Merge pull request #4 from esp8266/esp8266

Esp8266

Author: me-no-dev

README.md

@@ -102,9 +102,9 @@ This is mostly similar to WiFi shield library. Differences include:
 - ```WiFi.RSSI()``` doesn't work
 - ```WiFi.printDiag(Serial);``` will print out some diagnostic info
 - ```WiFiUDP``` class supports sending and receiving multicast packets on STA interface.
-When sending a multicast packet, replace ```udp.beginPacket(addr, port)``` with 
+When sending a multicast packet, replace ```udp.beginPacket(addr, port)``` with
 ```udp.beginPacketMulticast(addr, port, WiFi.localIP())```.
-When listening to multicast packets, replace ```udp.begin(port)``` with 
+When listening to multicast packets, replace ```udp.begin(port)``` with
 ```udp.beginMulticast(WiFi.localIP(), multicast_ip_addr, port)```.
 You can use ```udp.destinationIP()``` to tell whether the packet received was
 sent to the multicast or unicast address.
@@ -118,7 +118,7 @@ You can see more commands here: [http://www.arduino.cc/en/Reference/WiFi](http:/
 
 Library for calling functions repeatedly with a certain period. Two examples included.
 
-It is currently not recommended to do blocking IO operations (network, serial, file) from Ticker 
+It is currently not recommended to do blocking IO operations (network, serial, file) from Ticker
 callback functions. Instead, set a flag inside the ticker callback and check for that flag inside the loop function.
 
 #### EEPROM ####
@@ -184,6 +184,11 @@ Allows the sketch to respond to multicast DNS queries for domain names like "foo
 Currently the library only works on STA interface, AP interface is not supported.
 See attached example and library README file for details.
 
+#### DNS server (DNSServer library) ####
+
+Implements a simple DNS server that can be used in both STA and AP modes. The DNS server currently supports only one domain (for all other domains it will reply with NXDOMAIN or custom status code). With it clients can open a web server running on ESP8266 using a domain name, not an IP address.
+See attached example for details.
+
 #### Servo ####
 
 This library exposes the ability to control RC (hobby) servo motors. It will support upto 24 servos on any available output pin. By defualt the first 12 servos will use Timer0 and currently this will not interfere with any other support.  Servo counts above 12 will use Timer1 and features that use it will be effected.
@@ -212,10 +217,10 @@ You need to put ESP8266 into bootloader mode before uploading code.
 For stable use of the ESP8266 a power supply with 3V3 and >= 250mA is required.
 
 * Note
- - using Power from USB to Serial is may unstable, they not deliver enough current. 
- 
+ - using Power from USB to Serial is may unstable, they not deliver enough current.
+
 #### Serial Adapter ####
- 
+
 There are many different USB to Serial adapters / boards.
 
 * Note
@@ -224,17 +229,17 @@ There are many different USB to Serial adapters / boards.
  - not all board have all pins of the ICs as breakout (check before order)
  - CTS and DSR are not useful for upload (they are Inputs)
 
-* Working ICs 
+* Working ICs
  - FT232RL
  - CP2102
  - may others (drop a comment)
-  
+
 #### Minimal hardware Setup for Bootloading and usage ####
 
 ESPxx Hardware
 
 | PIN           | Resistor | Serial Adapter |
-| ------------- | -------- | -------------- | 
+| ------------- | -------- | -------------- |
 | VCC           |          | VCC (3.3V)     |
 | GND           |          | GND            |
 | TX or GPIO2*  |          | RX             |
@@ -244,19 +249,19 @@ ESPxx Hardware
 | GPIO15*       | PullDown |                |
 | CH_PD         | PullUp   |                |
 
-* Note 
+* Note
  - GPIO15 is also named MTDO
  - Reset is also named RSBT or REST (adding PullUp improves the stability of the Module)
  - GPIO2 is alternative TX for the boot loader mode
- 
+
 ###### esp to Serial
 ![ESP to Serial](https://raw.githubusercontent.com/Links2004/Arduino/esp8266/docs/ESP_to_serial.png)
 
 #### Minimal hardware Setup for Bootloading only ####
 ESPxx Hardware
 
 | PIN           | Resistor | Serial Adapter  |
-| ------------- | -------- | --------------- | 
+| ------------- | -------- | --------------- |
 | VCC           |          | VCC (3.3V)      |
 | GND           |          | GND             |
 | TX or GPIO2   |          | RX              |
@@ -266,15 +271,15 @@ ESPxx Hardware
 | GPIO15        | PullDown |                 |
 | CH_PD         | PullUp   |                 |
 
-* Note 
+* Note
 	- if no RTS is used a manual power toggle is needed
-	 
+
 #### Minimal hardware Setup for running only ####
 
 ESPxx Hardware
 
 | PIN           | Resistor | Power supply    |
-| ------------- | -------- | --------------- | 
+| ------------- | -------- | --------------- |
 | VCC           |          | VCC (3.3V)      |
 | GND           |          | GND             |
 | GPIO0         | PullUp   |                 |
@@ -285,7 +290,7 @@ ESPxx Hardware
 ![ESP min](https://raw.githubusercontent.com/Links2004/Arduino/esp8266/docs/ESP_min.png)
 
 ###### improved stability
-![ESP improved stability](https://raw.githubusercontent.com/Links2004/Arduino/esp8266/docs/ESP_improved_stability.png)	
+![ESP improved stability](https://raw.githubusercontent.com/Links2004/Arduino/esp8266/docs/ESP_improved_stability.png)
 
 ### Issues and support ###
 
@@ -306,5 +311,3 @@ Esptool written by Christian Klippel is licensed under GPLv2, currently maintain
 ESP8266 core support, ESP8266WiFi, Ticker, ESP8266WebServer libraries were written by Ivan Grokhotkov, [email protected].
