Merge pull request adafruit#2269 from theacodes/add-winterbloom-sol

Add board configuration for Winterbloom Sol

Author: dhalbert

.github/workflows/build.yml

@@ -158,6 +158,7 @@ jobs:
         - "trinket_m0_haxpress"
         - "uchip"
         - "ugame10"
+        - "winterbloom_sol"
 
     steps:
     - name: Set up Python 3.5

ports/atmel-samd/boards/winterbloom_sol/board.c

@@ -0,0 +1,38 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "boards/board.h"
+#include "mpconfigboard.h"
+
+void board_init(void) {
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}

ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.h

@@ -0,0 +1,33 @@
+#define MICROPY_HW_BOARD_NAME "Winterbloom Sol"
+#define MICROPY_HW_MCU_NAME "samd51j20"
+
+#define CIRCUITPY_MCU_FAMILY samd51
+
+#define MICROPY_HW_LED_STATUS (&pin_PA23)
+#define MICROPY_HW_NEOPIXEL (&pin_PB03)
+
+// These are pins not to reset.
+// QSPI Data pins
+#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11)
+// QSPI CS, QSPI SCK and NeoPixel pin
+#define MICROPY_PORT_B (PORT_PB03 | PORT_PB10 | PORT_PB11)
+#define MICROPY_PORT_C (0)
+#define MICROPY_PORT_D (0)
+
+#define AUTORESET_DELAY_MS 500
+
+// If you change this, then make sure to update the linker scripts as well to
+// make sure you don't overwrite code
+#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
+
+#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
+
+#define BOARD_HAS_CRYSTAL 1
+
+#define DEFAULT_SPI_BUS_SCK (&pin_PA17)
+#define DEFAULT_SPI_BUS_MOSI (&pin_PB23)
+#define DEFAULT_SPI_BUS_MISO (&pin_PB22)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1

ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk

@@ -0,0 +1,27 @@
+LD_FILE = boards/samd51x20-bootloader-external-flash.ld
+# Adafruit
+USB_VID = 0x239A
+# Allocated for Winterbloom Sol
+# https://github.com/adafruit/circuitpython/issues/2217
+USB_PID = 0x8062
+USB_PRODUCT = "Sol"
+USB_MANUFACTURER = "Winterbloom"
+
+CHIP_VARIANT = SAMD51J20A
+CHIP_FAMILY = samd51
+
+QSPI_FLASH_FILESYSTEM = 1
+EXTERNAL_FLASH_DEVICE_COUNT = 1
+EXTERNAL_FLASH_DEVICES = W25Q32JV_IQ
+LONGINT_IMPL = MPZ
+
+# Disable modules that are unusable on this special-purpose board.
+CIRCUITPY_AUDIOBUSIO = 0
+CIRCUITPY_AUDIOIO = 0
+CIRCUITPY_BLEIO = 0
+CIRCUITPY_DISPLAYIO = 0
+CIRCUITPY_GAMEPAD = 0
+CIRCUITPY_I2CSLAVE = 0
+CIRCUITPY_NETWORK = 0
+CIRCUITPY_TOUCHIO = 0
+CIRCUITPY_PS2IO = 0

ports/atmel-samd/boards/winterbloom_sol/pins.c

@@ -0,0 +1,15 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA17) },
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB23) },
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB22) },
+    { MP_ROM_QSTR(MP_QSTR_DAC_CS), MP_ROM_PTR(&pin_PA18) },
+    { MP_ROM_QSTR(MP_QSTR_G1), MP_ROM_PTR(&pin_PA20) },
+    { MP_ROM_QSTR(MP_QSTR_G2), MP_ROM_PTR(&pin_PA21) },
+    { MP_ROM_QSTR(MP_QSTR_G3), MP_ROM_PTR(&pin_PA22) },
+    { MP_ROM_QSTR(MP_QSTR_G4), MP_ROM_PTR(&pin_PA23) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PB03) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

supervisor/shared/external_flash/devices.h

@@ -300,6 +300,23 @@ typedef struct {
     .write_status_register_split = false, \
 }
 
+// Settings for the Winbond W25Q32JV-IQ 4MiB SPI flash.
+// Datasheet: https://www.mouser.com/datasheet/2/949/w25q32jv_revg_03272018_plus-1489806.pdf
+#define W25Q32JV_IQ {\
+    .total_size = (1 << 22), /* 4 MiB */ \
+    .start_up_time_us = 5000, \
+    .manufacturer_id = 0xef, \
+    .memory_type = 0x40, \
+    .capacity = 0x16, \
+    .max_clock_speed_mhz = 133, \
+    .quad_enable_bit_mask = 0x02, \
+    .has_sector_protection = false, \
+    .supports_fast_read = true, \
+    .supports_qspi = true, \
+    .supports_qspi_writes = true, \
+    .write_status_register_split = false, \
+}
+
 // Settings for the Winbond W25Q64JV-IM 8MiB SPI flash. Note that JV-IQ has a different .memory_type (0x40)
 // Datasheet: http://www.winbond.com/resource-files/w25q64jv%20revj%2003272018%20plus.pdf
 #define W25Q64JV_IM {\