[1] is correct, nlr.o and nlrthumb.o are linked with a small enough distance that the problem does not occur, and the workaround isn't necessary. The distance between the b instruction and its target (nlr_push_tail) is just 64 bytes[2], well within the ±2046 byte range addressable by an unconditional branch instruction in Thumb mode. The workaround induces a relocation in the text section (textrel), which isn't supported everywhere, notably not on musl-libc[3], where it causes a crash on start-up. With the workaround removed, micropython works on an ARMv5T Linux system built with musl-libc. This commit changes nlrthumb.c to use a direct jump by default, but leaves the long jump workaround as an option for those cases where it's actually needed. [1]: commit dd376a2 Author: Damien George <[email protected]> Date: Fri Sep 1 15:25:29 2017 +1000 py/nlrthumb: Get working again on standard Thumb arch (ie not Thumb2). "b" on Thumb might not be long enough for the jump to nlr_push_tail so it must be done indirectly. [2]: Excerpt from objdump -d micropython: 000095c4 <nlr_push_tail>: 95c4: b510 push {r4, lr} 95c6: 0004 movs r4, r0 95c8: f02d fd42 bl 37050 <mp_thread_get_state> 95cc: 6943 ldr r3, [r0, adafruit#20] 95ce: 6023 str r3, [r4, #0] 95d0: 6144 str r4, [r0, adafruit#20] 95d2: 2000 movs r0, #0 95d4: bd10 pop {r4, pc} 000095d6 <nlr_pop>: 95d6: b510 push {r4, lr} 95d8: f02d fd3a bl 37050 <mp_thread_get_state> 95dc: 6943 ldr r3, [r0, adafruit#20] 95de: 681b ldr r3, [r3, #0] 95e0: 6143 str r3, [r0, adafruit#20] 95e2: bd10 pop {r4, pc} 000095e4 <nlr_push>: 95e4: 60c4 str r4, [r0, adafruit#12] 95e6: 6105 str r5, [r0, adafruit#16] 95e8: 6146 str r6, [r0, adafruit#20] 95ea: 6187 str r7, [r0, adafruit#24] 95ec: 4641 mov r1, r8 95ee: 61c1 str r1, [r0, adafruit#28] 95f0: 4649 mov r1, r9 95f2: 6201 str r1, [r0, adafruit#32] 95f4: 4651 mov r1, sl 95f6: 6241 str r1, [r0, adafruit#36] @ 0x24 95f8: 4659 mov r1, fp 95fa: 6281 str r1, [r0, adafruit#40] @ 0x28 95fc: 4669 mov r1, sp 95fe: 62c1 str r1, [r0, adafruit#44] @ 0x2c 9600: 4671 mov r1, lr 9602: 6081 str r1, [r0, adafruit#8] 9604: e7de b.n 95c4 <nlr_push_tail> [3]: https://www.openwall.com/lists/musl/2020/09/25/4 Signed-off-by: J. Neuschäfer <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
It looks like the samd21 port doesn't have python's enumerate function enabled. The ESP port seems to have it so there must be a magic define to find and flip on. Need to dig into the code further to find it and enable support (enumerate is a very useful core function).
The text was updated successfully, but these errors were encountered: