locale: Restore translations lost in 3574670 Merge pull request adafruit#2931 from tannewt/esp32s2_digitalio

Author: jepler

locale/cs.po

@@ -3,91 +3,99 @@
 # This file is distributed under the same license as the PACKAGE package.
 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
-#, fuzzy
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:55-0400\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"POT-Creation-Date: 2020-05-19 15:01+0800\n"
+"PO-Revision-Date: 2020-05-24 03:22+0000\n"
+"Last-Translator: dronecz <[email protected]>\n"
 "Language-Team: LANGUAGE <[email protected]>\n"
-"Language: \n"
+"Language: cs\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
+"X-Generator: Weblate 4.1-dev\n"
 
 #: main.c
 msgid ""
 "\n"
 "Code done running. Waiting for reload.\n"
 msgstr ""
+"\n"
+"Kód byl dokončen. Čekám na opětovné načtení.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
+"\n"
+"Založte prosím problém s obsahem vaší jednotky CIRCUITPY na adrese\n"
+"https://github.com/adafruit/circuitpython/issues\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
+"\n"
+"Pro ukončení, prosím resetujte desku bez "
 
 #: py/obj.c
 msgid "  File \"%q\""
-msgstr ""
+msgstr "  Soubor \"% q\""
 
 #: py/obj.c
 msgid "  File \"%q\", line %d"
-msgstr ""
+msgstr "  Soubor \"% q\", řádek% d"
 
 #: main.c
 msgid " output:\n"
-msgstr ""
+msgstr " výstup:\n"
 
 #: py/objstr.c
 #, c-format
 msgid "%%c requires int or char"
-msgstr ""
+msgstr "%% c vyžaduje int nebo char"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "%d address pins and %d rgb pins indicate a height of %d, not %d"
-msgstr ""
+msgstr "%d adresní piny a %d rgb piny označují výšku %d, nikoli %d"
 
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
-msgstr ""
+msgstr "%q se nyní používá"
 
 #: py/obj.c
 msgid "%q index out of range"
-msgstr ""
+msgstr "%q index je mimo rozsah"
 
 #: py/obj.c
 msgid "%q indices must be integers, not %s"
-msgstr ""
+msgstr "Indexy% q musí být celá čísla, nikoli% s"
 
 #: shared-bindings/vectorio/Polygon.c
 msgid "%q list must be a list"
-msgstr ""
+msgstr "Seznam% q musí být seznam"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
 #: shared-bindings/displayio/Shape.c shared-bindings/vectorio/Circle.c
 #: shared-bindings/vectorio/Rectangle.c
 msgid "%q must be >= 1"
-msgstr ""
+msgstr "% q musí být > = 1"
 
 #: shared-module/vectorio/Polygon.c
 msgid "%q must be a tuple of length 2"
-msgstr ""
+msgstr "% q musí být n-tice délky 2"
 
 #: shared-bindings/fontio/BuiltinFont.c
 msgid "%q should be an int"
-msgstr ""
+msgstr "% q by měl být int"
 
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
@@ -368,10 +376,6 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c
-msgid "Both RX and TX required for flow control"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -805,7 +809,7 @@ msgstr ""
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -884,11 +888,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr ""
 
-#: ports/stm/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -964,8 +968,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1076,6 +1079,10 @@ msgstr ""
 msgid "Name too long"
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
@@ -1238,10 +1245,6 @@ msgstr ""
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 
-#: shared-bindings/digitalio/DigitalInOut.c
-msgid "Pin is input only"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/countio/Counter.c
 msgid "Pin must support hardware interrupts"
 msgstr ""
@@ -1419,7 +1422,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3066,7 +3069,8 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""