cmd/compile: put spills in better places

Previously we always issued a spill right after the op
that was being spilled.  This CL pushes spills father away
from the generator, hopefully pushing them into unlikely branches.
For example:

  x = ...
  if unlikely {
    call ...
  }
  ... use x ...

Used to compile to

  x = ...
  spill x
  if unlikely {
    call ...
    restore x
  }

It now compiles to

  x = ...
  if unlikely {
    spill x
    call ...
    restore x
  }

This is particularly useful for code which appends, as the only
call is an unlikely call to growslice.  It also helps for the
spills needed around write barrier calls.

The basic algorithm is walk down the dominator tree following a
path where the block still dominates all of the restores.  We're
looking for a block that:
 1) dominates all restores
 2) has the value being spilled in a register
 3) has a loop depth no deeper than the value being spilled

The walking-down code is iterative.  I was forced to limit it to
searching 100 blocks so it doesn't become O(n^2).  Maybe one day
we'll find a better way.

I had to delete most of David's code which pushed spills out of loops.
I suspect this CL subsumes most of the cases that his code handled.

Generally positive performance improvements, but hard to tell for sure
with all the noise.  (compilebench times are unchanged.)

name                      old time/op    new time/op    delta
BinaryTree17-12              2.91s ±15%     2.80s ±12%    ~     (p=0.063 n=10+10)
Fannkuch11-12                3.47s ± 0%     3.30s ± 4%  -4.91%   (p=0.000 n=9+10)
FmtFprintfEmpty-12          48.0ns ± 1%    47.4ns ± 1%  -1.32%    (p=0.002 n=9+9)
FmtFprintfString-12         85.6ns ±11%    79.4ns ± 3%  -7.27%  (p=0.005 n=10+10)
FmtFprintfInt-12            91.8ns ±10%    85.9ns ± 4%    ~      (p=0.203 n=10+9)
FmtFprintfIntInt-12          135ns ±13%     127ns ± 1%  -5.72%   (p=0.025 n=10+9)
FmtFprintfPrefixedInt-12     167ns ± 1%     168ns ± 2%    ~      (p=0.580 n=9+10)
FmtFprintfFloat-12           249ns ±11%     230ns ± 1%  -7.32%  (p=0.000 n=10+10)
FmtManyArgs-12               504ns ± 7%     506ns ± 1%    ~       (p=0.198 n=9+9)
GobDecode-12                6.95ms ± 1%    7.04ms ± 1%  +1.37%  (p=0.001 n=10+10)
GobEncode-12                6.32ms ±13%    6.04ms ± 1%    ~     (p=0.063 n=10+10)
Gzip-12                      233ms ± 1%     235ms ± 0%  +1.01%   (p=0.000 n=10+9)
Gunzip-12                   40.1ms ± 1%    39.6ms ± 0%  -1.12%   (p=0.000 n=10+8)
HTTPClientServer-12          227µs ± 9%     221µs ± 5%    ~       (p=0.114 n=9+8)
JSONEncode-12               16.1ms ± 2%    15.8ms ± 1%  -2.09%    (p=0.002 n=9+8)
JSONDecode-12               61.8ms ±11%    57.9ms ± 1%  -6.30%   (p=0.000 n=10+9)
Mandelbrot200-12            4.30ms ± 3%    4.28ms ± 1%    ~      (p=0.203 n=10+8)
GoParse-12                  3.18ms ± 2%    3.18ms ± 2%    ~     (p=0.579 n=10+10)
RegexpMatchEasy0_32-12      76.7ns ± 1%    77.5ns ± 1%  +0.92%    (p=0.002 n=9+8)
RegexpMatchEasy0_1K-12       239ns ± 3%     239ns ± 1%    ~     (p=0.204 n=10+10)
RegexpMatchEasy1_32-12      71.4ns ± 1%    70.6ns ± 0%  -1.15%   (p=0.000 n=10+9)
RegexpMatchEasy1_1K-12       383ns ± 2%     390ns ±10%    ~       (p=0.181 n=8+9)
RegexpMatchMedium_32-12      114ns ± 0%     113ns ± 1%  -0.88%    (p=0.000 n=9+8)
RegexpMatchMedium_1K-12     36.3µs ± 1%    36.8µs ± 1%  +1.59%   (p=0.000 n=10+8)
RegexpMatchHard_32-12       1.90µs ± 1%    1.90µs ± 1%    ~     (p=0.341 n=10+10)
RegexpMatchHard_1K-12       59.4µs ±11%    57.8µs ± 1%    ~      (p=0.968 n=10+9)
Revcomp-12                   461ms ± 1%     462ms ± 1%    ~       (p=1.000 n=9+9)
Template-12                 67.5ms ± 1%    66.3ms ± 1%  -1.77%   (p=0.000 n=10+8)
TimeParse-12                 314ns ± 3%     309ns ± 0%  -1.56%    (p=0.000 n=9+8)
TimeFormat-12                340ns ± 2%     331ns ± 1%  -2.79%  (p=0.000 n=10+10)

The go binary is 0.2% larger.  Not really sure why the size
would change.

Change-Id: Ia5116e53a3aeb025ef350ffc51c14ae5cc17871c
Reviewed-on: https://go-review.googlesource.com/34822
Reviewed-by: David Chase <[email protected]>

Author: dr2chase

src/cmd/compile/internal/ssa/dom.go

@@ -296,7 +296,8 @@ func dominatorsSimple(f *Func) []*Block {
 // intersect finds the closest dominator of both b and c.
 // It requires a postorder numbering of all the blocks.
 func intersect(b, c *Block, postnum []int, idom []*Block) *Block {
-	// TODO: This loop is O(n^2). See BenchmarkNilCheckDeep*.
+	// TODO: This loop is O(n^2). It used to be used in nilcheck,
+	// see BenchmarkNilCheckDeep*.
 	for b != c {
 		if postnum[b.ID] < postnum[c.ID] {
 			b = idom[b.ID]

src/cmd/compile/internal/ssa/func.go

@@ -104,6 +104,31 @@ func (f *Func) newValue(op Op, t Type, b *Block, pos src.XPos) *Value {
 	return v
 }
 
+// newValueNoBlock allocates a new Value with the given fields.
+// The returned value is not placed in any block.  Once the caller
+// decides on a block b, it must set b.Block and append
+// the returned value to b.Values.
+func (f *Func) newValueNoBlock(op Op, t Type, pos src.XPos) *Value {
+	var v *Value
+	if f.freeValues != nil {
+		v = f.freeValues
+		f.freeValues = v.argstorage[0]
+		v.argstorage[0] = nil
+	} else {
+		ID := f.vid.get()
+		if int(ID) < len(f.Config.values) {
+			v = &f.Config.values[ID]
+		} else {
+			v = &Value{ID: ID}
+		}
+	}
+	v.Op = op
+	v.Type = t
+	v.Block = nil // caller must fix this.
+	v.Pos = pos
+	return v
+}
+
 // logPassStat writes a string key and int value as a warning in a
 // tab-separated format easily handled by spreadsheets or awk.
 // file names, lines, and function names are included to provide enough (?)