 
 [SPI Flash File System (SPIFFS)](https://github.com/pellepl/spiffs) written by Peter Andersson is used in this project. It is distributed under MIT license.
-
-

hardware/esp8266com/esp8266/cores/esp8266/Arduino.h

@@ -209,13 +209,15 @@ void loop(void);
 // This comes from the pins_*.c file for the active board configuration.
 #define digitalPinToPort(pin)       (0)
 #define digitalPinToBitMask(pin)    (1UL << (pin))
+#define digitalPinToTimer(pin)      (0)
 #define portOutputRegister(port)    ((volatile uint32_t*) GPO)
 #define portInputRegister(port)     ((volatile uint32_t*) GPI)
 #define portModeRegister(port)      ((volatile uint32_t*) GPE)
 
 #define NOT_A_PIN -1
 #define NOT_A_PORT -1
 #define NOT_AN_INTERRUPT -1
+#define NOT_ON_TIMER 0
 
 #ifdef __cplusplus
 } // extern "C"

hardware/esp8266com/esp8266/cores/esp8266/core_esp8266_eboot_command.c

@@ -60,7 +60,7 @@ int eboot_command_read(struct eboot_command* cmd)
     }
 
     uint32_t crc32 = eboot_command_calculate_crc32(cmd);
-    if (cmd->magic & EBOOT_MAGIC_MASK != EBOOT_MAGIC || 
+    if ((cmd->magic & EBOOT_MAGIC_MASK) != EBOOT_MAGIC ||
         cmd->crc32 != crc32) {
         return 1;
     }

hardware/esp8266com/esp8266/cores/esp8266/core_esp8266_flash_utils.c

@@ -28,7 +28,7 @@
 
 int SPIEraseAreaEx(const uint32_t start, const uint32_t size)
 {
-    if (start & (FLASH_SECTOR_SIZE - 1) != 0) {
+    if ((start & (FLASH_SECTOR_SIZE - 1)) != 0) {
         return 1;
     }
 

hardware/esp8266com/esp8266/cores/esp8266/core_esp8266_main.cpp

@@ -129,7 +129,7 @@ void user_init(void) {
     uart_div_modify(0, UART_CLK_FREQ / (74480));
 
     system_rtc_mem_read(0, &resetInfo, sizeof(struct rst_info));
-    if(resetInfo.reason == WDT_RST_FLAG || resetInfo.reason == EXCEPTION_RST_FLAG) {
+    if(resetInfo.reason == REASON_WDT_RST || resetInfo.reason == REASON_EXCEPTION_RST) {
         os_printf("Last Reset:\n - flag=%d\n - Fatal exception (%d):\n - epc1=0x%08x,epc2=0x%08x,epc3=0x%08x,excvaddr=0x%08x,depc=0x%08x\n", resetInfo.reason, resetInfo.exccause, resetInfo.epc1, resetInfo.epc2, resetInfo.epc3, resetInfo.excvaddr, resetInfo.depc);
     }
     struct rst_info info = { 0 };

hardware/esp8266com/esp8266/cores/esp8266/spiffs/spiffs_config.h

@@ -19,8 +19,8 @@
 #define c_memset os_memset
 
 typedef signed short file_t;
-typedef long int s32_t;
-typedef long unsigned int u32_t;
+typedef int32_t s32_t;
+typedef uint32_t u32_t;
 typedef int16_t s16_t;
 typedef uint16_t u16_t;
 typedef int8_t s8_t;

hardware/esp8266com/esp8266/libraries/DNSServer/examples/DNSServer/DNSServer.ino

@@ -0,0 +1,28 @@
+#include <ESP8266WiFi.h>
+#include <DNSServer.h>
+
+const byte DNS_PORT = 53;
+IPAddress apIP(192, 168, 1, 1);
+DNSServer dnsServer;
+
+void setup() {
+  WiFi.mode(WIFI_AP);
+  WiFi.softAPConfig(apIP, apIP, IPAddress(255, 255, 255, 0));
+  WiFi.softAP("DNSServer example");
+
+  // modify TTL associated  with the domain name (in seconds)
+  // default is 60 seconds
+  dnsServer.setTTL(300);
+  // set which return code will be used for all other domains (e.g. sending
+  // ServerFailure instead of NonExistentDomain will reduce number of queries
+  // sent by clients)
+  // default is DNSReplyCode::NonExistentDomain
+  dnsServer.setErrorReplyCode(DNSReplyCode::ServerFailure);
+
+  //start DNS server for a specific domain name
+  dnsServer.start(DNS_PORT, "www.example.com", apIP);
+}
+
+void loop() {
+  dnsServer.processNextRequest();
+}

hardware/esp8266com/esp8266/libraries/DNSServer/library.properties

@@ -0,0 +1,9 @@
+name=DNSServer
+version=1.0.0
+author=Kristijan Novoselić
+maintainer=Kristijan Novoselić, <[email protected]>
+sentence=A simple DNS server for ESP8266.
