diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index 705ea71b07a1..9ac1dd3483b5 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -39,6 +39,18 @@ }; }; + dp-dsi0-connector { + compatible = "dp-connector"; + label = "DSI0"; + type = "mini"; + + port { + dp_dsi0_connector_in: endpoint { + remote-endpoint = <&dsi2dp_bridge_out>; + }; + }; + }; + vreg_conn_1p8: regulator-conn-1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; @@ -65,6 +77,64 @@ regulator-always-on; }; + vreg_12p0: regulator-vreg-12p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_12P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vreg_1p0: regulator-vreg-1p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + vin-supply = <&vreg_1p8>; + }; + + vreg_1p8: regulator-vreg-1p8 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_5p0>; + }; + + vreg_3p0: regulator-vreg-3p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_3P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&vreg_12p0>; + }; + + vreg_5p0: regulator-vreg-5p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_5P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vreg_12p0>; + }; + wcn6855-pmu { compatible = "qcom,wcn6855-pmu"; @@ -288,6 +358,86 @@ }; }; +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + io_expander: pinctrl@3e { + compatible = "semtech,sx1509q"; + reg = <0x3e>; + interrupts-extended = <&tlmm 58 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + semtech,probe-reset; + }; + + i2c-mux@77 { + compatible = "nxp,pca9542"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + bridge@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&io_expander 0 IRQ_TYPE_EDGE_FALLING>; + enable-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&vreg_1p0>; + vdd18-supply = <&vreg_1p8>; + vdd33-supply = <&vreg_3p0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_bridge_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_bridge_out: endpoint { + remote-endpoint = <&dp_dsi0_connector_in>; + }; + }; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l11a>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&dsi2dp_bridge_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vcca-supply = <&vreg_l5a>; + status = "okay"; +}; + &pcie { perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sm6150.dtsi b/arch/arm64/boot/dts/qcom/sm6150.dtsi index d8e3c0c54dc2..de4293f2e6dd 100644 --- a/arch/arm64/boot/dts/qcom/sm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6150.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. */ +#include #include #include #include @@ -3657,14 +3658,191 @@ #power-domain-cells = <1>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm6150-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_CORE_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm6150-dpu"; + reg = <0x0 0x0ae01000 0x0 0x8f000>, + <0x0 0x0aeb0000 0x0 0x2008>; + reg-names = "mdp", + "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupts-extended = <&mdss 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm6150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm6150-dsi-phy-14nm"; + reg = <0x0 0x0ae94400 0x0 0x100>, + <0x0 0x0ae94500 0x0 0x300>, + <0x0 0x0ae94800 0x0 0x124>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,qcs615-dispcc"; reg = <0 0x0af00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <0>, - <0>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, <0>, <0>, <0>;