+paragraph=This library implements a simple DNS server.
+category=Communication
+url=
+architectures=esp8266

hardware/esp8266com/esp8266/libraries/DNSServer/src/DNSServer.cpp

@@ -0,0 +1,133 @@
+#include "DNSServer.h"
+#include <lwip/def.h>
+#include <Arduino.h>
+
+DNSServer::DNSServer()
+{
+  _ttl = htonl(60);
+  _errorReplyCode = DNSReplyCode::NonExistentDomain;
+}
+
+bool DNSServer::start(const uint16_t &port, const String &domainName,
+                     const IPAddress &resolvedIP)
+{
+  _port = port;
+  _domainName = domainName;
+  _resolvedIP[0] = resolvedIP[0];
+  _resolvedIP[1] = resolvedIP[1];
+  _resolvedIP[2] = resolvedIP[2];
+  _resolvedIP[3] = resolvedIP[3];
+  downcaseAndRemoveWwwPrefix(_domainName);
+  return _udp.begin(_port) == 1;
+}
+
+void DNSServer::setErrorReplyCode(const DNSReplyCode &replyCode)
+{
+  _errorReplyCode = replyCode;
+}
+
+void DNSServer::setTTL(const uint32_t &ttl)
+{
+  _ttl = htonl(ttl);
+}
+
+void DNSServer::stop()
+{
+  _udp.stop();
+}
+
+void DNSServer::downcaseAndRemoveWwwPrefix(String &domainName)
+{
+  domainName.toLowerCase();
+  domainName.replace("www.", "");
+}
+
+void DNSServer::processNextRequest()
+{
+  _currentPacketSize = _udp.parsePacket();
+  if (_currentPacketSize)
+  {
+    _buffer = (unsigned char*)malloc(_currentPacketSize * sizeof(char));
+    _udp.read(_buffer, _currentPacketSize);
+    _dnsHeader = (DNSHeader*) _buffer;
+
+    if (_dnsHeader->QR == DNS_QR_QUERY &&
+        _dnsHeader->OPCode == DNS_OPCODE_QUERY &&
+        requestIncludesOnlyOneQuestion() &&
+        getDomainNameWithoutWwwPrefix() == _domainName)
+    {
+      replyWithIP();
+    }
+    else if (_dnsHeader->QR == DNS_QR_QUERY)
+    {
+      replyWithCustomCode();
+    }
+
+    free(_buffer);
+  }
+}
+
+bool DNSServer::requestIncludesOnlyOneQuestion()
+{
+  return ntohs(_dnsHeader->QDCount) == 1 &&
+         _dnsHeader->ANCount == 0 &&
+         _dnsHeader->NSCount == 0 &&
+         _dnsHeader->ARCount == 0;
+}
+
+String DNSServer::getDomainNameWithoutWwwPrefix()
+{
+  String parsedDomainName = "";
+  unsigned char *start = _buffer + 12;
+  if (*start == 0)
+  {
+    return parsedDomainName;
+  }
+  int pos = 0;
+  while(true)
+  {
+    unsigned char labelLength = *(start + pos);
+    for(int i = 0; i < labelLength; i++)
+    {
+      pos++;
+      parsedDomainName += (char)*(start + pos);
+    }
+    pos++;
+    if (*(start + pos) == 0)
+    {
+      downcaseAndRemoveWwwPrefix(parsedDomainName);
+      return parsedDomainName;
+    }
+    else
+    {
+      parsedDomainName += ".";
+    }
+  }
+}
+
+void DNSServer::replyWithIP()
+{
+  _dnsHeader->QR = DNS_QR_RESPONSE;
+  _dnsHeader->ANCount = _dnsHeader->QDCount;
+  _dnsHeader->QDCount = 0;
+
+  _udp.beginPacket(_udp.remoteIP(), _udp.remotePort());
+  _udp.write(_buffer, _currentPacketSize);
+  _udp.write((unsigned char*)&_ttl, 4);
+  // Length of RData is 4 bytes (because, in this case, RData is IPv4)
+  _udp.write((uint8_t)0);
+  _udp.write((uint8_t)4);
+  _udp.write(_resolvedIP, sizeof(_resolvedIP));
+  _udp.endPacket();
+}
+
+void DNSServer::replyWithCustomCode()
+{
+  _dnsHeader->QR = DNS_QR_RESPONSE;
+  _dnsHeader->RCode = (unsigned char)_errorReplyCode;
+  _dnsHeader->QDCount = 0;
+
+  _udp.beginPacket(_udp.remoteIP(), _udp.remotePort());
+  _udp.write(_buffer, sizeof(DNSHeader));
+  _udp.endPacket();
+}